Transpose To New Sheet With Header Row
Feb 28, 2010
How can i achieve this?
Copy row, create new sheet, tranpose and paste with header row.
So If i have 10 rows with row 1 as header row, it should make 9 sheets.
The name of each sheet should be the one in the first row.
e.g. sheet name = master
header1 header2 header3 header 4 header 5
a b c d e
f g h i j
k l m n o
The result will be three sheets
sheet name = a
header1 a
header2 b
header3 c
header4 d
header5 e
sheet name = b
header1 f
header2 g
header3 h
header4 i
header5 j
sheet name = c
header1 k
header2 l
header3 m
header4 n
header5 o
View 9 Replies
ADVERTISEMENT
Aug 21, 2014
I am trying to transpose data from sheet 1 into sheet 2 using a macro
i want to tranpose A1,B1,C1,D1 from sheet 1 to A1,A2,A3,A4 in sheet 2
then repeat the process for all the data in sheet 1 until it has all tranposed over.
View 14 Replies
View Related
May 29, 2014
My workbook contains 2 sheets one called "UK" the other called "Stock"
I need Rows 75 and 76 from "UK" to be transposed into sheet "Stock" in Cols C and G, respectively.
I tried to do this with Paste Special and Transpose, but because these rows have formulas in them when you transpose it it shows #REF! in each cell.
View 3 Replies
View Related
Feb 19, 2014
I am working on a spreadsheet that has (7) sheets or (7) tabs. The First tab is the "Summary Tab" and the 3rd tab is the "Plate" tab. I am working in a range of cells that go up and down on the "Summary Tab" and I need to fill them with the values from the "Plate Tab" that goes side to side or across. I can enter into the top cell on the "Summary Tab": =Plate!B47 and I will get the value that I need. However, I want to copy the formula or fill down and have it pull the values from the cells on the "Plate Tab" Horizontally like this (as I fill down) =Plate!_$47 Where the "_" changes to "C", "D", "E", etc.... but it stays on row 47!!!! How can I do this????
View 5 Replies
View Related
Jun 21, 2012
I need the following data transposed to the next sheet in this formatClaims
Assessor:
Claim ID:
Quality Checker:
Q/Assessment Date:
Correct Member
Correct Payee
Correct re-imbursement address
Correct amount & currency
[Code]...
where score denoted the marks achieved. with the code for the same.
Claims Assessor:
abc
Quality Checker:
xyz
Claim ID:
165663
Q/Assessment Date:
21-06-2012
[Code]....
View 3 Replies
View Related
Oct 17, 2008
I'm having trouble programming in VBA. Basically, I need a code which allows me to create a new worksheet, with headers. So far I have this
View 3 Replies
View Related
Feb 4, 2014
I have one workbook with two sheets. The first sheet contains the data in columns A & B. In Column A there are a number of values that are the same eg: A1,2,3,4,5 all equal "Home" A6,7,8 equal "Work". In column B there are "Comments" none which are the same.
I need a VBA that will search down column A in sheet one and find all the "Comments" for "Home" and transpose paste the comments into sheet 2 so A1 will be "Home" B1 will be the first comment, C1 the second comment, D1 the third comment and so on.
My sheet one will contain about 1000 different values in Column 1, so I need it to search for duplicates rather than the text "Home".
View 6 Replies
View Related
Mar 21, 2014
I have the below VBA but am getting a 1004 error and when I step into each line I do not see the macro populating the cells as designed. The purpose of the macro is to take a list from the "EmployeeBillableHours" worksheet select the entire list s.tarting from row 2, then goto to "Client" worksheet, then starting at cell J6 paste each item on the list and then move 4 cells to the right and paste the next item on the list to the end.
Code:
Sub ClientListtoClientTab()
Dim lr As Long: lr = Worksheets("EmployeeBillableHours").Range("H" & Rows.Count).End(xlUp).Row
[Code].....
