I would like to know if there is a way to compare the current file in a loop with the next file in the loop without writing two loops. Here is the code I have, and in red is the code I would like to have it do. I just don't know if it's possible with this type of loop.
Code:
preface = Format(lPrefaceNo, "0000")
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set mainFolder = objFSO.GetFolder("S:")
[Code]....
I have the following code that I want to download everyfile at the listed ftp site to a folder on my computer. I was thinking about trying to make a key with dates in thisworkbook sheet1 starting in cell A1 and have it loop through.
Code:
Private Declare Function URLDownloadToFile Lib "urlmon" Alias "URLDownloadToFileA" (ByVal pCaller As Long, ByVal szURL As String, ByVal szFileName As String, ByVal dwReserved As Long, ByVal lpfnCB As Long) As Long
[Code].....
I have a folder that has multiple files that i would like to pull data from. This data is in the same cell in each file so all i would like to do is add the total value up at the end once it finished looping through all the files and display it on my sheet. Some of these files could have 1 worksheet where others might have 3-4. If I only have 1 file in the folder it works perfectly fine but as soon as the second file opens i get a Subscript Out of Range error (See code below for the line this error occurs on).
[Code] .......
Is there a simple way to loop through and filter the values in col1, then save it to a file named by the filtered value? Would be good if it could keep all the formatting as well.
View 1 Replies View RelatedI have a For loop, its an array with 5 file names in it. The loop checks for the files in the path, and if the file is there it places the file in the corresponding sheet in the workbook. If it is not, I get the option to browse for the file. Originally all 5 files were required, however now the requirements changed and only 4 are required the last file "byband.csv" is not required. So they want the option a message box telling the user the file is not required they can browse or keep going.
I worked out the second part but only by taking "byband.csv" out of the loop and writing a separate procedure for it, I wondered if in my original procedure I could isolate "byband" and if not found go to another part of the procedure. Basically, I needed to do the following:
If the file in the array byBand.csv is not found, Then:
vmbProceed = MsgBox(strFifthImportFile & strMessage, vbYesNo + vbQuestion, strTitle)
If vmbProceed = vbNo Then
Exit Sub
Else
go to Line 1 in the procedure below.
Code:
Sub import_Employee_Data()
'This is Step 1 when the frmDataImportSplash is activated.
'This procedure imports the byEmployee.csv sheet. The procedure checks if the file is
'in the same directory as the template. If the file is not there, a browser window appears to allow the user
'to browse for the missing file. A series of message boxes guide the user through the process and
'verifies that the user picked the right file. The user can cancel the import at any time.
Dim strPath As String
Dim strFirstImportFile As Variant
[Code] .........
This is the code I am using, I can not remember where I got it from.
Code:
Sub PDF()
' Saves marked sheets as PDF file.
Const PDF_path = "c:
eports"
Dim Snr As Integer
Dim Name As String
'Process all sheets in workbook
[code]....
This outputs all worksheets that have a specific value for A1, "Y".
My problem is it always prints exactly one too many, an extra copy. I think it may have to do with a broken loop?
I need a macro to loop through a dir and the sub directories to find xlsm files, when it finds one open, go to the sheet named data, look at c1 and if the value is between 12.1 and 13.4 then i need it to write the file path, filename to a1 in my excell sheet and then write the value from c1 in the original file to A2 of line in my excel sheet.
I have hobbled pieces of code together without any good results.
My problem is that I want to loop through a directory that contains csv files. The directory is dynamic so everytime could be a different number of files inside. I want the loop to go through each file and check if that file exists. If it doesn't to print a message that this specific files doesn't exist. Until now I got the following code:
[Code] .........
I guess I should somehow place the counter j inside the Dir path in order to check if everytime time the file[j] exists?
Code that loops through all folders in a directory, to check each workbook in each of those folders. If any workbook name in any of these folders matches a predefined string, then open this workbook for some other codes to run.
