Create New Tabs From Values In A Cell
Feb 10, 2014I have a large spreadsheet and want to sort by Column "L" and copy all the rows where Column L has the same value into a new tab named with the value in Column L.
View 2 Replies
ADVERTISEMENT
Create Documents Based On Cell Values And Input Tabs In New Document
Sep 12, 2013I want to create a macro that creates a new .xlsx document based on cell values. And input 4 tabs into each document with specified tab names. I have a document that pulls from external sources and fluctuates with amount of data per day. I envision something that will make a new document named for the contents in cell A1, then function as a control+down to create a new document for A2, then A3 until there is no content left (should mention these are lookup formulas, and if there is no data it pulls a value of "0")
Is there a way to put in the code, the tab names it would create in each new document, or would that have to look to a cell value for the naming? The tab names would be "GS", "MYSS", "COLL SHEET", and "WIRE".
Use The Names Of The Tabs In The Summary Page And Create It Into A Formula To Lookup Fixed Cells Within The Various Tabs
Oct 12, 2009I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies View RelatedCreate Tabs Within A Tab?
Feb 28, 2013Is it possible to create tabs within a tab? If so how?
View 1 Replies View RelatedVBA Macro To Create And Name Tabs?
Jun 9, 2014I had in my macro toolbox a macro where in column A I listed names for worksheet the macro would then create and name the worksheets from the list in Column. But unfortunately our share drive where I kept the toolbox crashed and all the data was lost.
View 1 Replies View RelatedCreate New Tabs From A List
Jun 16, 2014I have a list of pairs of 406 pairs of currencies like the list below and I need to create a tab for each one of them and will take ages to do it manually, I am looking for a macro that can do it.
AUDCAD-AUDCHF
AUDCAD-AUDJPY
AUDCAD-AUDNZD
AUDCAD-AUDUSD
AUDCAD-CADCHF
AUDCAD-CADJPY
AUDCAD-CHFJPY
AUDCAD-EURAUD
AUDCAD-EURCAD
AUDCAD-EURCHF
AUDCAD-EURGBP
AUDCAD-EURJPY
AUDCAD-EURNZD
I have tried to use the one in other thread but I am not that good in editing the code:
Sub addsheet() Dim newsheet Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet) newsheet.Name = "ww16" End Sub
Auto Create New Tabs
Jul 17, 2008I have a column with multiple currencies. Is there a way to write a formula or some code that will look to that column, and create a new Tab for each new currency name it finds, and then name the Tab that currency?
For example, C5:C15 has an assortment of entries either USD, GBP, AUD. I'd like a search that looks to C5 and creates a new tab labeled whatever the first currency is, then move down the column and do the same thing every time it encounters a new currency, but pass over a cell if it's a currency that already has a tab made for it.
Create 3 New Tabs, Name Them, And Use Template
Aug 25, 2008Well I am here at this fork in the road again.
I need to create 3 new tabs... 10,4, and 1
I have tried this and it creates the worksheet, but does not copy the "sheet1" as its format.
I need to do this 3 times.
For i = 1 To 1
Set ws = Worksheets.Add
ws.Name = "10"
Worksheets("Sheet1").UsedRange.Copy wsnew.Range("a1")
Next i
Create New Tabs For Every Different Field Value Within A Column
Jun 2, 2014I'm trying to reduce some manual labor that I do each month by figuring out a way to create additional tabs for every different "branch" within a given column from a master table. The branch numbers may not necessarily be the same each month as some old may go and some new ones may come.
I have attached two excel workbooks. One shows the master "Data Table" and the other shows what I want it to look like "After Sorting". As you can see, I have to create a separate tab for each of the branches listed in column A on the master table. This becomes really cumbersome, especially when we really have about 20 branches but I'm only using these 6 for the example.
Data Table.xlsxAfter Sorting.xlsx
VBA Code To Create New Tabs In A Worksheet?
Sep 5, 2013I don't know VBA code but i am familiar enough to know that a code can be written to separate out information into different tabs on a worksheet.
For example, I have a standard worksheet with say 20 columns going across and 20,000 rows going down. At each "name" change in row 1, I would like a macro to copy into a new tab. Basically the end result will have a tab for each name and the corresponding columns that go with the name.