View 1 Replies
View Related
Apr 21, 2014
I have a dimensional array / matrix that is current a 9 by X, where x depends on the amount of entries a user makes.
Anyways my question is that I have a sheet called "Database" and I wanted to know if there was a simple code to transpose my array on that sheet starting at cell "A2".
View 3 Replies
View Related
Sep 24, 2008
Looking for some code that will move a list that goes from B3:B300 (down the column) to "sheet B" A1:IV1 (across the 1st row).
View 9 Replies
View Related
Aug 27, 2008
I am trying to understand how to simply COPY the Header Rows from one sheet to another sheet.
The first four rows have the report heading with the fourth having the column titles.
View 9 Replies
View Related
Nov 10, 2006
I need to figure out how to tell if the sheet is empty with the exception of the header row that resides in Row 1. I have looked though the archieves, tried about 10 - 15 possible solutions, only for one thing or another to go wrong.
What this does is, if the data sheet is empty except the header, I need it to report that the user must add data. I have it checking row 1 column 1 but thats the header, and row 2 column 1 may or maynot contain data..
So if row two is empty then report that the sheet is empty, sans the header.
Sheet name = Data
Row 1 has header
Row 2 competely empty?
View 5 Replies
View Related
Oct 20, 2013
I've used the following formula successfully to pull data from multiple sheets and provide the total on an analysis worksheet. Example of worksheets and formula.
=DSUM(INDIRECT("'"&A2&"'!D:D"),$B$1,INDIRECT("'"&A2&"'!D:D"))
Example of one of the individual sheets holding original data:
A
B
C
D
[Code].....
Example of what I want to see using the Transpose formula (Analysis sheet):
=TRANSPOSE(INDIRECT("'"&A2&"'!C:C"),$C$1,INDIRECT("'"&A2&"'!C:C")) (My theory that currently doesn't work. I'd like to be able to pull data across worksheets and yield the transposed data into the corresponding row of the same merchant row.
A
B
C
D
[Code].....
View 9 Replies
View Related
Jan 7, 2010
I have a excel worksheet which i am exporting into a word document through a macro labeled "Go". Basically it will query the excel sheet and the word document i have, will take the values and put them in the correct placing.
My problem is...
I know that excel will use the first row as the table headers, but what if i want it to start at like row c? and use that row as table headers. How would i go about doing that?
View 5 Replies
View Related
Feb 3, 2014
Extract data from one sheet to another sheet then transpose automatically.
I have attached the work book of what I'm trying to accomplish.
View 14 Replies
View Related
Apr 21, 2002
I have multiple sheets on which users enter data in Cells B3 to B21 on each sheet.
I have a master sheet where the information entered on individual sheets is copied by links. On the master sheet the information is displayed in Rows. Thus data on Sheet1 B5:B25 is displayed in Row 6 cells H6:Z6 of Master Sheet, data on Sheet2 is displayed in Row 7 cells H7:Z7 etc. The formula in H6 of the Master Sheet is =Sheet1!B5, in H7 it is =Sheet2!B5 etc. It is of course not possible to use Autofill to copy formulas across on the Master sheet. It can be done manually but there are hundreds of cells to fill.
Is there an elegant way to copy the formulae on individual sheets onto the Master Sheet.
I want to be able to repeat the procedure later if additional sheets need to be added.
View 9 Replies
View Related
Jun 23, 2008
Is there a way to link a header or a portion of a header to a specific cell?
View 14 Replies
View Related
Jul 21, 2014
I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
View 6 Replies
View Related
Sep 23, 2013
I have 2 columns on sheet 1 as below. I need a code to put all the data in column B vertically on sheet 2 as the result shows. Please note all cells data will be off various lengths all seperated by a comma.
Sheet1 Â AB2BK
1003 CV1173, CV3133BK1004 CV1010, CV1010A, CV13514BK1005 CV1012, CV1257, CV17995BK1006 CV1836, CV506
Result after code has run.
