Create Documents Based On Cell Values And Input Tabs In New Document

Sep 12, 2013

I want to create a macro that creates a new .xlsx document based on cell values. And input 4 tabs into each document with specified tab names. I have a document that pulls from external sources and fluctuates with amount of data per day. I envision something that will make a new document named for the contents in cell A1, then function as a control+down to create a new document for A2, then A3 until there is no content left (should mention these are lookup formulas, and if there is no data it pulls a value of "0")

Is there a way to put in the code, the tab names it would create in each new document, or would that have to look to a cell value for the naming? The tab names would be "GS", "MYSS", "COLL SHEET", and "WIRE".

View 1 Replies


ADVERTISEMENT

Create New Tabs From Values In A Cell

Feb 10, 2014

I have a large spreadsheet and want to sort by Column "L" and copy all the rows where Column L has the same value into a new tab named with the value in Column L.

View 2 Replies View Related

Order Columns & Tabs Based On User Input

Jan 9, 2009

How would I reorder columns & tabs based on a form where the user can put them into order that they would like the columns? I forsee some type of form where the user can dsignate the order and then start a macro that will sort both the columns and tabs.

View 5 Replies View Related

Input Box To Create And Input Info Into A Formula Which Then Populates A Cell With A Value

Jul 24, 2014

I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:

Input Box Msg 1 - "What is your labor cost?" (NUM1)
Input Box Msg 2 - "What is your productivity rate?" (NUM2)

Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:

=(NUM1*(NUM2*$H10))/$H10

So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.

View 9 Replies View Related

Conditional Input In A Cell Based On Data In Two Different Cells And Other Values

Dec 4, 2009

I have lot of data in three columns like this. The first column is "Name", the second is "Comment" wherein I want the macro to write some comment, the third one is DOB. The problem is that the names in column 1 repeats many times. I want a macro to write in column B "either Old or Older or Oldest" based on the Name and DOB. Thus David with DOB 13 Sep 1982 be marked Oldest in Column B and David with DOB 25 Aug 1988 be marked Older and David with DOB 24 May 1990 be marked Old. Similarly William and Rita should be marked either old or older or oldest. As the data are enormous I do not want to refer the actual name in the programming. I want to call them using a variable in programming.

NameComment DOB
David 25 August 1988
David 13 September 1982
David 24 May 1990
William 24 March 1980
William 25 July 1987
William 13 August 1989
Rita 17 July 1990
Rita 24 April 1989
Rita 13 June 1988
The example file is attached

View 14 Replies View Related

Cell Values Based On Input Of Another Cell And Sheet

Apr 2, 2007

I want to tie the values of some cells on Sheet 2 to what's put in into corresponding cells on Sheet 1. Example

If Cell B3 on Sheet 1 has the string "B off" put in, Sheet 2 should automatically get "R1" in cell B12, "B off" in cell C12 and "ID123456" in cell D12. If cell B3 on Sheet 1 is empty, B12:D12 should be blank.

View 4 Replies View Related

Macro To Create New Tabs Based On A Contract Number

Apr 11, 2008

I work with contracts and have to report the sales for each contract by customer number, name, address, product code or sku, sales amount, quantity, and invoice date. Each contract number is associated with a product group and within that product group are a laundry list of product codes or skus.

Customers are often on different contracts for different products and may purchase some or all of the products on that contract. When I run a query from the system to extract this data, I get one sheet that contains 20,000 lines that have to then be sorted and seperated into different tabs based on the contract number. Keep in mind that a customer may be listed multiple times because each line in the query represents a product code and an invoice date.

I currently have a macro that will format the reporting such that it sorts the data, however, what it doesnt do is look for each instance of a particular contract number and separate it into different tabs.

So below are two examples: April and May 2008 Reports

April 2008 Report
Contract 1 contains 5,000 lines of data - extract into new tab
Contract 2 contains 5,000 lines of data - extract into new tab
Contract 3 contains 5,000 lines of data - extract into new tab
Contract 4 contains 5,000 lines of data - extract into new tab
Total lines = 20,000

May 2008 Report
Contract 1 contains 7,500 lines of data - extract into new tab
Contract 2 contains 5,500 lines of data - extract into new tab
Contract 3 contains 8,000 lines of data - extract into new tab
Contract 4 contains 9,000 lines of data - extract into new tab
Total lines = 30,000

So for the April Example, I would like excel to take this one list and break into 4 new tabs based on the contract number and carry over all of the data into that tab.

Where this may become difficult is that there may be more lines of data one month and fewer another. Im not sure if there is a function that will tell excel to stop when it reaches the last line for one contract number and to start a new tab for the next contract number. (see the month of May example)

View 9 Replies View Related

View Different Tabs In Same Document At Same Time?

Mar 25, 2012

Is it possible to view different tabs in the same document at the same time?

View 4 Replies View Related

Use The Names Of The Tabs In The Summary Page And Create It Into A Formula To Lookup Fixed Cells Within The Various Tabs

Oct 12, 2009

I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.

View 3 Replies View Related

Excel 2013 :: Create New Values Based On Number In One Cell?

Jul 21, 2014

I have the following data set with about 500 rows. It has one large value in column A, followed by a number between 1 and 24 in column B.

I am trying in Excel 2013 to develop a formula that will: divide A by the value in cell BPlace in cell C, D, E, F... the result of this division, where the number of times the value is repeated depends on the value in B. E.g.

Example of source values/data set:
A
B

18504
18

2011
2

23694
24

(about 500 rows more)

An example of the output result that I am looking for:
A
B
C
D
E

2011
2
1,005.5
1,005.5

In above example, the value in column B is 2, so the result of the division of value A with value B is repeated twice. In case value B would be 18, the value would be repeated 18 times...

I have been trying to do this in Excel for more than 2 hours, but I did not manage to complete it.

View 2 Replies View Related

Taking Data From Document To Rename Tabs

Apr 21, 2013

There is a folder in a shared location which many people use at work. Within this folder, I have an excel document with all current stock (called "Current Stock"). There will never be more than 20 items in current stock. There is also other documents within this folder which relate to lots of other things, Interest, Deals etc.

What I want to do is every time a new item is added to the "Current Stock" document, a tab is created with that Item name within all the other documents.

View 1 Replies View Related

Can Automatically Create Named Ranges Based On Adjacent Cell Values?

Jul 11, 2013

Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.

For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.

I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.

View 9 Replies View Related

Create Formula That Links To Another Sheet Based On User Input

Jan 8, 2009

I'm trying to create a formula similar to this:

=Calculations!(Indirect("N"&A2)-Indirect("AB"&A2)+Indirect("AA"&A2)

The idea is that the user will enter a value in cell A2. That number will determine the appropriate rows in the formula above.

View 6 Replies View Related

Macro To Print Document Based On Cell Data

Dec 15, 2008

got a great bit of code the other day from this forum to automatically print 'x' amount of copies based on the value in cell (see below)

View 2 Replies View Related

Create A Cell That Allows The User To Input A Number

Jul 30, 2009

I am working on a spreadsheet and would like to create a cell that allows the user to input a number (1 to 5) which will then equate to a percentage(%). I would then like this to deduct that percentage from a total number...

To try and explain this.. Should the user input 1 into the cell, this would then equate to 3% - this would then deduct from a total that percentage. Input 2 = 5% etc..

View 12 Replies View Related

Filter Values Based On Master And Input List

Apr 11, 2013

I am trying to copy a spreadsheet i made in google docs in excel keeping the same functionality. Since the formulas are a bit different between the two, i can not simply copy the codes so i must start from scratch. The basics of my spreadsheet is that i have (3) columns: A master list, A filtered list, and an input list. I want the filtered list to change based on the values in the inputted list.

ColA = Input list
ColB = Filtered list
ColC = Master list

Items:
Orange
Red
Blue
Yellow
Green

ColA contains the colors i manually enter
ColB contains all the items in ColC that are NOT already listed in ColA (except for Red, i dont what that showing up)
ColC contains ALL the items above.

Two Examples of a functional worksheet:

ColA............ColB
Orange........Blue
Green..........Yellow
ColA........ColB
Orange....Blue
.............Yellow
.............Green

ColB is where the magic happens, it grows and shrinks based on the values in both the master list ColC and the input list ColA

View 8 Replies View Related

Create A Document To Be Available To Sevaral People

Oct 10, 2008

I am trying to do is create a document that will be available to sevaral people. The document will be edited by each person as needed. The completed document will then be used to order materials and supplies. What I want to hapen is each time the document is edited an alert is sent to the person responsible for the purchasing. I'm sure this is possible I just don't know how to do it.

View 14 Replies View Related

Create New Document From Word Template

Apr 28, 2014

I have a template document, created in MS Word. I want to generate, from Excel, a new document as would happen when you open the template from windows explorer or whatever ie. Template1.doc as opposed to Template.xlt.

The best I've managed to achieve is the opening of the template.

View 6 Replies View Related

Input In Cell Triggers Macro To Create Duplicate From Template Sheet And Rename?

Jan 22, 2014

I am currently doing an excel database of students application. I want a macro that creates a duplicate of a template sheet and renaming it based on the name of the student. Meaning once a name appears in the name cell, a sheet of that particular name is automatically created. At the same time, i want all the data regarding the applying student to appear the newly created sheet as shown in the attached file.

View 4 Replies View Related

Colouring Tabs Based On A Cell Value

Jul 28, 2009

I've been trying to get a macro together which would colour all the tabs in my workbook based on whether or not a certain value exists in a certain cell. In this case the cell is C7 and the word there is "elective class:".

View 7 Replies View Related

Create New Document On Button Click Containing Worksheets?

Aug 7, 2013

I have five worksheets among eight total in my workbook that I use as a report. I would like to have a button that copies those five particular worksheets into a new workbook and pastes all numbers as un-linked values. This would save me a TREMENDOUS amount of time generating my reports every month.

View 3 Replies View Related

Create Word Document With Bookmarks In Excel?

Aug 27, 2010

I'm trying to create Word documents (letters.doc) from Excel fields.

I already created bookmarks in Word and have the same Titles in A Row in Excel 2003 and I have tried the following threads:

Add bookmarks to Word from Excel Inserting data values from Excel into a Word doc using bookmarks

But I cannot manage it properly. I know that I need the code that goes on the lines of

Set WdApp = CreateObject("Word.Application")

rather than Set WdApp = New.Object

I cannot get Word to open a document! =(

It's basic letter creation, First_Name, 2_Name, Address_1, Address_2.. These have been bookmarked in Word and have exact same Titles in Columns A-D

View 9 Replies View Related

Create New Word Document From Template And Save As

Jan 21, 2014

I have been working on the following VBA code, which should copy specific charts from excel into specific places in a word-template.

I Am quite new with VBA, so I googled the code, changed a few things, and it works exactly as it should - except from one thing. When the Word-document is loaded from the template, I would like the document to be "saved as..."
Instead of just opening the template. I have tried

Code:
.ActiveDocument.SaveAs Filename:=fname & ".doc"

The code is as follows:

Option Explicit
Sub EksporterTilWord()

Dim appWrd As Object
Dim objDoc As Object
Dim FilePath As String
Dim FileName As String

[Code] ...........

View 1 Replies View Related

Select Tabs Based On Cell Entry

Dec 17, 2008

i'm trying to basically use VBA, so that when a list of work tab names are entered into a column in say Sheet 1..these tabs are then selected.

View 4 Replies View Related

Rename Tabs Based On Information In Cell

Mar 11, 2013

I am looking for a macro to rename tabs based on information in A1 on each tab. The thing that is causing me issues is the cell A1 has a formula in it and it changes on a daily basis with days of the week but the tab only updates when i double click A1 and press enter.

I need it to update automatically.

View 4 Replies View Related

Create Document With 3 And 4 Columns That Occupy Same Sized Area?

Apr 30, 2014

One of my coworkers is trying to create a document that has 3 columns in one part of the spreadsheet, but further down on the page, he needs to have 4 columns but wants them to use the same amount of space as the three columns. I have looked around and don't see how that is possible.

View 2 Replies View Related

Using VBA In Excel To Create Formatted Document From Dropdown Lists

May 18, 2014

We have a proposal generation tool that we use that is based in Excel, and it works very well indeed. However, we're wanting to add a 'Custom Contract Generator' tab to the spreadsheet, and I'm at a loss with how to build it.

What it needs to do is :

- Allow the end user to select which contract clauses are required for the proposal they are working on, ideally via a range of dropdown boxes.

- Use that selection of clauses via dropdown box to create a compiled, formatted text list made up of those clauses.

- Enter that information into a landscape orientation Excel tab in such a manner as allows for tidy, business-suitable printing.

In short, I want the ability to pick what clauses we want to use, and have Excel generate a custom contract Terms and Conditions page based on my selection. And I've no idea where to start.

View 1 Replies View Related

Splitting Document To Mine Data And Create CSV File

Jun 5, 2008

I've got an Excel document that is generated from a third party programme (See ExcelDoc attached) ....

View 9 Replies View Related

Rename Tabs (Sheets) Based On Cell Contents

Nov 10, 2009

I have 5 sheets. In the first sheet I have set up 4 cells where I want the contents of them to automatically rename the other 4 corresponing sheets.

Eg.
In Sheet 1, Cell B6, I want the contents (which will be text) to be the name of sheet 2 automatically.

In Sheet 1, Cell B7, I want the contents (which will be text) to be the name of sheet 3 automatically.

View 8 Replies View Related

Linking Input Dates To Quarterly Reports In Different Tabs

Jan 27, 2014

I'm lookng for a way to add functionality across tabs in a spreadsheet where if you put a date and $ amount in different cells on an expense sheet, it recognizes the date of the amount input and it shows up in another tab with a list of monthly expenses.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved