Place The Sheet Tab Name In My Spreadsheet By Formula
Sep 6, 2005"DRHannay" wrote:
> how do I place the sheet tab name in my spreadsheet by formula?
>
> Excel 2003
Try:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
"DRHannay" wrote:
> how do I place the sheet tab name in my spreadsheet by formula?
>
> Excel 2003
Try:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
Excel 2007 I have 80 very similar sheets. The only difference is the sheet name (Phase A (1), Phase A (2) etc.). I want the formula located in cell B5 to be different on every sheet.
I have listed the desired formulas on a single seperate worksheet, named "Overview". On this sheet, the following columns have these data in them:
A - Sheetname (example: Phase A (1), Phase A (2) etc.)
B - Cell location (example B5, constant)
C - A formula (example: =Sheet1!G47, =Sheet1!G48, etc.)
I would like to create a macro that will loop through all the sheets, doing the following:
1. Check if the sheetname exists in column A of the Overview sheet
2. If it does, take the formula from column C of the Overview sheet
3. And put it in the cell specified in column B of the Overview sheet
Here is some code, to illustrate the above. I know the code is mostly nonsensical.
Code:
Sub Enter_formulas()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
[Code]....
How can i get this code to run through each sheet and place the value of the sum on its respective sheet in the same positon .....
Sub maths()
lr = Cells(Rows.Count, "E").End(xlUp).Row
Range("E" & lr + 1).Select
ActiveCell.Formula = Application.WorksheetFunction.Sum(Range("E2:E" & lr))
Selection.NumberFormat = "[h]:mm:ss"
End Sub
How do I do this?
View 3 Replies View RelatedI need to copy the sheet being worked on, and place it behind the original sheet.
This is going to be in a Macro enabled template that other users will be rename when they save it.
It will be activated by a button on the original worksheet other users may need to rename the worksheet before copying so I am using ActiveSheet.Copy I don't want to put the sheet after a counted sheet, because other sheets may be inserted before the one being worked on. I am not proficient at VB, I basically search for a macro that does what I need and copy it.
This is what I am working on.
Sub CopySSR()
'
' CopySSR Macro
'
'
ActiveSheet.Copy After:=Sheets(7)
End Sub
I have is 3 seperate jobs listed, what i want to do is have each one of these rows copy over to a different sheet, and place the next available row. What I would like to drive this is the number in column "n", for example, "n3" is 1, so I would like that row to copy to the sheet named "1", and entered in the next available row under any previous lines that have been copied over.
******** ******************** ************************************************************************>Microsoft Excel - BETA SCHEDULE.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCDEFGHIJKLMNOP1Date EnteredTime Ent'dCUSTOMERJOB #LINE #MATERIALMATERIALMAT'L QTYPAPERPAPER QTYFinish QNTYSIZEMach.RUN DATEDue Date233/318:58 AMCUST. A2585271HSS5260 15 SH 15 / 1530X65 .02013/313/3143/318:58 AMCUST. B2585241PC 8256 7 FT 3 / 624X26 .01023/313/3153/318:58 AMCUST. C2585161TFS1010 3178 FT 615 / 61532X61.5 .00833/314/1MASTER [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Workbook 1 has 2 spreadsheets. Spreadsheet 1 contains Item and Pass/Fail Columns. under the item column is the serial number of the item tested. the Pass/fail column has the serial number duplicated if it failed tested. what is the formula is to have spreadsheet 2 pick the items from the pass/fail column on spreadsheet 1?
View 4 Replies View RelatedI have 2 sheets in my excel spreadsheet. One tracks data for a number of projects five different employees are working on. The other sheet is where I want to total up the number of minutes each employee has worked on their individual projects. I tried writing an IF statement like below but I am only getting the total in the first field even if the employee's name is not Employee 1....
[Code] .....
How I can write this so their totals show up in the correct row?
