I have a spreadsheet that runs a macro resulting in a different number of rows everytime the macro is run. Columns H, I & J are the only columns with currency in them. I would like a macro to find the bottom-most row of currency data in these columns and insert the Auto-sum formula in the row directly below each of these 3 columns. Then bold this row and increase the font by 2 points (or 12).
View 13 Replies
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column <> 1 Then Exit Sub
Application.EnableEvents = False
[Code].....
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
Scenario 1-AIF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR…
Scenario 1-BIF the number of days difference is MORE than 7 days, highlight the cells in the "Vacation Ended" column and "Number of Days" column GREY..................................
Can I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
View 2 Replies View Related Lets say we have prices in column (B) and in column (F) I want to insert a formula that says:
In the same row, look at cell in column (B). If price is between 1000 and 8000 then put 2.00 if price is between 500-999 then put 0.50 if price is between 1-499 then put 0.00
I need to achieve this using something like =OFFSET(INDIRECT(ADDRESS(ROW(), COLUMN())),0,-1) but I am not sure how its done.
I will be using this formula in a find and replace macro. So I can NOT make the typical drag and fill formula.
write code to post Excel data directly to Peachtree using VBA rather than the export/ import process?
View 5 Replies View RelatedI have a large list like this:
A 1
B 2
C 3
D 4
E 5
I need only values pertaining to C and D. How do I sort the columns so it becomes like:
C 3
D 4
The rest I don't need.
I've populated a temporary worksheet with several columns of data. In this example my Amount Column has several null cells. What I need to do is write a macro to find any nulls and populate the nulls with the data in the last populated cell above it.
Example: the four empty cells below Account (524150) also need to be populated with 524150. The cell immediately below 524200 also needs to be populated with 524200 and the 3 empty cells below 512800 also need to be populated with 512800. Week to week the number of rows will change and the nulls will also change.
I've been using Excel for years and had very few issues. However, I recently went into a spreadsheet to update it and was unable to select and enter data into an individual cell. When I click on a cell and try to enter #s nothing happens (my num lock is on). Then when I try to click into another cell it just highlights that cell, along with any other that I move my cursor over. Once I click on one cell I can't stop the highlighting from happening. I can't even click on anything in the toolbar.
View 14 Replies View RelatedAfter recording a macro that goes to last figure in data, how do I edit this to prompt for a new data value and enter it into 1st empty cell at end of data?
View 8 Replies View RelatedI have 13 columns - 12 representing each month of the year and then a total. I start in F15 with Jan and end in R15 with the total - this is the heading row.
Below that I have my numbers for each month. Here's what I need to do: Anytime the total changes (by updating the monthly numbers), I need the day's date to be automatically entered into F14. This way I know the last time the data was changed.
After recording a macro that goes to last figure in data, how do I edit this to prompt for a new data value and enter it into 1st empty cell at end of data?
View 6 Replies View RelatedI have a developed a UserForm to enter data into Excel. I can get the UserForm to enter data in row2 under the headings I have created. I have a Next button on the UserForm, which I want to go to the next row when pressed to enter dta in row3, then row4 etc. Is there anywhere I can find examples of how to do this?
View 9 Replies View RelatedI have copied my first sheet into multiple sheets. Now when I enter data in one it shows up in all of them. How do I stop this from happening? I have cleared out any content in them and the formula bar is blank in every line.
View 3 Replies View RelatedI have a macro that
- copies rows from one sheet into another sheet based on a set of criteria
- the very very very first time the macro is run, the first row of data should be put into row 7 (formatting reasons)
- however, every other time it's run it should paste into the next clear row.
But, what is happening is that, each time its run, it puts the data into row 7 => overwriting data.
I've used the offset and counter function but perhaps I need to put it in the header of the code to get it working?
My code pasted below:
[Code] .....
Please find attached.I have two sheets. In sheet 3 I will enter data. It must record on corresponding date & column in sheet 4.
Book2.xlsx‎
I am trying to have a macro send the data from sheet 2 to sheet 3, record the data then next time shift down a row and enter the new data below and below every time new data is entered.
I have recorded a macro, but I am stuck with the recording the data and then returning to a new row.
