Userform To Enter Data In Different Locations Depending On Selected Options
Jan 22, 2009
MONDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
TUESDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
WEDNESDAY
xxxxxxxxxxxxxTeam1 | Team2 | Team3 | Team4 etc.
Hours State1
-
Hours State2
-
Hours State3
-
etc.
Each team leader would then input hours in each state each day on their column. Make sense? Easy Peasy...
My question........... is it posible to have a userform where a TL would select their name (Column) and Day (Monday=Row 3, Tuesday=Row23 etc) from a dropdown and then input figures in txt boxes to submit them in the correct location?
I'm inputting data in E3 and after I hit enter I want B2 to be selected. But only for E3 and only in one worksheet. And possibly a further step... Sometimes the formula in B2 has picked up data from another place depending on what value was entered in E3. If it's done this then I won't need to go to B2, I'd want to go to A8 after E3 instead of B2.
Have got a userform with four checkboxes representing specific salary bands. What I have tried to do is to filter the data according to options chosen, but the code seems not to be working.
Code: Private Sub UserForm_Initialize() With Me.CheckBox1 .TextAlign = fmTextAlignLeft End With With Me.CheckBox2 .TextAlign = fmTextAlignLeft
I have a sheet with a country in it in A1 (validation list).
Depending on the country in A1 a country specific IF command has to be executed on a column1 with first cel = A3. This IF command also relies on the values in column 2 and 3 on the same row. (B3 and C3 are in the IF cmd)
I taught to do it like this : =IF($A$1="Spain";$A$5;0) with A5 being the country specific IF command which should be executed when spain is selected. however when I do this, this only works for the first cell ( I cannot drag this formule down, since it will always give the value calculated in column 2 and 3 on row1.
I'm not sure if the best way to 'select' the country specific IF cmd is with another IF command..
I need to build a formula to have one cell display multiple options depending on a value in another box.
If Value is >x and <x display Y
Details:
Cell D5 Holds a dollar amount. E5 is where the calculation will happen. Logically i need it to do the following exactly:
If D5 is between 5000 and 9999, display 75. If D5 is between 10000 and 14999 display 150. If D5 is between 15000 and 19999 display 200. If D5 is >20000 display 250.
I have a developed a UserForm to enter data into Excel. I can get the UserForm to enter data in row2 under the headings I have created. I have a Next button on the UserForm, which I want to go to the next row when pressed to enter dta in row3, then row4 etc. Is there anywhere I can find examples of how to do this?
I have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.
Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)
In the Worksheet the 3 Columns are A C E Part Price Vendor
I have created a spreadsheet which uses a User Form to input data and then give it a reference number (this bit works fine).
I am now trying to use a User Form to enter a reference number which will then be searched across my spreadsheet, I then want all the entered data relevant to that reference number to appear in a User Form along with additional fields for entry of additional info.
In this User Form, the original data could be modified but more importantly, the remaining data added before then being placed into the main spreadsheet.
This is a booking in system where the person presents to a receptionist and the initial data is entered. Once that person has been dealt with, the remaining details regarding their visit will need to be inputted, hence this request.
I have started a user form called submit stock. What i am trying to work out is if i can use this form to enter the data to the worksheet using the form to specific columns depending on the first choice.
is it possible to enter data on a spredsheet while a form is opened or must the from be closed first. I thought I was smart to have a form remain open so users could change parameters but at the same time allow them to enter data in uprotected cells.
I have a userform that numerous people need to fill in. I want to add a login function so that each person has their own login detail. Their will be a command button called login. Until they login in they cannot enter any data.
I’ve created a worksheet containing many drop down lists that form an inventory of household effects. Once selected, I’d like to be able to view/print the selected options and quantities separately on one A4 page.
I don’t want the separately viewed/ printed page to contain anything other than the selected options. The problem I’m having is to arrange this new page as a contiguous list.
I need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following: Within a workbook the 1st sheet is the data entry. In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example: Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry. G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I have a spreadsheet which is attached. I want text to be entered into column A only if there is text in column B. The text to be entered is taken from a cell in another workbook. I have removed the lin to up it to this fourm.
i want to do following items : 1. when i am in textbox1 and press TAB button from keyboard then cursor go to Textbox2 2. when i am in textbox2 and press TAB (keyboard) then select commandButton1 3. when i am in textbox2 and press enter button (Keyboard) then run the macro of commandButton1 click event.
Actully above VBA object in excel sheet and i am not useing any fram for them .
I have the following VB macro that runs after user presses OK on a userform. I don't think it's written correctly. I would like a prompt that gives two options (either yes to return a null value if they've left a field blank, or return user to a reset userform1 if they select no.)
