Userform Repaint - TEXTBOX Only
Jan 22, 2010
I have Userform1 that has Commandbutton1, Textbox1 and Textbox2.
Under Commandbutton1_Click is a long code that basically opens a file, manipulate data and loops, etc. Part of this code is to update the value of Textbox2.Text
Now because the code in Commandbutton1 involves opening files and etc, I decided to set set APPLICATION.SCREENUPDATNIG = FALSE.
Problem with this is that it seems the Textbox2.Text.
I learned that if I add Userform1.Repaint. after the line where Textbox2 gets a new value, that the whole userform gets refreshed.
However it would really be optimal if only Textbox2 gets repainted, and not all the objects in the userform1.
Something to the tune of TEXTBOX2.REPAINT
View 9 Replies
ADVERTISEMENT
Jan 18, 2010
I have a large XLS file will a lot of volatile functions (offsets & sumproducts) and I've recently had to add a sheet, making it even bigger. I have a problem that previously occured occasionally but now it happens consistently. Every time the workbook is recalculated, the Excel window is repainted with partial overlays of every visible worksheet. The result is a visual mess. The window's appearance is fixed by doing anything that forces Excel to repaint again, like clicking to another sheet and back. But it has become next to impossible to enter data with automatic calculation turned on.
ScreenUpdating is turned off when my macros run and besides that, I'm not doing anything with worksheet calculation events. I do have a Workbook_SheetChange event subroutine, but that is run *after* the recalculation so it's not the cause.
The problem occurs only when macros are enabled. If I disable macros, Excel behaves normally.
I have two Excel installations and the problem is happening only in Excel 2007 under Vista. It doesn't happen under my Excel 2003 on XP, though I think it may be happening to others with 2003 & XP.
View 14 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
May 23, 2008
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
View 3 Replies
View Related
Apr 26, 2014
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
View 2 Replies
View Related
Nov 22, 2007
I want to populate a textbox (output) on one userform with data from a textbox (target) on another userform.
The data in the textbox (target) is the result of calculations in the userform code and is not gathered from or saved to a cell.
I want the textbox (output) to be populated at "Userform intialize" event.
I have tried various other methods without any success.
View 9 Replies
View Related
Aug 23, 2009
I have a form “RiseSpan” with three TextBoxes, “txtInSpan”, “txtDepth” & txtOutSpan”.
I wish to enter values in “txtInSpan” and “txtDepth”. These values are placed in cells A1 and A2. If both “txtInSpan” and “txtDepth” are greater that zero, I want “txtOutSpan” to show the value of cell C11.
View 9 Replies
View Related
Jun 4, 2014
Want to tab to next textbox in a userform.
Sample workbook has a userform with 4 textboxes.
When I enter something in textbox 1 and then try to tab to the next box, it tabs within the same box.
Attached sample : Form1.xlsm‎
View 3 Replies
View Related
Jun 25, 2006
i have a tabbed userform, that has 13 text boxes on each ,
how can after i have updated one tab unload to a specific cell in excel ?
textbox1 i need value when i "Unload" to b $F$6
textbox2 will be $F$7
textbox3 $F$8
etc etc
but i have no idea how to do this , i have a cmdbutton on bottom ready to unlaod to excel , can anyone start me off on right tracks
also is there a way to when this sheet is opened this userform is shown
View 9 Replies
View Related
Sep 11, 2013
i have couple of textbox in my userform and i want to limit them for 7 number and one letter e.g. 7777777X.
View 2 Replies
View Related
May 8, 2014
How do I get the text to wrap inside the text box? I have the Wordwrap property of the textbox = True.
View 6 Replies
View Related
May 22, 2014
I have textbox1 through textbox8 and all have a number value controlled by their respective spinbutton. The total of those txtbox's adds up into textbox 9, but I currently have a command button to sum the value. would I would like is textbox 9 to update as I'm updating txtbox 1-8 automatically. let me know if possible
View 1 Replies
View Related
Jun 20, 2014
I'm having a problem referring to the value in my text boxes. I'm trying to refer the value in those to certain columns and rows that will be deleted after.
[Code]......
View 7 Replies
View Related
May 16, 2008
After seaching on this and other forums I have not been able to get an answer to this question. Also I know there are a lot of posts out there that sound like this, but none are the same.
My spreadsheet has multiple userforms, which has multiple textboxes. The textboxes are for dates. I have it set so when you double click in the textbox that it calls a calendar function.
Here is the problem.... After you click ok on the calendar form I want the date to go into the textbox that the calendar form was called from. The only way for me to get this to work is to create a seperate calendar form for each textbox that I call the calendar form from.
View 14 Replies
View Related
Oct 20, 2008
I am creating a userform in vba with textboxes. Input (from user) into the textbox is copied to a worksheet in the workbook.
I one text box users will need to type numbers and in another they will need to type letters.
Can the textbox be formatted so it will only allow a number?
Can the text box be formatted to only allow text?
View 6 Replies
View Related
Oct 29, 2008
I have a userform and I want a textbox that counts cells J7,M7,P7,S7,V7. Does anyone know how to write this code and where to put it. All I want is the textbox to show how many cells of these five have data in them and I want it to update automatically.
View 9 Replies
View Related
Nov 10, 2008
I have an userform say frmNew. In the form, I have three textboxes: txtCost, txtRate, txtSale.
The following two boxes are filled by a user:
txtCost contain the Cost of an item (numbers)
txtRate contain the % Rate (3 character), i.e. the txtRate can contain only A,B,C,D,E,F,G,H,I and J. The corresponding value is 1,2,....9,0 respsctively.
If a user enters any numbners or characters other than A,B,..J, a msgbox should popup with a error message.
The value for txtSale is generated by the Macro i.e. txtSale = (txtCost + (txtCost * txtRate)).
View 14 Replies
View Related
Feb 28, 2009
Could anyone offer advice on how I would go about accomplishing this task? I'm trying to format two textbox fields on my userform that when the user inputs data into it, it would automatically show the "symbols, dashes and/or spaces accordingling".
The first textbox field (TextBox9) I need to end up looking like this, with the numbers and/or letters changing by user input.
example: (MI) A000-000-000-000
The next textbox Field (TextBox10) I need to end up with this type of result:
example: (MI ID) A000-000-000-0
I was trying something like this but I'm not familiar enough with the formatting symbols to accomplish this task.
View 14 Replies
View Related
Aug 3, 2009
I am trying to update a Textbox from two Listbox's and several Textbox's as the user enters values (or double clicks the textbox for a value). (DoubleClick code is completed). I have ten textbox's to enter data into (or double click for prior data stored in the registry). Two Listbox's requiring one selection each. The last textbox (textbox11) produces the text as it is being entered from the previous ten, I currently enter the data in a specific order to build my string, which I want to stick to. If the user has entered the wrong data in any of the active textbox's I would like to be able to update the string shown in textbox11 without losing any data from the string.
Hence where my brain cells are popping. My current code (laughing is a pre-requisite). Is in the next two posts due to character length restrictions (no dis intended). Attached is a screen shot of the userform. In the textbox labeled "FCF" all the data you see that is not in any of the textbox's or listbox's is written in from code.
View 4 Replies
View Related
Jan 31, 2010
I'm a bit stuck with one of my userforms. I have a username textbox on my workbook logon screen. I have put a max length on the textbox to 7 characters. I have also added a bit of code which stops the user from entering anything less than 7 characters (once the commandbutton is clicked, a msgbox comes up), and the textbox will show text in upper case.
What I would like is a way to "format" the textbox. All of the usernames will be in the following format: BBAAA11. The first 2 characters will always be "BB". The 3rd, 4th and 5th characters will be any combination of letters (for example... "CAM", "EAL", "BEF"). Finally the last 2 characters will always be any combination of 2 digits (for example... "76" "24", "00").
If someone could provide me with some code which will not allow the textbox to type anything other than the specified format, or for a msgbox to appear once the commandbutton has been clicked to say that the incorrect format has been entered, I will be most grateful.
View 7 Replies
View Related
Feb 10, 2010
Userform1 is a basic search and find using the text the user enters in a text box, followed by 'ok' commandbutton.
If a matching cell is found in the worksheet, the row is selected and the second userform asks for text via textbox2. This text will be placed in the end column of that row (column L) that was found to have the text input in Userform 1.
What's important is that if on that row some text already exists in column L, that this appears in textbox2 allowing the user to modify it.
I'm ok with the search and find :
View 11 Replies
View Related
Mar 9, 2012
How to copy FROM a text box on a user form?
All I seem to be able to find online is people wanting to copy to a text box.
I've tired the basic me.textbox1.copy and it probably works but excel seems to forget what its just copied when I close the userform
Is there any way of adding the contents of textbox1 to the clipboard so it can be pasted in to a word doc or field on an access database?
View 1 Replies
View Related
Apr 25, 2012
I've got a UserForm with 2 textboxes.
TextBox1 requires the user to enter a %.
I don't want the end user to do anything to TextBox2 (I've got it set to Enabled=False). I would like TextBox2 to populate in $$ format based on a formula : TextBox1 % x Range("Sales_Price")
I can get TextBox2 to populate correctly, but I can't get it to convert to $$ format. Everything I've come across uses the 'Exit' or 'AfterUpdate' event - but I don't think I can use these events since the User won't actually be doing anything to TextBox2.
View 1 Replies
View Related
May 1, 2012
I ahve a user form that loads , I would like the textboxes to be red when blank and change white as they are populated.
View 2 Replies
View Related
Mar 14, 2014
I'm trying to make an excel sheet that will fill in labels to a 96 well plate in order to sort and calculate the data. The problem is when i set up the textbox in the user form i want it to pull data on the plate format from cells that have already been filled in using another userform i have created for the standard curve.
My userform has 96 text boxes (one for each well in the plate). They have been named A1 through H12 corresponding to the wells. What I have written is:
Private Sub PlateFormat_Intialize()
A1.Value = Range("Q2").Value
End Sub
with Q2 being the cell in the workbook that it should pull the text from
The userform always loads with the textbox blank.What am i doing wrong? I tried activating the correct sheet in the workbook first that doesn't work. I included a command button where i put the same value code in and then it will update. I don't want to have to update the form however. I want it to load with the cells filled in.
View 5 Replies
View Related
Jul 30, 2007
When my userform is displayed, I would like to have the input field preselected. It is the same as using the Shift-Home key.
I current ly use a shortcut ( Ctrl-M ) to select the sheet and display the userform, as in
Sheets("Select").Activate
Call Worksheets("Select").CommandButton1_Click
UserForm1.TextBox1.Select ' NOT correct
The last line does not work, but it was my stab at the problem
View 9 Replies
View Related
