Using CONC To Create Cell References
Jan 19, 2012
I am not sure if this is even possible, but it would make my life a lot easier if it was.
Currently, I have a formula that goes like this
=IF('SAP DUMP'!A4="","",LEFT(RIGHT('SAP DUMP'!A4,9),8))
What I am asking is, is there anyway to replace the A4 (so the cell reference in SAP DUMP) with a formulae that looks at other cells
For example, I know that every 39 rows is the information I require. So is there anyway to CONC("A"&I4), with I4 being the row reference in the actual formula?
In my mind, it would look something like this
=IF('SAP DUMP'!("A"&I4)="","",LEFT(RIGHT('SAP DUMP'!("A"&I4),9),8))
However, when I try that, it doesn't work.
View 2 Replies
ADVERTISEMENT
Dec 3, 2013
I am using a lot of linked reports that have to be rewritten each month. For example smaller formulas look like this:
=('S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$228*2)+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$262+'S:PUBLICProductionJob CardsMOLDING201311 November[440A SIDE SPOILER JOB CARD.xls]Production Parts'!B$292
What I want to do is extract the file path from the above formula and make it a composite of several cell references.
So what I need is to have a cell where they can change the month and another where we can change the year. So I set up several named cells that look like this:
_MONTH =11 November
_YEAR =2013
_JOBCARD ='S:PUBLICProductionJob CardsMOLDING
_PATH =_JOBCARD & _YEAR &"" &_MONTH
I tried several versions, I am hoping for something like this:
=('_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$228*2)+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$262+'_PATH &"[440A SIDE SPOILER JOB CARD.xls]"Production Parts'!B$292
View 4 Replies
View Related
Nov 25, 2007
It is suppose to be that if the employee is "FT" and has worked >=4 years the return is 15. But if the employee is FT and has worked 2 years but less than 4 years then it is suppose to return 10 (these are days off) Or if the employee is FT and has worked 1 year, but less than 2 then it should return 5 days off. And all the others in the column get no days off.
I have tried to do it with structured references and with cell references I get a column of zeros!
View 9 Replies
View Related
Feb 9, 2010
I am trying to use a macro to copy a set of cells.
I have successfuly created a macro - the problem is I would like the column reference to be absolute but the row reference to be relative. I can have one or the other but not mixed it seems.
If I have not explained myself well, perhaps this may help - I need to copy cells $J1:$S1 and paste them to $L1:$U1
Currently the macros works if the cursor is in cell J1 when I activate the macro but if I move the cursor to any other cell it copies and pastes the wrong set of cells.
View 9 Replies
View Related
Oct 22, 2009
I have a number of statements within the Sheet Event Code (Excel 2007). Three times lately I have added a column and had to go back into the code and find all of the references that needed changing to reflect the new column.
I have been working on this for a couple of days and even tried EE, but to no success.
I have read that Defined Names / Constants should be used as often as possible, but even trying that, the VBA code errors out or "hangs up". Even within Bill Jalen's book (VBA and Macros 2007), there is nothing that addresses this, especially using Intersect.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
On Error GoTo mEnd
Set rng = Sheets("Log").[F14:F10000]
If Not Intersect(rng, Target) Is Nothing Then
If Target = "" Then
With Sheets("Log")
View 9 Replies
View Related
Feb 10, 2014
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
View 1 Replies
View Related
Mar 2, 2009
I am using the dsum formula to sum some values...the formula in B2 is:
=DSUM(BaseSistemasFebrero,"vlfinf",OFFSET('Planes Entidades'!B$1,0,0,COUNTA('Planes Entidades'!B$1:B$49),1))
The Planes Entidades sheet the data is layed out like this: ....
View 9 Replies
View Related
Oct 2, 2009
I'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
View 2 Replies
View Related
Apr 29, 2014
I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]
View 2 Replies
View Related
Jun 15, 2014
Assume I have a cell M24 with a formula like
=M10 + $H24 - $I24*0.35
As you can see B10 is a fix reference (due to omitted $) which should NOT be auto-adjusted but be kept.
Now I want to copy the formular to lots of cells below cell M24. therefore I mark cell M24 and click copy in context menu.
Then I drag/expand the blinking cell border to lets say the 20 cells below. As I result I expect e.g. in cell M25 a formula like
=M10 + $H25 - $I25*0.35
Unfortunately I got
=M11 + $H25 - $I25*0.35
So the fix reference is adjusted as well.
How can I tell Excel 2007 to NOT auto-adjust fix references in formulas?