Sheet2 Â AB1
BK1003CV11732BK1003CV3133BK1004CV10104BK1004CV1010A5BK1004CV13516
BK1005CV10127BK1005CV12578BK1005CV17999BK1006CV183610BK1006CV506
View 2 Replies
View Related
Apr 18, 2013
I am working on a "3 worksheet" excel workbook. The first worksheet does not require any header.
I'd like to enter data into the second sheet (say cells A1 and B1), and use VBA to pull from those cells to generate the same custom header for both the second and third worksheets.
For example, I'd like the header to pull "# 123456" from cell A1, and "789" from B1 in sheet two, putting them in a centered header for both sheets two and three (same reference cells from sheet two for both, not new values of A1 and B1 from sheet 3 for sheet 3 header). I'd like to format in a way that looks something like this:
#123456
789
I'm currently running Excel 07, and was able to pull from a cell on one worksheet into that sheet's header but couldn't get it to span multiple sheets.
View 3 Replies
View Related
Nov 12, 2009
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
View 9 Replies
View Related
Nov 18, 2011
I've been trying find an appropriate formula to extract the column header from a table in a different sheet if the row header and value in that table is known.
in the lookup table the row titles (column A) are product codes, column titles (row 2, D through AX) are business names and the table values are quantity.
In a different table I have product codes in column A and in column B i have the max number/quantity of products for that code. In column C i want to put the company name associated with the product and the number/quantity.
View 4 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Mar 5, 2009
I have a booklet I want to print from Excel 2000. I'm not seeing how to have the HEADER on page one only. The header is coming up on all pages. Is there a way to tell Excel to print the Header on page one only?
View 2 Replies
View Related
Dec 2, 2009
I am working on a Skills tool for work which is in its very early stages and i want to record the results in the following way:
The questions are on a tab called Q's. the results are summarised in a column, range C4:C32. On this sheet i want an 'enter' button assigned to a macro which then sends the summary of results to the 'Future Skills' tab.
I have recorded a macro which moves the results and does what i want however can this code be ammended so that when the next person completes their questions and presses enter, their results are added to the next line down, (allowing for easy comparrisons) heres the recorded macro.
View 3 Replies
View Related
Jan 9, 2009
The data is in column A & B so the transpose would be =TRANSPOSE(A1:A10). What I want to do is add (A1 to B1), (A2 to B2) etc. I’ve tried =SUM(Transpose(A1:A10),Transpose(B1:B10) etc, but can’t get it to work.
View 9 Replies
View Related
Nov 21, 2012
I have a worksheet where I would like to transpose the 3 columns into 1 row.
I would to change
ID
NUMBER
DATE
[Code]....
into
950 9.8 01/01/1992 950 6.34 01/01/2002 950 5.43 01/06/2002 950 6.76 01/09/2002 950 7.44 01/01/2003 etc...
This worksheet has 5413 rows with different ID's and it is attached : Columns to row.xlsx
View 2 Replies
View Related
Jul 3, 2014
in transposing all data, I have data in the format below:
Material ID | Attribute Name | Attribute Value |
MaterialNo.123 | Color | Red |
MaterialNo.123 | Color | Cherry Red |
MaterialNo.123 | Color | Sunset Red |
I want to transpose it to show:
Color Color Color
MaterialNo.123 | Red | Cherry Red | Sunset Red |
View 2 Replies
View Related
Apr 8, 2009
I have a spreadsheet of 16,000+ lines that I need to transpose. All the L lines need to line up after the E lines. The L is going to be dropped, so I only need column B to copy over.
What I have tried so far: IF(AND ($A2="E",$A4="L"),$B4,""). Using that method, I would have to edit $B4 for each possible L. There are up to 123 L entries per E. See attachment for more detail.
View 2 Replies
View Related
Apr 24, 2009
I have dynamic titles in row A, listed in no order and with blank cells between all the titles. On another sheet I want the titles listed in column 1, alphabetically and without gaps. I have gotten very close by using the COUNTIF function, but have had trouble looking up the results.
View 2 Replies
View Related
