Create New Tabs From A List
Jun 16, 2014
I have a list of pairs of 406 pairs of currencies like the list below and I need to create a tab for each one of them and will take ages to do it manually, I am looking for a macro that can do it.
AUDCAD-AUDCHF
AUDCAD-AUDJPY
AUDCAD-AUDNZD
AUDCAD-AUDUSD
AUDCAD-CADCHF
AUDCAD-CADJPY
AUDCAD-CHFJPY
AUDCAD-EURAUD
AUDCAD-EURCAD
AUDCAD-EURCHF
AUDCAD-EURGBP
AUDCAD-EURJPY
AUDCAD-EURNZD
I have tried to use the one in other thread but I am not that good in editing the code:
Sub addsheet() Dim newsheet Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet) newsheet.Name = "ww16" End Sub
View 2 Replies
ADVERTISEMENT
Mar 19, 2007
I have seen it accomplished where all worksheet tabs are arranged in a drop down list, and was wondering how to make that happen.
View 6 Replies
View Related
Oct 12, 2009
I have a summary page that includes the titles for each tab within the excel 2003 workbook. I want to use the names of the tabs in the summary page and create it into a formula to lookup fixed cells within the various tabs. Sorry for not uploading an excel doc but I was at work earlier and the thread did not load for some reason, so I am reposting it.
View 3 Replies
View Related
Feb 28, 2013
Is it possible to create tabs within a tab? If so how?
View 1 Replies
View Related
Jun 9, 2014
I had in my macro toolbox a macro where in column A I listed names for worksheet the macro would then create and name the worksheets from the list in Column. But unfortunately our share drive where I kept the toolbox crashed and all the data was lost.
View 1 Replies
View Related
Jul 17, 2008
I have a column with multiple currencies. Is there a way to write a formula or some code that will look to that column, and create a new Tab for each new currency name it finds, and then name the Tab that currency?
For example, C5:C15 has an assortment of entries either USD, GBP, AUD. I'd like a search that looks to C5 and creates a new tab labeled whatever the first currency is, then move down the column and do the same thing every time it encounters a new currency, but pass over a cell if it's a currency that already has a tab made for it.
View 9 Replies
View Related
Aug 25, 2008
Well I am here at this fork in the road again.
I need to create 3 new tabs... 10,4, and 1
I have tried this and it creates the worksheet, but does not copy the "sheet1" as its format.
I need to do this 3 times.
For i = 1 To 1
Set ws = Worksheets.Add
ws.Name = "10"
Worksheets("Sheet1").UsedRange.Copy wsnew.Range("a1")
Next i
View 9 Replies
View Related
Jun 2, 2014
I'm trying to reduce some manual labor that I do each month by figuring out a way to create additional tabs for every different "branch" within a given column from a master table. The branch numbers may not necessarily be the same each month as some old may go and some new ones may come.
I have attached two excel workbooks. One shows the master "Data Table" and the other shows what I want it to look like "After Sorting". As you can see, I have to create a separate tab for each of the branches listed in column A on the master table. This becomes really cumbersome, especially when we really have about 20 branches but I'm only using these 6 for the example.
Data Table.xlsxAfter Sorting.xlsx
View 3 Replies
View Related
Sep 5, 2013
I don't know VBA code but i am familiar enough to know that a code can be written to separate out information into different tabs on a worksheet.
For example, I have a standard worksheet with say 20 columns going across and 20,000 rows going down. At each "name" change in row 1, I would like a macro to copy into a new tab. Basically the end result will have a tab for each name and the corresponding columns that go with the name.
View 2 Replies
View Related
Feb 6, 2014
I need to create a Worksheet within a macro that has 10 tabs. I had something running, then I made some changes and I got Application-defined or object defined error.
Sheets("Sheet1").Name=Sheetname(1)
Sheets.Add after:=Sheets(Sheets.Count)
I was looping thru this up to 10 now its not working. This isn't too complicated,
View 9 Replies
View Related
Feb 10, 2014
I have a large spreadsheet and want to sort by Column "L" and copy all the rows where Column L has the same value into a new tab named with the value in Column L.
View 2 Replies
View Related
Jun 4, 2009
i got a workbook made by one of the members in which on clicking of a button (make sheet)---->tabs of all the data in column A is made in that sheet. but if i want to copy a specific data that is present on main sheet to all the sheets created on click of button.
