VBA Copy Dynamic Range From Multi Sheet To Sheet3

Oct 25, 2012

I am trying to copy a range of valid cells "non-blank" from "sheet_a" ,"sheet_b" ,"sheet_c" to "sheet3" i was successful to copy from one sheet only. how to copy from all the sheets listed from the same workbook.

following is the VBA code i am using

Sub CopySample()
Dim shSrc As Worksheet
Dim shDst As Worksheet

[Code]....

View 1 Replies


ADVERTISEMENT

Copy And Pasting A Dynamic Range From One Sheet To Another?

Aug 5, 2014

I'm trying to copy a range of column headers from one worksheet and paste them in another using a macro
The source range starts at Q1 and runs along row 1 for a variable number of columns each time.The destination cells start at B1 and will run along row 1 for the same number of columns.

I've got as far as counting the number of source columns

PHP Code: 

Dim LastDate As Long

LastDate = Sheets("Edited data").cells(1, Columns.Count).End(xlToLeft).Column 

how to paste to a changing number of columns

PHP Code: 

 Sheets("Edited data").Range("Q1", cells(1, LastDate)).copy Destination:=Sheets("Variety Total").Range("B1", ????) 

View 2 Replies View Related

Copy Data From One Sheet To Another With Dynamic Range Selection?

Feb 21, 2011

The CRM application that we use provides output in an excel sheet "Table View 1". I want to be able to copy the data that is dumped to a sheet to another sheet. The requirements:The data output range is different. Sometimes it is 4 rows and sometimes it is 25 rows. I want a mechanism where based on the output, the formula/macro automatically copies the information to the new sheet.The first 2 rows need to be excluded when the copy is being made.

View 6 Replies View Related

Populate Cell A1 Of A Sheet3 Without Explicitly Selecting Sheet3 First

Aug 26, 2009

while running the macro, how do you populated cell A1 of a different sheet without first seleting sheet the desired sheet. Example im on sheet 1 and iwant to move a value "TEST" to cell A1 of sheet3?

View 2 Replies View Related

Copy Multi Cell Range To Destination Workbook Range

Dec 23, 2008

Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes

When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.

View 2 Replies View Related

Setting Range For Sheet3?

Jul 2, 2014

How can i set the range for the Sheet3 i have taken IngDataColumn. It select only particular column of fixed that is 4

[Code] ....

View 14 Replies View Related

CountIF In Multi-Sheet Range Or Data Cube

Jun 10, 2014

Im trying to count the number of time a Value is in a multi sheet Range

the formula

=COUNTIF(rangename,Value or cell ref to count)
or
=COUNTIF(SKULIST,A2)

Works if my range "SKULIST" is on a single sheet but returns #VALUE! error if its a multi sheet range

View 9 Replies View Related

Copy Two Dynamic Columns Into One On Another Sheet

Aug 12, 2008

I've searched and tried some similar examples but cannot find a fit that works. I have two columns of data on the same worksheet- IO2 & IR2 (3 columns apart) that will have varying end lengths. I need to combine these into one column on a different tab ( cell A8)- one on top of the other. When it gets to the first blank cell I want it to stop and grab the second column till it gets to the first blank cell. Note-these columns need to stay in the current order but format will not matter. It sounds so simple but I cannot make a formula or macro do what I need it to. I would prefer a macro because the workbook is already so slow.

There is a second part too (but I couldn't even get past the first!). Once the above is done. I will actually have the process repeat and return two different columns next to each other. I then want to reference these two columns and a month and find the correlating set of date in the first worksheet and bring it over. Here is the current macro I was trying (for part 1) but I can only get 1 column returned.

Sub FCST()
Dim improw As Long, impColumn As Long, MyCell
Dim ws1 As Worksheet, ws2 As Worksheet
Dim improw2 As Long, impcolumn2 As Long
Application. ScreenUpdating = False
Set ws1 = ActiveWorkbook.Sheets("Marketing")
Set ws2 = ActiveWorkbook.Sheets(" Forecast")
improw2 = 8
impcolumn2 = 1
impColumn = 249
Do Until impColumn = 252
improw = 2
Do Until improw = 11078 'this is the number of possible entries in each column.........................

View 4 Replies View Related

Dynamic Range For A Copy Macro.

Feb 20, 2009

I need a bit of assistance in identifying the dynamic range so that my macro below will work:

View 3 Replies View Related

Copy And Paste Dynamic Range

Feb 14, 2007

i have a range in a worksheet called "worksheet1" i need to copy and paste this into a workbook called "princiapl.xls. the range is dynamic but columns are always the same from A1 to G1 however the rows will change how do i copy and paste this into the other workbook

View 4 Replies View Related

Copy Dynamic Range Without Duplicates

Dec 28, 2007

Basically in sheet 1 column A I have a long list of part codes. This is an ever expanding list so I assume I need to make it a dynamic range. This list has duplicate entries of certain part codes which is fine. I need to keep sheet 2 up to date with these part codes but I don't want duplicates on this sheet. I was then going to use vlookup to derive some but not all information for the part from sheet 1. I would also like the vlookup formula to expand as new parts are added to sheet1 and then subsequently copied to sheet2.