How To Create Worksheet Within A Macro With 10 Tabs
Feb 6, 2014I need to create a Worksheet within a macro that has 10 tabs. I had something running, then I made some changes and I got Application-defined or object defined error.
Sheets("Sheet1").Name=Sheetname(1)
Sheets.Add after:=Sheets(Sheets.Count)
I was looping thru this up to 10 now its not working. This isn't too complicated,
Create Multible Tabs From Names In Column
Jun 4, 2009i got a workbook made by one of the members in which on clicking of a button (make sheet)---->tabs of all the data in column A is made in that sheet. but if i want to copy a specific data that is present on main sheet to all the sheets created on click of button.
View 4 Replies View RelatedCreate Formula Using 2 Different Tabs Within Excel Workbook
Apr 24, 2014I need to create a formula using 2 different tabs within an excel workbook. I need to search column A on the first tab and column A on the second tab and if they match I need to compare column F on the first tab to column F on the second tab. (This column contains my staff names but the problem I am running into is on the first tab their names are listed first name last name and on the second tab they are listed last name, first name). If column A and F match I need to search column H on the first tab to column H on the second tab. If all columns match up to this point I need to take the data in column Q on the second tab and in put it into column K on the first tab. Is this even possible?
View 2 Replies View RelatedCreate Drop Down List For Worksheet Tabs
Mar 19, 2007I have seen it accomplished where all worksheet tabs are arranged in a drop down list, and was wondering how to make that happen.
View 6 Replies View RelatedMerge 2 Tabs Into 1 Spreadsheet To Create Pivot Table?
Jul 9, 2014I would like to combine 2 tabs into one spreadsheet. I was not able to do so, because it exceeds the max rows allowed in excel. I have installed powerpivots but not sure how to combine data using powerpivots.
View 3 Replies View RelatedHow To Create IF / AND Formula Draws Data From Multiple Tabs
May 21, 2014Is it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
Macro To Create Multiple Tabs With Same Spreadsheet On And Date Them
Jul 20, 2014I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 Replies View RelatedMacro To Create New Tabs Based On A Contract Number
Apr 11, 2008I work with contracts and have to report the sales for each contract by customer number, name, address, product code or sku, sales amount, quantity, and invoice date. Each contract number is associated with a product group and within that product group are a laundry list of product codes or skus.
Customers are often on different contracts for different products and may purchase some or all of the products on that contract. When I run a query from the system to extract this data, I get one sheet that contains 20,000 lines that have to then be sorted and seperated into different tabs based on the contract number. Keep in mind that a customer may be listed multiple times because each line in the query represents a product code and an invoice date.
I currently have a macro that will format the reporting such that it sorts the data, however, what it doesnt do is look for each instance of a particular contract number and separate it into different tabs.
So below are two examples: April and May 2008 Reports
April 2008 Report
Contract 1 contains 5,000 lines of data - extract into new tab
Contract 2 contains 5,000 lines of data - extract into new tab
Contract 3 contains 5,000 lines of data - extract into new tab
Contract 4 contains 5,000 lines of data - extract into new tab
Total lines = 20,000
May 2008 Report
Contract 1 contains 7,500 lines of data - extract into new tab
Contract 2 contains 5,500 lines of data - extract into new tab
Contract 3 contains 8,000 lines of data - extract into new tab
Contract 4 contains 9,000 lines of data - extract into new tab
Total lines = 30,000
So for the April Example, I would like excel to take this one list and break into 4 new tabs based on the contract number and carry over all of the data into that tab.
Where this may become difficult is that there may be more lines of data one month and fewer another. Im not sure if there is a function that will tell excel to stop when it reaches the last line for one contract number and to start a new tab for the next contract number. (see the month of May example)
Create Sub Directories From Cell Values
Oct 7, 2007Create sub directories from Cell Values
I Need a VB macro to Create sub directories unless sub directory already exist. My file will be Save 5 Level deep. Each Sub Directory will be cell value in a Worksheet .
Example C:CategoryYearSeriesMonthBimonthlyFile Name.xls
I will be using this in over 100 different files so I want to be Generic as possible
Code To Create Directories From Cell Values
Feb 26, 2009I have a CSV file and would like to create directories on my hard drive and the names of those directories will need to be pulled out from this csv file: [B1:B86].