View 2 Replies View Related
I have been trying to process Excel files in a directory with the following
Sub FindExcelFiles()
Dim foldername As String
Dim FSO As Object
Dim fldr As Object
Dim file As Object
Dim cnt As Long
foldername = "c:usersseagreendesktopTuesdayFeb102009week ending feb 7 2009 esting2"
Set FSO = CreateObject("Scripting.FilesystemObject")
Set fldr = FSO.GetFolder(foldername)
For Each file In fldr.Files
If file.Type Like "*Microsoft Office Excel*" Then
cnt = cnt + 1
End If
Application.StatusBar = "Now working on " & ActiveWorkbook.FullName
DoSomething ActiveWorkbook
Next file
Set file = Nothing
Set fldr = Nothing
Set FSO = Nothing
Range("A1").Value = cnt
End Sub
Here's the stub for the subroutine that's being called:
Sub DoSomething(inBook As Workbook) 'Massage each workbook
'Debug.Print "Hello"
Debug.Print ActiveWorkbook.FullName
End Sub
I am using Excel 2007. I found out I cannot use Application.Filesearch as Microsoft has dropped this method for 2007. My problem now is that I just see "Now working on c:usersseagreendesktopTuesdayFeb102009week ending feb 7 2009 esting2file1.xls written six times in the immediate window.
I have developed a user form in VBA which is used for entry into an excel worksheet. From this data, I need to do the following:
1) Create 2 output files for Job data entitled "J" and another file entitled "S". The "J" and "S" is captured in a field in the data. I need to hit a button that allows these 2 output files to be produced, so I need to 'loop' through rows of the data to do this/
2) In addition to 1), the user needs to be able to 'select' the date range they would like to see 'J' and 'S' data over. This will be based on a field called "Startdate'. How could I do this with the button above-can I parse an input value to a form and select the 'J' and 'S' files on this.
What I have is a master file that needs to pull info from other sources (a simple copy and paste)
those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
I was wondering if anyone had any code to loop through every file in a folder and list the file name along with every sheet name in that file? I'm using Excel 2007.
View 4 Replies View RelatedI am trying to open set of excel files to fetch data starting from a master excel file where the links are given using a loop. Some of files given as links are either absent or the link is wrong.
* What is the syntax to find if the link is correct/present
* What is the syntax to find if the file is present in specified location
* What is the syntax to find if the file is password protected to open
* I use error handler to resume the next statement if OPEN statement fails.It works fine inside the loop only for first two files.
For example if the third link is errorneous the error handler fails and RUN TIME ERROR occurs.
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedI have a workbook that contains, say, 50 worksheets: the first two worksheets summarise the data and are static in that they don't move position. However, the next four worksheets contain certain data for any given month. Each time a new month comes along, say, November, I insert four new worksheets after the two static ones as a result October's four worksheets are simply moved down the line in terms of worksheet order.
I need a macro to refer to the first six worksheets only (not the other tabs). I opted for index referencing for each worksheet, ie one - six. Now within these six worksheets in any given month, I need to sort the data by a certain column. The problem: in sheets 1,4,5 and 6 I need to rank by column E, but in sheets 2 and 3 I need to rank by column C. I have stepped through the code, which works for sheets 3-6, but doesn't seem to refer to sheets 1-2.
Sub WorksheetLoop()
'
' Loop through an indexed number of worksheets; _
' & this ensures that the worksheet range is dynamic _
' and is able to adjust when new sheets are added/removed, etc.
'
'Dim ws As Worksheet
Dim i As Long
Dim ws As Worksheet
[code]....
I've worked on a solution for this thread (http://www.excelforum.com/excel-prog...-automate.html) but have been mentally challenged with how to avoid changing the loop counter in one of the loops I have used to resort an array of file names from the getopenfile dialog.
The aim of the shown code (see post 12 of the above link for attached file) is to check if the file containing the macro is included in the array returned by getopenfile while sorting the array of file names, and if so, moving it to the end of the array for "deletion" by redimming the array to exclude the last item. This problem of the open file being selected in the dialog may never arise, but... as the OP's request in the other thread was to allow two-way comparisons between numerous files, I've considered it likely enough to test for.