I am after a macro to do the following, my visual basic skills are very limited (non existant):- Look at the date in cell A1 on Sheet 'Live Report' and err 'remember it' Copy a range of cells from A3 to A10 on 'Live Report' Go to sheet 'Monthly Summary' and find the date that had been remembered previously (this date will be in column A on 'Monthly Summary' which will probably be a mixture of values and formulas). After the date has been found paste special and transpose the 'values only' copied range from 'Live Report' (A3 to A10) in column B on 'Monthly Summary' next to the date that has been found in Column A.
View 2 Replies View RelatedI have attached a document paralleling a document I am working on. The dollar amount in each spreadsheet represent sales. I have entered in values into the candy, soda, and chips spreadsheet. I have also linked values for candy into the total spreadsheet. My question is can I somehow type something or drag the formula down to populate the other cells in the total spreadsheet?
The idea I am thinking but which I don't know how to implement is to list all the items (as in column G) and list all of the relevant cells (e.g. B1 in the Candy spreadsheet) as in columns H and I (Note that all items will have the same cells but the cells will have different values...e.g. all three items have a cell B1 and B2 in their spreadsheet but these cells contain different values). I then try and fail to create a formula in cell B3 of the Total spreadsheet. I am trying to create a formula of the following nature:
='(Spreadsheet Name From Column G)'!(Cell Name From Columns H and I)
The Second half of the formula doesn't really concern me (i.e. the cell name from column H and I). However I am perplexed as to how to achieve the goal in the first parentheses above.
how put picture into cell as background. it means, after it's done, if i click on cell, i must be able write into cell like before change. i dont want solution through comments or shapes because picture will be on top of cell. and not as background
View 7 Replies View RelatedI am trying to place the contents of an array into a column on the sheet. I can enter the array into 1 cell (which strings the values), but I can't seem to make range(1)=array(1).
View 9 Replies View RelatedFound several items close to this, but not exactly (at least that I could find). It's difficult to type what I need to do, but here it goes.
I have two sheets. Sheet1 has data that I want to look at in range A1:B7; Sheet2 has column titles waiting on data from Sheet1. If one of the column titles on Sheet2 is "Mike," I need to look for all "Mikes" from A1:B7 and pull the data automatically onto the other sheet. I apologize if confusing, but I tried as best I could to describe it. I have attached a small file for guidance. Using the attached file, take "Mike" for example. Under his name on Sheet 2, cell A2 would display 300, then cell A3 would display 1,000.
I have come up the code below. It imports contact information from Outlook contacts in a contact folder called Private Contacts. The below code has been copied and modified from this forum.
As it stands the macro creates a new workbook and places the data on that. What I need it to do is create a new worksheet with the name of private compare on the active workbook and then place the data on that worksheet.
[Code] .....
using code to take raw data from one workbook <book1> tab <Phase1RawData> and pasting to summary workbook <book2> onto <SummarySheet>. New data is available with each Phase (14 in all) and will eventually fill all cells as indicated in the Summary Sheet Page. However raw data has in any one Phase only the columns up to the Phase its currently at. So Phase 1 will only have Phase 1 column, Phase two will have columns for Phase 1 and 2, Phase 3 will have 1,2,3 and so on (the example Book1 has two example sheets for phase 1 and phase 2 data - so each phase has a column added with the previous columns remaining.)
The problem is in having the summary sheet always show all 14 phases colmns (as in the example attached) irrespective of which Phase is being updated. So if up to Phase 3, insert the raw data available will be colmns for Phase 1, 2 and 3 - but I need ensure after that has been updated only the remaining Phase colums to 14 show. That is, if Phase 1, 2 or 3 etc are now in place, insert the remaining blank Phase columns to, and including Phase 14. Need to do this at end of each phase until 14 is met. The data up to column S is all from the raw data original sheet - Items from Column T I insert independantly as the data is transferred.
I have a form with a number of fields that once submitted paste the data in the next blank row in a sheet (as below). A user will input the date of the week commencing in a text box on the form (Calendar1) and a number of days in another box (txtSupp). I need it to submit the value of "txtSupp" in the same row on the sheet under the right date of the week commencing based on date in "Calendar1". Rows L1 to EJ1 of the sheet have the date of the week commencing starting from 02/04/2012. E.g. L1 = 02/04/2012, M1 = 09/04/2012 etc.
