I want to use OFFSET in a SUMIF to define the sum range argument...
Essentially this is the OFFSET (simplified) =OFFSET(K108,-50,0,100) (which when I put a SUM around, works.
But, when I put it as the sum_criteria, I get a blank result. =SUMIF(OFFSET(I108,-50,0,100),I108,OFFSET(K108,-50,0,100))
What I want it to do is look at all the cells from 50 above I108 to 50 below I108, and sum the corresponding cells in colum K.
I was wondering if there was a way to use sumif and offset to guide the summing column in the example below. Perhaps I need to add an additional column, then formulate a solution. I want to sum the daily returns for the TSX when the slope is positive (green), and sum the S&P when it is negative. Currently, on signal day, I am summing that day's return, which I don't want to do. I want to sum starting on the next day (blue). The B column switches back and forth from positive to negative, so I will summing different data periods going back 1000 days. I am summing the TSX returns and S&P returns seperately to make it easier. Currently I have in C1=(sumif(b2:b1000,">0",c2:c1000)) Same for D2.
Date
Slope
TSX
S&P
sumif
sumif
06/30/14
0.002774
0.34%
0.19%
[code]....
I think this is simple, but I can't seem to get what I want. I have three columns.
A: months for a few years (rows 3 - 37)
B: data-set 1 that starts in the middle of the timeline to present (rows 20-23)
C: data-set 2 that starts at the beginning of the timeline to present (rows 3-23)
Now, I need to sum for the previous 12 months at the bottom of each column. For column B, I only have 4 data points, so I want to add the 8 data points for the previous 8 months from column C. How do I do this without just doing a couple sum functions -- is there a function that will evaluate the situation on its own?
I am really stuck here and need help with a formula. I have attached a sheet visuals. I want to add up all the numbers that contain two specific accounts#'s. One account is directly across from the number, where I can use this formula very easily: =SUMIF(Q1:Q288,AF245,Z1:Z294)
The second account is in a different column, but it is not directly across the number. It is five cells below. So basically am having a tuff time applying these two conditions, where one condition does not directly align with the data I want to add.
I am trying to sum multiple columns of data by a sumif based on a criteria in column C, the columns are weekly dated, and I wish to match columns by offset this initial column with a start date and end date and sum columns in between, I have been getting close but only returns one columns values?
SUMIF(FilterCol,$C17&I$9,(StartCol:EndCol))
FilterCol is column for criteria match
Start Col is name range - OFFSET(FilterCol,0,'Summary totals line groups'!$G$4,1,1) - End col similar, (G4 is a match date to find column ref)
I want to sum a certain criteria and for the selected months.
Example:
Column A January February March Total
Pen 20 30 40 90
Pencil 10 10 10 30
I want to have total of Pen for the months of Jan and Feb.
I'm using Excel 2003. The sumif function will not allow me to ignore hidden rows in my data set that have been autofiltered. I tried using the following formula and it worked:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(CopiedB!$I$2:$I$65000,ROW(CopiedB!$I$2:$I$65000)-ROW(CopiedB!$I$2),0,1)),--(CopiedB!$A$2:$A$65000=$A22),CopiedB!$I$2:$I$65000)
The problem I am having is that the sumproduct and offset funtions used to ignore hidden rows are considered "volatile" and force a recalculation. Moreover, I have this fomula pasted 100+ times and this dramatically slows things down even when I turn autocalculate off. Is there another way to accomplish a sumif with a user defined custom function in VB? I really need to have the ability to do a sumif that ignores hidden rows and is not dramatically slow.
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View RelatedI need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
I have many kitchens using the same recipes. I need to distill information down until I've got a summary of how much is being made. Uploaded is a condensed version of the point in the process I'm having difficulty with. This workbook will pull information from 8 other workbooks and give me excatly what everyone made on any weekday.
And from there, with the kind help of this forum, I figured out how to do a SUMIF based on the recipe number. And it summed up all instances of 'Recipe X' being used. However, it continues to SUMIF itself all the way down the page... which is good, because of how recipes are chosen for each kitchen. However, I only need to report one instance of each recipe.
In the uploaded example (and I apologize for the colorful sheet, but it helped me double check what I was working on.) ... I only need to report the PURPLE results elsewhere... the first instance of each SUMIF.
I am wanting to use these two formulas in one cell. Is there anyway to do this? If "AD3" is 0 I want this =SUM(X3:AC3) and then if cell "AD3" is greater than 0 I want to basically use this formula
=SUM(AH3,X3:AC3)-AD3.
Is there anyway to merge these two formula's?
I have attached the .xls file.
The basic setup is as follows:
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
I am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria)
Search range is: B1:D400
(for example)
Cell B40 = samuel
C40 = Driver
D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1()
Range("B1:D400").Select
Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
Using Offset
My
Private Sub OptionButton1_Click()
Set primary = Worksheets("Monitor Testing").Cells(20, 4)
For Counter = 1 To 3
If primary.Offset(0, 4)
Any way I could SUM a YTD using VLOOKUP and OFFSET? In another worksheet, I need to reference Account Income #, go to the worksheet shown below, find the Account Income number, Offset and sum of the columns in that row to the YTD figure.
Attached is a sample : EXAMPLE.xlsx
Account
Income
9/30/2012
8/31/2012
7/31/2012
6/30/2012
5/31/2012
[Code] ......
EXAMPLE.xlsx
I'm trying to lookup a string in a column from another sheet and than return the row on which that string was found. I have two files, one in which my OFFSET/MATCH worked and another in which they didn't work properly.