Here's the code I have settled for esp between the commented lines of hash symbols, which does change the counter (see the commented exclamation marks), but prevents an infinite loop (on my second try!) by using a second boolean flag of "HasCounterBeenChanged". Is there a better way of doing this? Or, alternatively (not in my thread title), is it possible to prevent the active file being selected through one of the arguments in the getopenfilename method?
I am working on some code that loops through a column of number values. Whenever it encounters a number value and a blank cell in an offset column, it places that number value into an offset cell (forming a separate column to be compared to another column in a separate sheet). I would like to take all the values in that new column and begin placing them in a new column in a separate sheet adjacent to another table. Most of the time, these values should match the adjacent values in the separate worksheet. However, if they don't match, I would like a new row to be created for that mismatched value.
For example. This is the first worksheet. So far, my macro loops through the column with rows 1-5. It looks in the offset cell(0,2) for Isempty value and then places that value into the offset cell(0,6)
text
1
text
text
[Code]....
For Each loop can be instructed to loop starting the bottom of the range. I know that a For To Loop can handle looping from the bottom up,
Sub Filterout()
Dim c As Range
Dim rng As Range
Dim i As Long
Dim lrow As Long
Dim counter As Integer
lrow = Cells(Rows.Count, 3).End(xlUp).Row
Set rng = Range("c2:c36")
For Each c In rng
If Left(c.Value, 1) "~~" Then
c.EntireRow.Delete
End If
Next c
i have a problem with a nested loop:
it seems like the first instance of the code is running the way i want it to run, but when it starts with the second instance, it does the first search and copy, but it seems like the nested loop is being ignored.
am i doing something wrong?
dan
==========================================================
Thanks to Aaron Blood for the find_range function. i also poached the lastrow function from somewhere on ozgrid, but I cant remember the name of the poster.
==========================================================
Sub new2()
Dim Org_Area As Variant
Dim Item As Variant
Dim Copy_To1 As Variant
Dim Cell_Ref As Variant
r = 1 ..................
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies View RelatedCan't seem to figure out why my Do Loop keeps giving me an Error of "Loop without Do".
View 14 Replies View RelatedI have got a loop which is working fine but now i need another loop which will run till the end but need to repeat itself as soon the column x become 1 the highest number would be 3
here is my main loop A1 = 5000
and second loop need to run inside the this loop
Sheet1.Activate
i = Range("A1")
For b = 1 To i
If Cells(1 + b, 3).Value = "P" Then
Cells(1 + b, 29).Value = 1
Else
If Cells(1 + b, 3).Value = "S" Then
Cells(1 + b, 29).Value = 2
Else
If Cells(1 + b, 3).Value = "C" Then
Cells(1 + b, 29).Value = 3
End If
End If
End If
Next b
I have loops working in other loops. The macro is almsot working well. It does the calculation i want but it fails to stop a loop, because of that, the macro can't run the next main loop (c), which is to move to the next cell where the calculations must be run.
I attach a file. the troubleshooting macroation is Sub Itiration.
The code of this macro are bellow. Basically, the loop using d as counter run into an endless loop. I don't how to stop this loop without affecting the results which are calculated correctly.
Sub Itiration()
Dim CurCell As Object
Dim TempSum As Double
Dim d As Integer
For c = 3 To Cells(3, 4)
If Cells(11, c) > 0 Then
For i = 1 To Cells(10, c)
Do
Going through a loop, I am trying to load pictures into an image box (or alternatively into a label) one by one i.e. going through the loop the first time, I want to load picture 1, then on the second loop, picture 2 and so on. A bit like an automated slide show.
I have written a simple loop and have used the loadpicture function to load the picture into the image box. When the code runs, the image box only gets populated after the last run through the loop. I have tried using application.screen updating function and the image.activate function without success. It is a simple bit of code and I expect an easy problem to solve if you know excel vba well.