Private Sub SubmitForm_Click()
ActiveWorkbook.Sheets("Data").Activate
Range("A1").Select
[Code].....
I am working on a workbook in which I extract data from a SQL database into a sheet with more or less the following format:
ID_Company
ID_Level
ID_XX
[Code].....
The aim is to extract a list of any employee that has been tagged as "NEW" in the last column, with his/her detail as per the column headings - and place the resulting list in another sheet. The extract is done dynamically and varies from month to month. So in other words the column headings 2013.MAY and 2013.JUN will change next month to 2013.JUN and 2013.JUL respectively - and so would the detail of the data below them as well. The "NEW" tag is simply assigned through an IF statement.
I had a look at most of the Excel Magic trick video clips on YouTube and managed to get a data extract from my main data sheet - BUT was only able to do the extract on the SAME sheet and NOT onto another sheet in the same workbook.
Spreadsheet 1: So in column "A" I have all of the dates written out. Then i need column "B" to put the appropriate name next to the date that person chose in spreadsheet 1.
Spreadsheet 2: I have a live form that feeds data into a different spreadsheet.
I am using google spreadsheets.... The formulas are the same as in excel
Let`s assume that I have numerous "Serial Number" in "Sheet1" : http://i40.tinypic.com/2iqbspt.jpg
Now I want to create some cards in "Sheet2" that each card have a serial number that related serial number there is in "Sheet1" : http://i43.tinypic.com/34fz690.jpg. Need easy solution for doing it while when I drag one card to copying it then related serial number in sheet1 would be appear in required field. I mean first card has first serial number of sheet1 and second card has second serial number of sheet 1 ; but I want to doing it quickly with dragging.
I have a spreadsheet of which i need to count instances on 2 COLS and place in a graph.
Example
D...................................... Col E
JO BLOGGS....................... ERROR
JO BLOGGS....................... ERROR
JO BLOGGS....................... SPOIL
JO BLOGGS....................... SPOIL
JANE DOE........................ ERROR
JANE DOE........................ SPOIL
I need it to count the errors Jo bloggs had so i can populate the chart, the chart would be no problem once i can separate the data as described. I would then have to do the same with Jane Doe.
I am testing the code below...
Sub applyCombination()
Dim shtP As Worksheet
Dim j, k As Integer 'j = row; k = col
On Error GoTo errorhandler
Set shtP = Sheets("Sys-Year")........
k = k + 1
Next k
j = j + 2
Next j
Exit Sub
errorhandler:
Exit Sub
End Sub
and, as it is a bit slow to paste a formula in each cell, I was wandering:
Is there any way I can place the resulting value ONLY?
(I don't want to do copy and paste special just values as it takes even more time)
Upon user making selection from data validation list in Active Row Selection & Column A : i would like to do the following (is possible)
,,,,,,,,,,,,,,,
Place formula in Active Cell Row & Column S
=MT4|BID! (followed by cell A1 but replace the "/" with "") followed by "m"
I have tried several combinations but with no success.
Also - where would i place this code so that it automatically updates the formula in Column S as soon as the user changes selection in Cell A?
When you enable macros the sheets 2, 3, 4 ect are visible but if you disable macros, you only see sheet 1 and and you can place a message on the sheet saying this will only work with macros enabled.
View 2 Replies View RelatedI'm creating a Speech and Debate calculater that presents winners names by place according to their score. If you look at Tab HSSE Results it will read the inputed information from HS Speech English. I want the names of the students to appear in the correct ranking order in the respected grade rankings chart. I currently have a countif formula which reads the grade, but I think I need to link that with an index formula which I'm having problems with.
View 8 Replies View RelatedI have a list of Items and the quantities of those items on one sheet. Each item has a section location number as well. (three Columns, Item, Quantity, and Section Location). the list can repeat the same item multiple times.