View 2 Replies View Related

Join Dynamic Multi-dimensional Array

Apr 15, 2008

the built in "Join" function can join all elements of a 1-dimensional array into a string with delimiter. Now, how do I do that with multi-dimensional array if I just want to join 1 dimension of it.

For instance, I have:

m = 10
n = 20
Redim my(m, n)
'assign values to array here...

'I want to join, say, my(5, 0 to n) only
'How to do that without declaring a new 1 dimension array?

Also, I want to write a join sub/function to do the above for n-dimensional array, do I need to write each one for every number of dimension (1 sub for 2-dimension, 1 sub for 3 dimension, etc.)?

View 4 Replies View Related

Copy And Paste Cell In Different Sheet For Dynamic Pie Chart?

May 4, 2014

I have a sheet that gets updated from external source. For e.g. the B2 cell of sheet updates the date and C2 cell updates the value as on that date from the external link. Since, the value of the cells gets updated every time I open the sheet, I want to copy the value of cells to another sheet in chronological order ,when the file gets opened in different dates, so that I can present data in dynamic pie chart.

View 1 Replies View Related

Sort And Filter Dynamic Range On Different Sheet

Apr 4, 2014

We have 2 dynamic ranges (input, output) on different sheets (sample data below).

Sheet1> Input
Dynamic range 5 columns

Sheet 2>Output
Dynamic range 4 columns
- Include only rows IN=1
- Sorted by LEVEL (BIG to SMALL) and BUY (SMALL to BIG)
- Keep duplicates

What formulas should I place on Sheet2 avoiding Pivot tables or VBA?

Sheet1> Input (16 data rows)
A B C D E
Level Buy Sell Firm IN
16620 4.00 null F1 OUT
16610 5.10 0.80 F1 OUT
16600 11.40 6.60 F1 1
16590 24.50 18.60 F1 1
16580 44.90 37.10 F1 1
16570 66.90 59.60 F1 1
16560 84.40 78.70 F1 1
16550 95.00 90.30 F1 1
16540 99.80 95.60 F1 OUT
16530 100.00 98.00 F1 OUT
16611 6.66 0.497 F2 OUT
16600 9.09 1.96 F2 OUT
16589.1 20 12.5 F2 1
16578.2 41.66 33.33 F2 1
16567.3 73.33 65.21 F2 1
16556.4 90.9 84.61 F2 1
16545 98.5 91.66 F2 OUT

Sheet2> output (10 data rows)
A B C D
Level Buy Sell Firm
16600 11.4 6.6 F1
16590 24.5 18.6 F1
16589.1 20 12.5 F2
16580 44.9 37.1 F1
16578.2 41.66 33.33 F2
16570 66.9 59.6 F1
16567.3 73.33 65.21 F2
16560 84.4 78.7 F1
16556.4 90.9 84.61 F2
16550 95 90.3 F1

View 6 Replies View Related

Link Dynamic Named Range To Another Sheet

Apr 9, 2008

I have a dynamic named range named db in sheet1. I need to have the same range linked to sheet2 starting in cell A1.

View 3 Replies View Related

Copy / Insert Row In Sheet3 If Cell Value In Sheet2 Matches Cell Value In Sheet1

Sep 17, 2013

I am working a project where I need to copy/insert a Row of data onto Sheet 3 if values from Sheet2 are located on Sheet1. Here is my code so far:

Option Explicit
Sub move_rows()
Dim ws As Worksheet
Dim ws1 As Worksheet

[Code].....

View 3 Replies View Related

Copy / Paste Dynamic Range Of Cells With Data From One Day

May 28, 2014

I have a range of cells with data from one day. This range is "C36:K63"

Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.

Thus, day two should copy "C36:K63" into a new range: "C65:K92"

As you can tell, the rows will change each day, but the columns will always remain the same.

How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?

i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.

View 2 Replies View Related

2-dimensional Date Range With Dynamic Copy And Paste

May 23, 2007

Some of you may have seen my 2-dimensional Date Range Criteria thread . By request, that thread has been closed and I am opening a new one on a related, but infinitely more complex note.

The solution to the previous thread worked, but not well with my project. I'll go a little more in depth into how my project works, and try not to be too detailed and irritating.

I am trying to create a homebrew Learning Management System for some of the Training courses that my department offers. I've posted here a few times on the same project, and the advice from all previous posts has been excellent.

What I have so far allows users to input all of the relevant information about a participant, and then keep track of the dates when they took a particular course. They input this information with a Userform. This data goes into a Participant Master List, which is where the majority of the functions take place. There is a Workings sheet set to xlVeryHidden, which houses some other information, including results for searches, and finally there is the Report Template--the source of my original question.

The original question was how to make a formula that would track how many people from each department and site have attended training within a date range. That question was answered in the 2-dimensional Date Range Criteria of the report.