View 4 Replies
View Related
Apr 24, 2014
I need to create a formula using 2 different tabs within an excel workbook. I need to search column A on the first tab and column A on the second tab and if they match I need to compare column F on the first tab to column F on the second tab. (This column contains my staff names but the problem I am running into is on the first tab their names are listed first name last name and on the second tab they are listed last name, first name). If column A and F match I need to search column H on the first tab to column H on the second tab. If all columns match up to this point I need to take the data in column Q on the second tab and in put it into column K on the first tab. Is this even possible?
View 2 Replies
View Related
Jul 9, 2014
I would like to combine 2 tabs into one spreadsheet. I was not able to do so, because it exceeds the max rows allowed in excel. I have installed powerpivots but not sure how to combine data using powerpivots.
View 3 Replies
View Related
May 21, 2014
Is it even possible to create an IF/AND formula that draws data from multiple tabs?
For example,
(assume there are tabs named exactly the same as each of the data entries in column A)
IF A2 = "ARI" then D2 = ARI!H3. Is this possible?
View 14 Replies
View Related
Jul 20, 2014
I am trying to create a workload spread sheet for work I need to have the same looking spread sheet 365 times but also need each sheet to be dated, EG (tue,01/04/2014 through to tue,31/03/2015) I can create 365 tabs that have the same spread sheet on and I can create dates but not do both at the same time, it isn't fun doing copy and paste 365 time.
View 1 Replies
View Related
Apr 11, 2008
I work with contracts and have to report the sales for each contract by customer number, name, address, product code or sku, sales amount, quantity, and invoice date. Each contract number is associated with a product group and within that product group are a laundry list of product codes or skus.
Customers are often on different contracts for different products and may purchase some or all of the products on that contract. When I run a query from the system to extract this data, I get one sheet that contains 20,000 lines that have to then be sorted and seperated into different tabs based on the contract number. Keep in mind that a customer may be listed multiple times because each line in the query represents a product code and an invoice date.
I currently have a macro that will format the reporting such that it sorts the data, however, what it doesnt do is look for each instance of a particular contract number and separate it into different tabs.
So below are two examples: April and May 2008 Reports
April 2008 Report
Contract 1 contains 5,000 lines of data - extract into new tab
Contract 2 contains 5,000 lines of data - extract into new tab
Contract 3 contains 5,000 lines of data - extract into new tab
Contract 4 contains 5,000 lines of data - extract into new tab
Total lines = 20,000
May 2008 Report
Contract 1 contains 7,500 lines of data - extract into new tab
Contract 2 contains 5,500 lines of data - extract into new tab
Contract 3 contains 8,000 lines of data - extract into new tab
Contract 4 contains 9,000 lines of data - extract into new tab
Total lines = 30,000
So for the April Example, I would like excel to take this one list and break into 4 new tabs based on the contract number and carry over all of the data into that tab.
Where this may become difficult is that there may be more lines of data one month and fewer another. Im not sure if there is a function that will tell excel to stop when it reaches the last line for one contract number and to start a new tab for the next contract number. (see the month of May example)
View 9 Replies
View Related
Sep 12, 2013
I want to create a macro that creates a new .xlsx document based on cell values. And input 4 tabs into each document with specified tab names. I have a document that pulls from external sources and fluctuates with amount of data per day. I envision something that will make a new document named for the contents in cell A1, then function as a control+down to create a new document for A2, then A3 until there is no content left (should mention these are lookup formulas, and if there is no data it pulls a value of "0")
Is there a way to put in the code, the tab names it would create in each new document, or would that have to look to a cell value for the naming? The tab names would be "GS", "MYSS", "COLL SHEET", and "WIRE".
View 1 Replies
View Related
Dec 6, 2008
I have in column M ( starting at M2 and going through to M273 ) a list of names I wish to have new Tabs automatically made for.
There are some cells in this column that are blank and therefore have no name.
I need each new Tab to be a copy of a template sheet called 'DataTemplate'.
I am currently using the following formula, and I have it pasted in the sheet code of the worksheet where the list is found ....
Sub test()
Dim r As Range
On Error Resume Next
For Each r In Range("m2", Range("m" & Rows.Count).End(xlUp))
If r.Value "" Then
Application.DisplayAlerts = False
Sheets(r.Value).Delete
Application.DisplayAlerts = True
Sheets.Add.Name = r.Value
End If
Next r
End Sub
However, the new Tabs are not being generated. I've tried saving the file, exiting and coming back in, but still no new Tabs.
What am I doing incorrectly ?