Private Sub CommandButton1_Click()
If Me.TextBox1.Value = "" Then MsgBox ("You Must Enter a Part Number (eg. 1007821-12)") Unload UserForm1 Calculate UserForm1.Show End If If Me.TextBox2.Value = "" Then MsgBox ("You Must Enter a Lot Number (eg. 6020631)")............
I have a cell in my spreadsheet that I use to control the size of a column. I formatted the cell as a number and added data validation to make sure the number is greater than zero. Then I realized that I need to also allow for the option of auto sizing the column as well. This would require a data validation list type with something like True and False for the choices.
What I want to be able to do is have it both ways. I want a drop down list in that cell with the options Auto Size or Custom. If Auto Size is selected the cell value gets set to that. If Custom is selected I then want to be able to type in a number.
ddl.png
[URL]
Is there a way to setup a cell such that the value is either an item from the drop down list or, entered directly (depending on the list selection)?
I know I can do it with dependent lists but that would require two cells, one for the auto size mode (true/false) and the other for manual width value.
I have a Userform which has a series of Frames that contain Option Buttons. What I would like to do is check that an option button in each of the frames has been selected. If there are any missing then I need to inform the user - I would like all frames to be checked at the same time on the click of a button.
Im looking for a macro that can get a cell RANGE, the data in the RANGE will be copied then if the checkbox is selected it will copy the same data in the RANGE and add the selected checkbox in next column
I have column A and Column B < this is my selected range
Capture1.PNG
I will have a form that has checkbox and buton.
When all the checkbox is selected. when the button is click. the result will be.
I am having issues with this Macro since I have to run it on computers only supporting Excel 2003 and computers with Excel 2007. The Macro in use is as follows: --------------------------------------------------------------------------------------------------------------------------------
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this. The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value 'If FindRemove = "" Then End
' Goes to the start of the Data column 'Sheets("Staff").Select 'Range("B4").Select
' Tests current cell against FindRemove 'Do 'If ActiveCell.Value = FindRemove Then 'Call CopyPerson 'Exit Sub 'Else: ActiveCell.Offset(1, 0).Select 'End If 'Loop Until ActiveCell.Value = "" 'End Sub
What I would like to do with the information that I have put together on a different workbook is to reference an Agent (column A), and a time range (Date is in column D) and then copy the row from A to I for each occurrence during that range of dates so we can see how many and what errors have occurred during any range of dates selected. (I will have different people inputting errors at different times so the dates will not be sorted unless they have to be). I want to be able to select different agents/date ranges to be able to get a glance of how that particular agent did during this time frame.
Here is an example of the work sheet where the data is originaly.
[Removed]
Here is an example (in a different workbook) of what the sheet should look like if I was searching errors for Albert Ozier between 1/25/2010 and 1/28/2010.
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Column <> 1 Then Exit Sub Application.EnableEvents = False
Using macro's on Excel 2010. What I'm trying to do is create a macro that will copy a range of cells from one sheet to another depending on a option being selected from a drop down box. I've tried to use formulas but without success. sheet 1 contains a list of approx 20 people with rows containing sales figures per week.
Is it possible to have a macro that will copy the rows to sheet2 depending on the dropdown? The drop down has already been setup with people's names
E.g. if sheet 1, cell a1 (with data validation setup) dropdown contains "mr smith", copy sheet2 row A1:A9 to sheet 1 cell a2 or if sheet 1, cell a1 dropdown contains "mr cooper", copy sheet2 row B1:B9 to sheet1 cell a2 etc... for each name in the dropdown
The idea is so that i select a dropdown and it copies the sales figures that match the dropdown name, if i then select another dropdown, the corresponding figures are copied to the same place.
Code: Dim i As Long Dim LastRow As Long Dim wsEachSheet As Worksheet Const strDestSheetName As String = "Hold Tickets" Const strDestSheetName2 As String = "Enter Order"
[Code] ........
I don't want to show the location as being the worksheet "Hold Tickets" so i had to remove it from the search, But the data is still important
I need a macro code that will locate the data in "another sheet" and return the values from there, but if it is also present in the worksheet "Hold tickets" then
This part of the code will need to look like this:
I have this series of userform modules that error check the user's input of a date value.
Code: Private Sub txtDate_Enter() txtdate.SelStart = 0 txtdate.SelLength = Len(txtdate.Value)
[Code]....
Everything works fine, but I'm looking to improve it's efficiency. Most people will by habit press [ENTER] after inputting the date in the textbox txtdate control. As it is now, for the code to execute after the value is entered is to push the {SUBMIT} button.
What would I need to do to allow hitting [ENTER] to do the same as clicking submit?