What makes it potentially more complicated is that a user might want to generate two or three reports at the same time to compare side-by-side. I'm pretty sure I can make something that will do this, and allow it, but the way it's looking could be really complicated--extreme headache, and a lot of VBA coding.

View 9 Replies View Related

Copy Multi-Column/Row Range Into Single Column

Apr 8, 2008

I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?

View 3 Replies View Related

When Data File Close Sheet To Sheet Range To Range Copy

Sep 28, 2008

i have a main.xls file and two data file dat1.xls and dat2.xls

mail named file have ar - br- cr- dr- er -fr sheets

dat1 named file have ar-br-cr sheets

dat2 named file have dr-er-fr sheets

and all this files data source is

colomn source a - fd
row source 29-4000

i want to make two commandbutton to main file first for dat1 second for dat2 file and i need a code to use at this buttons to make

when dat1 and dat2 close

main file user when click first button

copy dat1 file ar sheet colomn source a - fd row source 29-4000 cells to main file ar sheet colomn source a - fd row source 29-4000 cells

copy dat1 file br sheet colomn source a - fd row source 29-4000 cells to main file br sheet colomn source a - fd row source 29-4000 cells

copy dat1 file cr sheet colomn source a - fd row source 29-4000 cells to main file cr sheet colomn source a - fd row source 29-4000 cells

View 9 Replies View Related

Macro To Copy Dynamic Sheet In New Workbook - Save As Temp / Mail And Delete

Sep 15, 2014

Code to copy the sheet that get selected by if-then-elseif statement and paste in a new workbook, save the workbook as temp, email it and delete it,

sub sending_mail

Dim OutApp As Object
Dim OutMail As Object
Dim rng As Range
Dim DataWB As Worksheet

[Code] ......

View 2 Replies View Related

Dynamic Lookup Formula - Retrieving Result From A Set Of Range From Other Sheet

Sep 27, 2011

I have a query on retrieving the result from a set of range from other sheet.

Query: In the Sheet1 Column B has to take first two words from the
Column A & lookup the matching results from Sheet 2.
(The search range should be the first two words of each cell)

Result: The complete sentance in the Cells (First Two words) should get placed in the Sheet1 Column B

Example: The Expected result should be as mentioned below. (Blue in color should be the results)

Sheet1A BC1NameResults2abc def fkfeabc def words3ghi jkl kikgN/A4mno pqr stu lkasmno pqr must work5
Don't give my book don't give up6vwx yzyvwx yzy not7xwv uts rqpxwv uts yes8omn lkjN/A9ihg fed cbaN/A

Sheet2A BC1Lookup Data2abc def words3xxxghi jkl4yes you have to5don't give up6no you will not7mno pqr must work8vwx yzy not9Excel work10xwv uts yes11omn mre lkj12ihg not fed 13not work14

This is my query

View 7 Replies View Related

Dynamic Named Range :: Does Not Copy The Formula That References A Cell From Another Line

May 29, 2007

I am having a few problems with dynamic named range in excel 2000.

When adding new data to the range, excel extends the range correctly, but only copies some of the formula correctly. It does not copy the formula that references a cell from another line.

I am trying to create a excel spreadsheet and have a formula =e10-e9, which does not copy down.

View 10 Replies View Related

Copy A Selected Range Of Cells On Sheet One To A Range On Sheet Three

Aug 7, 2008

Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?

View 9 Replies View Related

Excel 2007 :: Sheet Name In Show Details For Multi-sheet Pivot Table?

Jan 30, 2014

Excel 2007.

I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.

Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.

Monday
Dig
Drive

Dave
4
5

Bill
2
7

Tuesday
Dig
Drive

Dave
2
7

Bill
8
1

I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).

Dig
Drive

Dave
6
12

Bill
10
8

So far, lovely.

But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.

So if I clicked on 10 above...

Row
Column
Value

Bill
Dig
2

Bill
Dig
8

That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.

So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?

View 1 Replies View Related

Application.inputbox: Range To Copy And Paste The Range's Link And Format To A Different Sheet

Oct 7, 2009

Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:

View 2 Replies View Related

Copy Range From Sheet A Then Find The Next Empty Row In Sheet B

Jun 2, 2014

I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).

I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.

I hope I have given you enough info this is what I have done so far

Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))

[Code]....

View 7 Replies View Related

Copy Column Value From One Sheet To Another With Path Of Sheet Specified In Range?

Feb 26, 2014

I need to copy columns b,g & h from workbook1 to workbook 2 c ,e, f

workbook1 is the path mentioned in cell A1

Workbook2 is the path mentioned in cell A2

View 1 Replies View Related

Copy Range From Sheet - Dialogue Box To Ask For New Sheet Name Then Paste

Mar 11, 2014

I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.

View 10 Replies View Related

Copy Specific Range From One Sheet And Paste To Next Available Row Of Different Sheet

Jan 20, 2009

I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved