I have a sheet that has 4500 items on it and want to create a new sheet so I can type in a part number and get the information on the row that number is on.
so in the (new blank sheet) cell a3 will be the input cell and cell a5 to a9 will show the data.
I am running an Index, Match off of totals, what I would like to do is when the formula finds the column_index_num to move up one row and bring that value back.
For example: if I am going to sheet2 and my formula would normally pull back the information on row 7 with a column_index_num of 5 (or column E), I want to bring back the information on row 6 column E.
How do I add the variable to bring back the information one cell above?
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
View 2 Replies View RelatedMy issue concerns going down rows in a data set. Due to the fact that the data set I am pulling from is not standardized, and roughly 10% of the data set has two extra rows of extraneous data below the reference cell (foreign currency balances which I don't need). The point in my formula is the "+2" (down two rows) condition. I needed it so that the "+2" is replaced with a condition inwhich after the reference cell in the INDEX( and MATCH( function is found the command goes down rows until the term "USD" is found. My formula is as follows:
{=IFERROR(INDEX('SHEET1'!$A$9:$O$10000,MATCH((RIGHT(C7,8)),(LEFT('SHEET1'!$A$9:$A$10000,8)),0)+2,11),INDEX('SHEET1'!$A$9:$O$10000,MATCH((RIGHT(C8,8)),(LEFT('SHEET1'!$A$9:$A$10000,8)),0)+2,11))}
I have a column that contains sale # and another column that has cust names.
How could I get the highest 10 sale #s for a specific customer?
Is this a place for index / match?
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies View RelatedWe know how INDEX/MATCH works, and it's very nice. I attached a COUNTIF to it to count how many times the index finds itself on another table; if it doesn't find itself, then it goes blank. However, this time I need to count how many times it finds a certain string condition in the other table.
sampleexcelhelp.xlsx
The columns that need to be filled are shaded in dark pink.
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
INDEX/MATCH multiple ocurence match values needed
View 9 Replies View RelatedIs it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.
View 10 Replies View RelatedI couldn't resolve the formula of Index-Match for getting the values that matches the following criteria
1) Match the "Category" of Table 1 to Table 2
2) Match the "value" of Table 1 to Table 2, if value is not present in Table 2 take the upper closest value.
Once the above conditions are met, Take the Result from Table 2
Table 1 is for Input and Table 2 is for Database.
Please note that Data in Table 2 should not be sorted in any way. I tried to use the -1 option of the Match function for upper closest value but it didn't work out.
Have a look at the file attached : IndexMatchUpperClosestValue_AlongwithExactMatch.xlsx
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies View RelatedI am looking to sum the values found at the intersection of multiple values based upon a vertical and horizontal lookup. The formula I am trying is as follows (which results in #Value):
{=IF(ISBLANK(G$9),"",SUM(IF(INDEX('Journal'!$A$20:$Z$1020,MATCH("Prior",'Journal'!$F$20:$F$1020,0),MATCH(G$9,'Journal'!$H$19:$Z$19,0)),"")))}
I want to extend a formula like so- =Sheet2!M3
=Sheet2!M60
=Sheet2!M117
Basically I want it to go up in increments of 57 when I copy the formula down. Is there an easier way to do this rather than typing it over and over again? I looked on an older post and saw some information about OFFSET and INDEX but couldn't figure out exactly how that worked.
Example:......
On my worksheet 1, I have two dropdown boxes: B7 (that gives the building name) and B11 which gives the Type of Commission (Renewal, Expansion, New). B 20 is supposed to automatically select the percentage based upon what B7 and B11 select. E.g. B7 = House, B11 = Expansion then B20 should be 3.
This is my formula.
=HLOOKUP(B7,'Building Details'!$A$2:$R$24,MATCH(B11,'Building
Details'!$A$2:$R$2,0))
I am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
I am using sheet 1 to pull data from sheet 2 using this formula
=INDEX(Attendance!D:D,MATCH(C2,Attendance!A:A,0)).
This on its own works to pull the data. However the data is repeated for each 'set' of data ie each group of repeating names, as I drag down. I just want the data to appear once on the first lie of each group so I have added an if to the formula
=IF(C2=C1,"No Match",
My complete formula is now
=IF(C2=C1,"No Match",=INDEX(Attendance!D:D,MATCH(C2,Attendance!A:A,0))
On the attached workbook, on the "Progress Summary" page, cell C30 has a formula which should list the names of pupils who made 0 progress (as referenced by the Raw Data page, column R [progress] and column A [name].)
View 3 Replies View RelatedI have never used the aforementioned functions before, but i assume thats what i need to do here....
In the attached table, what formula do i use to return the value '8' i.e. whats in column "Epsilon" and row "Three"
If you could let me have the generic formula i need as well, that would be good.
I can't figure out why the N/As are coming. In G2 I have =INDEX(Area_Codes!$D:$D,MATCH(F2,INDEX(Area_Codes!$B:$B,0),0)). If I replace F2 with 407, I get FL which is right. But why do I get N/A??
View 4 Replies View RelatedL26 returns incorrect information. Input parameters are F29 and F30. In its current state, it returns the value “b”, where I think it should be returning “1”, i.e the intersection point for “3Ph” & “Single-core 70°C thermoplastic non-arm Cu Table 4D1”
View 6 Replies View RelatedIf the value on sheet2 columnA ,matches value sheet1, column AC
then corresponding row value sheet2,column E be put in corresponding row for matched value ,sheet1,column Z.
I have the following array formula that matches against a table with 3 criteria (one specfically is a time), it works ok until the time criteria is not of the value searched for, it may be +/- 30 minutes out, is it possible for the formula to index/match to the actual value or to find the nearest match possible, its in column B.
View 3 Replies View Relatedinsert =IF(ISNA into the following formula? =INDEX(Data!$AE$2:$AE$10,MATCH(1,(Data!$AI$2:$AI$10=$A$11)*(Data!$AD$2:$AD$10=Sheet1!$A$6),0))
View 3 Replies View RelatedI have the following code from my UserForm that works fine for my Summary sheet.
Private Sub TextBox2_AfterUpdate()
Application.ScreenUpdating = False
'//Get the Truck # to act on
Dim varInput As Variant
varInput = TextBox2.Value
'//Exit if no input
If varInput = "" Then
Exit Sub
End If
What I am trying to figure out is to do a Index,Match or what ever it takes to populate the Truck sheet (250+) with info from the user form.
TextBox1 is the date. TextBox2 is the truck number, 3 is the Milage, and 4 is the Cost.
All in relation to the following sheet for the truck: ...
I have the below formula which works fine when I only want it to lookup one sheet but I am now trying to get it to lookup 2 sheets.
I have tried numerous variations but still no luck. Plus I am not sure that with the formula that I am using it is even possible.
HTML =INDEX('2008'!$B$2:$J$1697;MATCH($B6;'2008'!$B$2:$B$1697;0);2)+INDEX('2007'!$B$2:$J$1697;MATCH($B6;'2007'!$B$2:$B$1697;0);2)