This is why I then have a summary sheet to uses a SUMIF formula to sum the quantities of a given item that are in a givin section. which my SUMIF Formula works great for. But my problem is some items have the word "LUMP" as its quantity and not a number. I want to add to my array formula so if the item does have a LUMP quantity and the lump quantity is in the section location to put LUMP on the summary sheet. here is my formula
=SUM(IF((ProjectInfo!$AE$2:$AE$307 =$B59)*(ProjectInfo!$AD$2:$AD$307= AA$10),ProjectInfo!$AF$2:$AF$307,""))
projectInfo is the sheet where the list is. Column AE is the Item column on the projectinfo sheet column B on the summary sheet would be the item that i want to sum the quantities for Column AD is the section location column on the projectinfo sheet the AA$10 is the row and column of the section location i want to limit the sum of the quantities to the formula is in cell AA59 So it will sum all the quantities in the list on the projectinfo sheet if the item and section location match whats specified on the summary sheet.
getting LUMP to display if its a lump quantity. The Lump can only show up if the item on the projectinfo sheet has LUMP for that Item AND in that section location.
EDIT: Column AF on the ProjectInfo Sheet is the quantity column
Column P is the percentage of body weight lost...
P
-1.98%
-2.92%
-3.87%
-3.48%
0.00%
-0.10%
0.00%
-3.56%
-3.57%
What I need is a formula to look at all 9 data points and give the place number. Remember that the lowest number is actually in first place.
I have a macro that imputs data from an external database and puts it into a temporary worksheet. This data has 3 columns (ID, Date, Amount). I am then making another sheet which has X number of tables (one for each ID), with the years being the column headings, and months being the row headings. ie.
| ID X
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
| ID Y
| +------+------+------+--->
| | 1999 | 2000 | 2001 |
+------+------+------+------+--->
| Jan | $100 | $250 | $300 |
+------+------+------+------+--->
| Feb | $200 | $300 | $200 |
+------+------+------+------+--->
| Mar | $300 | $250 | $100 |
+------+------+------+------+--->
| Sum | $600 | $800 | $600 |
| +------+------+------+--->
Currently I have a few hidden fields for the DSUM Criteria. I start making the tables. And then filling in table based off of the month and year. Doing so I need 3 criteria:
>= First Day of the Month
<= Last Day of the Month
= ID #
The problem is it takes Excel too long to fill in the 3 criteria fields, calculate the result, copy the result, and place it into the correct place on the table. Is there another way to get this data into the correct tables faster? Instead of using DSUM?
I have a RAW DATA work sheet that has data of electricity consumption for a given week but it is in a vrtical table.
I have many other work work sheets in the workbook that I require to look at the RAW data and the return the correct information in the specified cells
I need the store number that is in cell F1 of each sheet and the Date on each sheet that are on Row4 of each sheet to Look up and match the information in ROW1 for the store number and columnA for the dates.
then in columnB of RAW DATA I have time intervals of 30mins which need to match up with the time intervals on the sheets and display the readings from the RAW data on the sheets.
******** ******************** src="http://www.interq.or.jp/sun/puremis/...<CENTER><TABLE cellSpacing=0 cellPadding=0 align=center>Microsoft Excel - Energy Analysis WE15-03-09.xls___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA2A3A4A5A6A7A8=ABCDEFGHIJKLMNO1Reading DateReading Time8912116617118519682296710191119125612571292209/03/200900:0012.5926.74929.69668.728.6487.526.5616.2312.6416.3818.08317.02719.569309/03/200900:3011.8467.211.49610.1245.8726.821.817.9811.3216.711.96214.65619.243409/03/200901:0010.7368.11211.19811.286.27.415.2330.3412.0416.269.5527.26429.02509/03/200901:3010.78767.612810.68510.40725.6966.814.888.936.8416.618.53448.72645.4432609/03/200902:0011.0727.235213.01310.3235.9288.814.757.875.9218.059.38247.09445.3136709/03/200902:3011.2996.819210.26210.1765.70410.414.758.135.0916.489.0566.88325.1984809/03/200903:0011.8116.18248.952411.3695.88.314.697.774.9916.87.20964.71046.2496RAW DATA [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
View 2 Replies View Related