Is there a way to add data into a cell that already had a formula? Lets say in cell A1 we have a formula like "=A1*A2". Would I be able to some how enter a value into cell A1 without changing the formula?
Example: enter value "5" into A2 and value "10" into A1 which would result in A1 value being "50" after value is entered.
I know that this creates a circular error but is there any other way to accomplish this?
I need a simple macro to enter data for hours worked, but don't like the inputbox.
I need to enter the Emp Nbr in B1.
AM in Time in B3
AM out Time in B4
PM in Time in B7
PM out Time in B8
I then write down the hours worked and
Return to B1
When I enter an new number, I want it to put 0 in B3,B4,B7 and B8
(see attached) Oops can't post. There is probably a better way to calculate the sub-totals, but this works except on an enter of 1200
I know I can put an IF formular into B1 =if(A1="sat",D/O,0) but obviously if people enter data to this cell i.e time they worked the formula goes is there anyway I can put a formular into C1 but have the result entered into B1?
A1 sat
B1 D/O
C1
Have a drop down list in B2 but if what they want is not in the list the can select "other",
If this happens i want to force them to enter something into the next cell B3.
Is it possible to have a formula in a cell which can be overwritten by manually entering in a number, but if the manually entered number is deleted, the formula remains in the cell.
View 9 Replies View RelatedI have an excel sheet with a few columns, Column (1) has data entered for ever row (with a name.) Column (2) has a few random cells with data (names) about 30% and the rest are left blank. What I need, is to have a formula in a new column (3) that will put in the the data (names) of column (2) and then if there isnt data in column (2) then it will put the Data (names) from column (1). (ps, If i cant get this figured out, we have to buy a custom interface and it will cost around $7000,)
View 2 Replies View RelatedI have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.
Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)
In the Worksheet the 3 Columns are
A C E
Part Price Vendor
I have designed a project sheet that shows Project,tasts,start & end dates, with cells being highlighted via conditional formatting using the between format, What i would like is for the macro that i recorded to enter the data(which is c/f to a new row, At present when i run macro it reruns on the same row,the filldwn method dosn't work either, For design layout i have based it on microsoft project
I have multiple sheets in a workbook. The sheets are protected as this workbook is used by other users also. I need to enter same data in column E of around 15 sheets. I select multiple sheets with ctrl+ or shft+click method and enter the data in the required cells. The problem is after selecting multiple worksheets, I'm not able to enter any text but I can enter numbers. When I remove the protection from all the sheets it is possible to enter either text or numbers.
View 4 Replies View RelatedI have a huge (for a newbie ) spreadsheet where every item is associated with several key words. There about 500 key words, all in the same column, and I have to build a table identifying the total frequency of each key word. Basically, the first column of the table I've created lists all the possible key words, and the second one is all the COUNTIF formulae, each one being associated with its corresponding key word. The formula I need to use is this one :
=COUNTIF($D$2:$D$8486;"corresponding key word from column 1")
The formula works well and my table looks fine, but the task of copying and pasting 500 key words into each occurrence of the formula is pretty daunting! is there an automatic way to enter each key word into the corresponding formula without having to do it manually? Otherwise, is there a more direct way or another formula that would give me the information I need? Surely there's a more efficient way to do this, but I just don't know how!
I have created a spreadsheet which uses a User Form to input data and then give it a reference number (this bit works fine).
I am now trying to use a User Form to enter a reference number which will then be searched across my spreadsheet, I then want all the entered data relevant to that reference number to appear in a User Form along with additional fields for entry of additional info.
In this User Form, the original data could be modified but more importantly, the remaining data added before then being placed into the main spreadsheet.
This is a booking in system where the person presents to a receptionist and the initial data is entered. Once that person has been dealt with, the remaining details regarding their visit will need to be inputted, hence this request.
Basically, I have a simple - but large (48Mb) sheet with UK mileage distances between towns. As the are 1,000 towns and therefore 1,000,000 cells of data it is a little tedious to scroll to the desired town. see sample attached (this is not the real file obviously!)
What I would like to do is type in a start and end point, and have Excel look for the intersection and display the value of this.
I have started a user form called submit stock. What i am trying to work out is if i can use this form to enter the data to the worksheet using the form to specific columns depending on the first choice.
View 8 Replies View Related