My problem is this: I have multiple instances of a string in a column and i want to get all the info on that string (the rest of the columns). Let me explain in examples.
In column A on Sheet 2 i have
4 2 4
2 3 4
5 3 2
2 2 2
4 1 3
I need to have in Sheet 1:
4 2 4
4 1 3
Where the first 4 (bolded) is the reference value.
In sheet 1 i have a column A2 which is the reference. In column B2 i have
=MATCH(A2;'Sheet 2'!A1:A16051;1) - this worked on a file but returned a bad value on the other (donno why)
In the second file i used =MATCH(A2;'Sheet 2'!A2:A10552;0)+1 which returned the good value.
For the second value (row 4 1 3) i used =IF(OFFSET('Sheet 2'!A1;B2-2;0)=A2;OFFSET(Sheet 2'!A1;B2-2;0);0). This worked well on the first file but didn't work on the second.
I got the commands above from someone that used to update this file so i don't know exactly how they work
I am trying to create a formula to determine if my students made a point in high standers, which means if they got a level 3 and about in 2009 verse the student's 2008. Now if they stayed on the same level did they make learning gains. So what I need to do is look at the grade level of the student (Colum C), then 2009 Math Developmental Score (Colum J), and Finally 2008 Math Developmental Score (Colum M). So if the student scored a level 2 in 2008 and a level 3 in 2009 he gets a point, but if he stayed on the same level. The formula needs to look see if he made learning gains. So if the student is in grade 4 and was a level 3 in 2008 and 2009 he would need to score 163 points higher in order to get a point. I have created a helper table with the information need to calculate the information. I have been working on this for about a week I can’t seem to get it right.
View 3 Replies View RelatedIn row E10:Z10 I have a series of values and in row E6:Z10 I have dates associated with each of the values in row 10.
I would like to create a formula to look in E10:Z10 for the maximum value and then return the date associated with that value. For example, if the maximum value is in P10, I would like the formula to return the date in P6.
I have tried without success to use the OFFSET function as follows:
=OFFSET(MAX(E10:Z10),-4,0)
I trying to out together a small script which performs the following:
-Select cell B7 and offset this by 12 columns and one row
-Resize this by 14 columns, then
-Apply the font format to the selected range from the first to the last row
The code below is what I've put together so far, and although this runs without issue, it's not applying the formatting.
[Code] .......
I'm using the code below to perform the following:
Compare a column of project end dates (column G on the "In Flight Projects" sheet) with the dates in a row of column headers, and Where there is a match, count the number of projects which are being worked within that given month.
[Code] .....
The code works fine, but I'm having a little difficulty in making an amendment to the code:
In the following section of code I need to select the Range ("G8"), but then say if the value in the cell, offset minus 4 has the value of "C&R" then run the rest of the script :
[Code] .....
I've made the following changes, but I'm unable to get this to extract the figure despite not receiving any error message:
[Code] ....
I have a number (>100) of excel workbooks (consistent format) on a server and I am trying to create a master spreadsheet with links to specific cells. I started using formulae based on Concatenate and Indirect functions but always had to use F2 & F9 to get a result. I am now working on a macro to build semi dynamic links, I am some way there but need some expert help please.
In Col A I have the path and file name for all my source files - I have used the Filename *.xls & FoundFiles for this.
In Col B is my specific file name(s) extracted from Col A using an If , Len and Text function.
My macro declares variables; File = Range (“B#”) and Data(21) - an array of 21 specific worksheet cell references
I then select C1 and with active.formula insert the consistent path, File and Data(1).
Then C2 with path name, File and Data(2). Then C3 path name, File and Data(3). & So on for the 21 variables in the array - not elegant but it works okay
I am now at the point where I need to move down the rows and repeat this for each source.
I am wondering (hoping ) there is a simple way of offsetting this for the 100 rows / source files. I would also like to be able to set the offset repeat by counting the number of populated rows in Col A.
The code (from memory so syntax may be a bit wonkey):
I have a rather details and complicated procedure that in effect is designed to find a value (>=) than a text box value inputed.
There are 2 other list boxes (5 & 6) that are also designed to narrow down the search.
The values available in list box 5 are a customers name in column C.
(Sample sheet highlighted value in Yellow)
The values available in list box6 are a product type.
(Sample sheet highlighted in blue)
When i select a value in list box5 and in listbox6, i enter a numerical value into text box111.
I then click on a command button, to populate listbox3 with all found values in column C that are greater than or equal to the value in the text box.
Now comes the part i cannot seem to be able to do.
I need to be able to click on a selected value in list box 3, and find the value that is between 2-22 rows above it in column A and place this value in text box 4.
(List box 3 values are ONLY ever
I have used the Selection x1Down code to select all rows to the next one with data in but now need some code to deselect the final row (I want to delete all of the blank rows above)
View 2 Replies View RelatedI am trying to write two different codes to copy a range of data. Basically I am trying to understand how the OFFSET function works in VBA. The first code listed works fine and is as follows:
View 5 Replies View RelatedI am trying to OFFSET from cell A1 based upon a variable in cell A2. The cell I need to OFFSET to is also located in column A, but it could always differ based upon the variable in A2. Here is the piece of code performing this OFFSET.
View 7 Replies View RelatedI am having trouble with one line of this code that I can't figure out how to write correctly. I have set the range, but I need to offset by 10 rows up. My code fails at set rng.
View 6 Replies View RelatedI'm copying values from one workbook to another. Each value has to be checked, so I do this in two steps.
View 2 Replies View Related