View 2 Replies
View Related
Mar 2, 2009
I'm using Excel 2003 and I'm trying to make my LINEST function and the source cells for a scatter graph use the cell range specified in another cell in the document. I figured out that it was simple to do the following:
I250 contains: 10, shows: 10
I251 contains: ="I"&I250, shows I10
But I can't figure out how to do this in a larger function. I've tried a few things but none of them work. Here is an example where I want it to do a LINEST with y values in cells Ja - Jb and x values in cells Ia - Ib (where a and b are integers specified in cells I250 and J250 respectively):
View 9 Replies
View Related
Mar 25, 2013
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
Code:
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=""ABS()>.005"""
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority[code].....
View 1 Replies
View Related
Oct 9, 2008
I want to do a search for the amount of people of a certain age in a column, but I want to be able to vary the amount of cells I look in. So first I might want to look for people aged 15 in A3:A35 and then in A3:A55 to see if there is a difference.
Now the optimal way to do this, in my opinion, would be to have a reference that looks like A3:A(B1) and then have the number of the last cell I want to look in in B1, in this case either 35 or 55.
View 4 Replies
View Related
Sep 17, 2009
I'm trying to copy a file from one directory to another directory. However, the source directory, I'd like to have it so it's created from values within specific cells on a Sheet named "PULL".
When trying the following, I get an error permission denied.
View 14 Replies
View Related
Jun 12, 2006
I'm using Excel 2000 and trying to use the datedif function. I've formated 2
columns as date m/dd/yyyy and left the formula column general I'm entering
dates
A1: 1/1/2002
B1: 1/1/2005
I'm entering the formula in C1
=datedif(b1,a1,"M")
I'm looking for the nmber of months between 2 dates
I get #NUM! for a result.
View 11 Replies
View Related
Aug 4, 2009
My macro uses the solver 100 times. Everything is working well, but it's a little bit slow because of all the cell references.
I was wondering if it's possible to use the solver with variables without cell references?
View 4 Replies
View Related
Oct 14, 2008
I'm looking to do something similar to a Paste Special -> Transpose, but rather than pasting values or formulas, I want to paste cell references to the cells that I just transposed.
E.G.
Sheet 1:
A1 = 1
A2 = 3
B1 = 2
B2 = 4
Sheet2:
A1 = Sheet1!A1
A2 = Sheet1!B1
B1 = Sheet1!A2
B2 = Sheet1!B2
This would typically be an easy exercise, but I have a set 205 rows long and 12 columns wide. A little long to do it one by one.
View 9 Replies
View Related
Aug 9, 2009
If I have values in cell B5:B8
B5=0
B6=3
B7=7
B8=10
I want to have a standing formula in Cells J2:M2 that will always reflect whats in those cells. I don't want to use transpose nor do I wnat something as simple as J2=+B5,K2=+B6,etc.
I would like to know if there is a formula that would add the values in a certain row to a cell
For instance:
I want J2 to reflect what is in B5 AND I want K2 To reflect what is in B5 plus a row which would be the value in B6. I have a reason for doing this as I am going to import 120
ranges beginning at a1 to I30 on each sheet while having the sheet I am importing to have these formulas starting at J2.
I tried using +cellnumber+row, but it just gave me the row number and not the actual value in that cell.
View 9 Replies
View Related
May 3, 2006
Here is what I have at present:
At the beginning of a loop, my cursor is positioned on a row. I want to test two cells on that row.
Depending upon the result of the two cells, I want to make the row a certain color.
After that, I then want to move down to the next row, test the same two cells in THAT row, color accordingly and loop again until I reach the bottom of the spreadsheet.
My problem is this:
If I can use a loop that lists various conditions, along with the corresponding statements that color the row accordingly, how can I when finished increment the cell references so that the conditions change to refer to the cells the next row down?
If a loop is not possible, any suggestions you have for solving this problem would be appreciated. I have about 200 rows so am trying to condense my code; this may be hampering my ability to figure out the solution.
View 9 Replies
View Related
Aug 8, 2007
I am trying to code the following in VBA. Excel Cells have formulae like: '=+BZ165-BZ163-BZ162-BZ160-BZ159-BZ157-BZ153'. Now I want to write code in VBA which will be able to give me the individual cells referenced in this formula: BZ165, BZ163 etc. These names can be stored in individual variables or arrays.
I will then use these for further processing. Note in cases where formula refers to data in another sheet like: '=Projects!P49' or data in another excel like '='C:Documents and SettingshoskopDesktop[Annual.xls]Quarterly'!BA$502': I would like to store the path , file name and sheetname in variables/arrays as well.
Any pointers as to how I should approach this problem?
