How do I use a variable to name the combo box?
I'm using ComboBox1 through ComboBox15.
In order to populate my combo boxes I always use the same code:
[Code] ......
I know how to change RangeName easily enough, but how do I change ComboBox# to be the value of the combo box I'm populating? I want to run the sub routine instead of putting the code in every time. It really adds up especially with other statements.
I'm looking to change the value of a variable using the selected value of a combobox. I've used the following
Dim DatabaseVal As String
'then on selecting my option from the combo box: "JVU" or "VPU" are the only two options.
DatabaseVal = cmbDbase.Value
When I try and use the variable 'DatabaseVal' to populate a value in another workbook (the workbook contains a reference to the add-in running the above macro), the cell just gets populated with a blank value. I'm sure I'm doing something stupid, but can't see what.
I have 100 combo boxes on an excel sheet, they are divided in three sets (1-25, 26-50, 51-100). Each set has the same value within the set, but is different from the other.
Right now I am able to populate the combo boxes using the following code
Code:
ActiveSheet.ComboBox1.AddItem "Value1"
ActiveSheet.ComboBox1.AddItem "Value2"
ActiveSheet.ComboBox1.AddItem "Value3"
^ This is time consuming and error prone. Is there a way I can use a variable to populate the combo boxes?
I have been able to find the following code, but it does not work.
Code:
Dim ComboBox As ObjectFor ComboBoxCalc1 = 1 To 25
Set ComboBox = ComboBox(ComboBoxCalc1).Select
ActiveSheet.ComboBox(ComboBoxCalc1).AddItem "Value1"
ActiveSheet.ComboBox(ComboBoxCalc1).AddItem "Value2"
ActiveSheet.ComboBox(ComboBoxCalc1).AddItem "Value3"
Next
I have a dropdown box containing text strings. How can I use the selection from a combo box as part of a formula?
So for example I have a spreadsheet that is set up using a search term 'media', I want to select something else from the list e.g 'arts' and I want all of the references to 'media' to turn into 'arts' in the formulas. Kind of like a mass find and replace.
I have a userform with 3 Comboboxes, all of which need to be populated from the dropdown option before OK is pressed. I haven't used any fancy names as this is just a straightforward (or so I thought) entry form ... the UserForm is called UserForm1 and the 3 ComboBoxes are called ComboBox1, ComboBox2 & ComboBox3. I have tried to be economical with my validation routine but I cannot get an incremental variable added to the end of the word "ComboBox" to be recognised ... my code is below :
Private Sub Validate_ComboBoxes()
While MyComboCount < 3
MyComboCount = MyComboCount + 1
MyComboBox = "ComboBox" & MyComboCount
Select Case "UserForm1." & MyComboBox <<<< This fails
Select Case UserForm1.ComboBox1 <<<< This works
Case ""
MyValidCheck = MyValidCheck + 1
Select Case MyComboCount
Case "1"
MsgBox "Enter the number of weeks for this period"
Case "2"
MsgBox "You need to enter a start date"
Case "3"
MsgBox "You need to enter an end date"
End Select
End Select
If MyValidCheck > 0 Then
MyComboCount = 4
End If
Wend
End Sub
i want to use a listbox or combobox on a userform with the values coming from column A in the MAIN sheet. what i need is if the colour i want is not there i type the new colour in it then adds the value to the end of values in coloumn A and too the list for the next time i use the userform. is it possible to do this and how?
View 3 Replies View RelatedAm trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies View Relatedtry and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies View RelatedI have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.
I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.
VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub
I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).
The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.
I attached a xls to this post to explain better.
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies View RelatedI'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
is it possible to perform calculation such as sum,multiply value of 2 combobox and get it shown at 3rd combobox/label at userform initialize stage?
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test()
Dim StartRng As Range
Dim Buffer As Range
Set StartRng = WorkSheets("Sheet1"),Cells(1,1)
StartRng.Activate
ActiveCell. CurrentRegion.Select
Buffer = rngStart.CurrentRegion.Copy
' I also tried the following line of code but that didn't work either
'Set Buffer = rngStart.CurrentRegion.Copy
..
...
End Sub
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies View RelatedOn the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
View 4 Replies View RelatedI'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro.
But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile.
Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile.
The next target file in the folder is opened and the actions are repeated in this second target file.
For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook.
The error message i get is: "Run-time error 91:Object variable or with block variable not set."
When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V
13019090W Part A1
68705500 Part B1
64202900 Part C-11
59634600 Part D1
26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
View 3 Replies View RelatedI Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code:
Sub dataintoonesheet()
Dim i As Integer
Dim jk As Integer
Dim j As Integer
Dim rowstart As Integer
rowstart = 3
[Code] .......
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1, Criteria1:="1"
'SET RANGE
Dim sFormula1 As String
Dim sFormula2 As String
Dim sCell1 As String
Dim sCell2 As String
Dim sSheet1 As String
Dim sSheet2 As String
Dim r As Range
Dim MyRange As Range 'for testing
With Sheets("Points")
sFormula1 = .Range("CY1").Formula
sFormula2 = .Range("CY2").Formula
End With
'FORMULA IN R1C1 STYLE
strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))"
'ENTER FORMULA IN ALL CELL RANGES
r.FormulaR1C1 = strFormula
'REDUCE TO VALUES
Dim ar As Range 'an area is a range
For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells
ar.Value = ar.Value
Next ar
'UNLIST
Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select
Selection.AutoFilter Field:=1
End Sub
I need my program to:
- find the cell containing the string "Datum/Tid"
- record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range
Dim lRow As Long
Dim lCol As Long
'Find method of VBA
Set rFoundCell = Range("A1")
Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _
LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _
SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
lRow = rFoundCell.Row
lCol = rFoundCell.Column
End Sub
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String
Dim stopDate As String
Dim startRow As Integer
Dim stopRow As Integer
startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)")
If startDate = "" Then End
stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)")
If stopDate = "" Then End
startDate = Format(startDate, "dd/mm/yyyy")
stopDate = Format(stopDate, "dd/mm/yyyy")
startRow = Worksheets("sheet1").Columns("A").Find(startDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _
LookIn:=xlValues, lookat:=xlWhole).Row
Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
End Sub
I have two questions.
1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.
How do I get these values to a ComboBox.
2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1
So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.
Note: This ComboBox is on the UserForm and not on the Excel Sheet.
I am getting error in Set MyRange
[Code] .....