For example I have the following data in my csv file:
B1: folder1
B2: folder2
.
.
.
And would like to create folders on my hard drive so that folder names will be: folder1, folder2, ...
Excel 2013 :: Create New Values Based On Number In One Cell?
Jul 21, 2014I have the following data set with about 500 rows. It has one large value in column A, followed by a number between 1 and 24 in column B.
I am trying in Excel 2013 to develop a formula that will: divide A by the value in cell BPlace in cell C, D, E, F... the result of this division, where the number of times the value is repeated depends on the value in B. E.g.
Example of source values/data set:
A
B
18504
18
2011
2
23694
24
(about 500 rows more)
An example of the output result that I am looking for:
A
B
C
D
E
2011
2
1,005.5
1,005.5
In above example, the value in column B is 2, so the result of the division of value A with value B is repeated twice. In case value B would be 18, the value would be repeated 18 times...
I have been trying to do this in Excel for more than 2 hours, but I did not manage to complete it.
Can Automatically Create Named Ranges Based On Adjacent Cell Values?
Jul 11, 2013Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
Add Values Across Multiple Tabs
Feb 26, 2013I trying to use the formula below to add values across multiple tabs but I am getting a value error. I think it is just a small punctuation thing.
=SUM(INDIRECT("'"&REF!$A$2:$A$3&"'!&$F$62"))
REF is the name of my references tab and has a list of the tab names
How Can I Do A Chart That Spans Values In Different Tabs?
Sep 9, 2009I need to create a chart that will show month over month sales for different channels. But each month total is in a separated tab in the same file.
Example:
August totals
Channel Sales
Channel 1 $1000
Channel 2 $2000
Channel 3 $500
I need a chart that will show sales for Channel 1 ,2 and 3 from jan to aug.
Retrieving And Listing Values From Series Of Tabs
Jul 31, 2012I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.
View 1 Replies View RelatedMacro To Transform Formulas Into Values Across Multiple Tabs
Feb 7, 2014I have never written a macro and when I record one I usually have trouble with the relative references.
I am trying to write a macro to transform formulas into values every month.
I want to transform formulas:
- across a range of tabs: each tab is exactly alike and is named page-1 to page 25
- on a different column every month (same column across all tabs)
- on the same rows: L168 to L227 and L266 to L277 (same rows across all tabs)
Create Multiple Sheet Tabs From Multiple Cells
Jun 22, 2006Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
Excel 2007 :: Change Colour Of Tabs To Match Other Tabs In Workbook
Sep 22, 2012I have been trying to get Excel (2007) to change the colour of tabs to match other tabs in the workbook
Using this code I get the colour code of the current tab
Code:
x = ActiveSheet.Tab.ColorIndex
But when I use this value in a procedure like this:
Code:
ActiveSheet.Tab.ColorIndex = x
The tab is a different colour!
How To Add 3 Horizontal Monthly Values And Create Quarterly Values
Oct 24, 2013I have a data series running horizontally, which gives me monthly values e.g.
Jan 10 - Feb 12 - Mar 11 etc. Imagine the months are in row 2 beginning from column 2, and the values are in column 3.
I would like a formula which adds the three values, and in row 6 column two gives me the total for the quarter (10 + 12 + 11) and displays 33.
The next quarter value, I would like in row 6 column 3, etc.
Copy Cell Contents Between Tabs Provided Cell References Match (VLOOKUP)
Apr 29, 2014I have 2 inventory reports: what my store has and what my supplier has. I need to copy Tab1:K# to Tab2:T# provided that Tab1:A#'s contents match Tab2:A#'s contents. The A column represents the SKU of the item, but there is a difference in the amount of SKU's in each (my store sells ~6,000 items, supplier has ~10,000 items), so it's not as simple as sort by column A and copy pasting column K to column T.
For instance:
On Tab 1, A2's value is [1], K2's value is [9.38].
On Tab 2, A70's value is [1], K70's value is blank, but I need it to be [9.38], to match Tab 1's respective SKU.
I almost thought I had it figured out with VLOOKUP, but I cant seem to get it right... It doesn't reference the correct number.
Screenshots for reference
First tab, from the wholesaler: [URL]
Second tab, store's stock: [URL]