View 7 Replies
View Related
Dec 20, 2013
Lets say I have two sheets titled "dashboard" and "raw data" in a workbook. Cell A1 in "dashboard" should always show the most up to date data from Row 1 in "Raw Data".
I update "raw data" daily, adding a new column to Row 1. For example December 19 would be A1, December 20 would be B1, December 21 would be C1 etc...How can cell A1 in "Dashboard" always reference the newest cell in Row 1 of "raw data"?
View 2 Replies
View Related
May 13, 2007
I would like to reference cells in another tab in my worksheet, but change the orientation.
For example, in Tab 2, I want to make rows A1:A26 equal to columns A1:Z1. Do I have to click back and forth between worksheets 26 times, or is there a way around this?
View 12 Replies
View Related
Dec 2, 2008
I have a macro that cleans up data on one sheet, text-to-columns, flip rows of data, etc. Another sheet references the cells AFTER the data has been cleaned up. However, I can't put the cell references in from Sheet1 to Sheet2 before I run the macro because it breaks the references.
Just a simple example, Suppose cell A1 contains the formula: =Sheet2!B5.
If I go to Sheet2 and run the macro to clean up the data, when I got back to Sheet1, cell A1 contains: =Sheet2!#REF!
The idea is that this is a template, and the user can input aggregate data, run the macro to clean it up, and then go to the other sheet. I can easily create the macro to add copy/paste between the two sheets, but I'm looking for a cleaner way to do this.
View 4 Replies
View Related
Dec 8, 2008
I'm having problems with the MATCH function. If I use =MATCH(A2,'c:myfile.xlsx'!MyRange,0), it works. A2 is the value that I want to look up. 'c:myfile.xlsx'!MyRange is the full path of a range in an another XLSX.
However, if I assign the file name to a cell and try: =MATCH(A2,A3,0). where A3 has the exact same path as the line that work, Excel returns #N/A. I also tried a match on a range in the same tab of the same spreadsheet, and it didn't work. Is it possible to do what I'm trying to do? The file location of the external XLSX is going to change, and I wish I could just update one cell rather than every single cell that contains a MATCH.
View 5 Replies
View Related
Jan 12, 2009
I have a formula that references data on another spreadsheet with multiple worksheets. I have a new worksheet for each month (Jan, Feb, Mar, ...).
How can I copy formulas in series that keep the cell references the same, but change to the appropriate month. So for the forumula below, I want to fill a series down in a column to represent each month.
Right now I have to go in and edit it to change the month to the next month (i.e. change Jan to Feb.)
An example of the formula is below. In this case, I would want to fill the series down a column and have the months update in series but keep the cell reference the same.
=SUM('[New 2008 sales report linked.xls]Jan'!$M$19,'[New 2008 sales report linked.xls]Jan'!$N$19,'[New 2008 sales report linked.xls]Jan'!$Q$19,'[New 2008 sales report linked.xls]Jan'!$L$47,'[New 2008 sales report linked.xls]Jan'!$K$47,'[New 2008 sales report linked.xls]Jan'!$S$47)
View 4 Replies
View Related
Sep 6, 2009
Is there a way of getting the cell references in a formula change following a change in the content of a cell in the worksheet?
View 9 Replies
View Related
Nov 13, 2013
I'm trying to create a hyperlink inside one workbook from sheet1 to sheet2. The main requirement is that I can copy the formula down and it changes accordingly the hyperlink name cell reference as well as the hyperlink destination. I'm only able to achieve a changing hyperlink name.
I found the following Formula to be useful but I can't seem to change the "B5" as it either handles the cell like text or as a reference of the current sheet.
If I try to leave it without the "" Excel tries to get the value of sheet1 b5 and if I use the Address function the Address input numbers don't change either when I copy them down.
View 4 Replies
View Related
Mar 8, 2014
I have a simple range, say, A1:G1. I want to have another cell, H1, reference whatever rightmost cell in the range contains any data. All the cells in the range will be using text.
So if B1 contains data, I want H1 to show what's in B1, but if data is inputted into F1, I now want H1 to show what's in F1.
View 6 Replies
View Related
May 15, 2009
I have a need to match a reference cell to a list of cells. How do I get it to match the exact contents of the reference cell, not just whichever is closest?
I'm attaching the sheet, it's important that the contents of A13 match a string in the AG column exactly or return a null or "none" or whatever.
View 3 Replies
View Related
Jul 26, 2009
I'm using a lot of "activeCell.offset(row,col).address" type of entries to form formulas for me. All of the references come across as Absolute References - $G$24, for example. Is there a different way for activeCell to give me a "normal" address ('G24' vice '$g$24') or a function that will convert for me?
View 2 Replies
View Related