View 6 Replies
View Related
Feb 2, 2012
I have a large list of names that I am breaking into three groups based on last name (A-G, H-M, and N-Z). The spreadsheet is then sent to a group of processors who work on the names that are found on their tab.
I start out with the complete list on each tab. Then I use a For Next loop to go through each tab and delete the rows for the names that do not below on that tab. This process is working fine, but I am figuring their is a better method of doing it.
Code:
Sub PopShts()
Dim wsAG As Worksheet, wsHM As Worksheet, wsNZ As Worksheet
Dim lRow As Long
[Code].....
View 4 Replies
View Related
Apr 24, 2012
I am trying to create a master list in a new sheet based on the data contained in 4 separate tabs. The data is Username, Display Name, Company. Unfortunately some users have accounts in 2 of the companies (with the same username) and I need these to default to Company A.
The output need to be username, Display Name, Company.
View 1 Replies
View Related
Jul 23, 2013
is there a method to do this besides writing them out individually?
View 5 Replies
View Related
Oct 5, 2006
I am trying to take data from one spreadsheet and do a couple of things. First, i need to create a tab for each column and name the tab after the name in row 1. (this code i already have, it is below)
Second, and here is where i need help, i want to put the tab name and corresponding data (all in the same column on the first sheet) onto each tab. Essentially i am just divying up each column on my master sheet into its own tab so that i can do further data analysis.
Sub GenWStabnames2()
'Kemper Ohlmeyer based on code from David McRitchie
Dim cell As Range
Dim newName As String, xx As String
Err.Description = ""
On Error Resume Next
'--cells with numbers, including dates, will be ignored,
For Each cell In Worksheets("Manager list").Range("fund.names")................
View 9 Replies
View Related
May 18, 2007
I have a workbook with 37 sheets in it. 36 of them are three per month (e.g JanCash, JanWeekly, JanMCR, etc) Since we make updates/ changes to the file throughout the year I cannot reuse the files. Also since we have accounts on different fiscal years, I need a way to rename the sheet tabs from a list. Does anyone know how I can do this with VBA code?
View 2 Replies
View Related
Jan 4, 2013
I have an (organization) work book that contains departments in different tab with each department having its own tab. In each tab is the employee name, dept manager, dept number and emp number. In the CoverSheet (main sheet) I want to put the department numbers in a drop down menu.Upon selection of a department number i want to Look in the whole workbook to see where the department number is, pull up the department head and all the employees in that department with their employee numbers
The reason for this is that I want to be able to add a button to delete/edit to be able to edit employee details centrally from this particular (CoverSheet) sheet and update the relevant sheet.
Also put in an input box to add employees and update the relevant tab (department)
View 7 Replies
View Related
Aug 18, 2013
I am trying to setup a file that has three tabs - LIST, COLOR AND PLANT.
I want to be able to select a color or colors (red, blue, yellow, green) and a plant or plants (tree, shrub, flower, grass) using radio buttons, maybe?
If i chose red and blue for a color and chose tree, shrub and grass for plants, i would like to populate the LIST tab with these items.
I'd also like to give an associated value to each color and plant. for example, for the colors, i could choose values between 1, 2 and 3. if i chose red 1, it would add "red 1" to the LIST. if i wanted to later change it to 3, i could do that on the COLOR tab and the LIST tab would update automatically.
View 6 Replies
View Related
May 17, 2013
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies
View Related
Nov 21, 2013
I'm trying to create a staff rota which will populate a rota randomly when prompted - I have been trying to find some way of connecting the random lists and the staff names, though this has proved difficult (to say the least!). How best to proceed? I'm also fully aware of the possibility that my present design will also double book people (place then on reception and telephone duty simultaneously).
View 3 Replies
View Related
Feb 25, 2014
Is it posible and how to create a list of barcodes from a list of numbers on the worksheet?
Strokescribe seems to have some ind of solution but the data can't come from the worksheet.
View 8 Replies
View Related
May 23, 2009
I've searched the forum and believe this thread to be the closest to what im looking for, but its doesnt completely apply: matrix to list conversion. I have an attachment to support my questions (see attached). I have a matrix of words (strings) that contain repeating and non-repeating contents. The matrix also has spaces which are of no value. Essentially, the VBA needs to ' analyze' this matrix and create a consolidated frequency list (as shown in the file).
The matrices are HUGE and therefore some of the clumsy VBA i am using is turning out to be a bit inefficient. The file also contains formulas and such that I cannot use AutoFilter nor can I use Insert or Delete rows...so the VBA shouldnt use those either.
View 6 Replies
View Related