Copy Dynamic Range Without Duplicates
Dec 28, 2007
Basically in sheet 1 column A I have a long list of part codes. This is an ever expanding list so I assume I need to make it a dynamic range. This list has duplicate entries of certain part codes which is fine. I need to keep sheet 2 up to date with these part codes but I don't want duplicates on this sheet. I was then going to use vlookup to derive some but not all information for the part from sheet 1. I would also like the vlookup formula to expand as new parts are added to sheet1 and then subsequently copied to sheet2.
View 2 Replies
ADVERTISEMENT
Jul 21, 2009
I am using the follwoing code which works as it is supposed to except that it does not remove the duplicate entries, almost as though the code skips that step. How can I fix this?
View 7 Replies
View Related
Feb 27, 2008
I am having 2 problems with dynamic named ranges. On one hand, I am getting a LOT of duplicates in some ranges and a lack of entries in those ranges that have too many blanks. Here is a sample of the dynamic named range in the first column:
This first range is called "NamedRange_1"
=OFFSET(Data!$A$2,0,0, COUNTA(Data!$A:$A)-1,1)
how to eliminate both the duplicates and the blanks?
View 6 Replies
View Related
Feb 20, 2009
I need a bit of assistance in identifying the dynamic range so that my macro below will work:
View 3 Replies
View Related
Feb 14, 2007
i have a range in a worksheet called "worksheet1" i need to copy and paste this into a workbook called "princiapl.xls. the range is dynamic but columns are always the same from A1 to G1 however the rows will change how do i copy and paste this into the other workbook
View 4 Replies
View Related
Aug 5, 2014
I'm trying to copy a range of column headers from one worksheet and paste them in another using a macro
The source range starts at Q1 and runs along row 1 for a variable number of columns each time.The destination cells start at B1 and will run along row 1 for the same number of columns.
I've got as far as counting the number of source columns
PHP Code:Â
Dim LastDate As Long
LastDate = Sheets("Edited data").cells(1, Columns.Count).End(xlToLeft).ColumnÂ
how to paste to a changing number of columns
PHP Code:Â
 Sheets("Edited data").Range("Q1", cells(1, LastDate)).copy Destination:=Sheets("Variety Total").Range("B1", ????)Â
View 2 Replies
View Related
Feb 21, 2011
The CRM application that we use provides output in an excel sheet "Table View 1". I want to be able to copy the data that is dumped to a sheet to another sheet. The requirements:The data output range is different. Sometimes it is 4 rows and sometimes it is 25 rows. I want a mechanism where based on the output, the formula/macro automatically copies the information to the new sheet.The first 2 rows need to be excluded when the copy is being made.
View 6 Replies
View Related
May 28, 2014
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
View 2 Replies
View Related
Oct 25, 2012
I am trying to copy a range of valid cells "non-blank" from "sheet_a" ,"sheet_b" ,"sheet_c" to "sheet3" i was successful to copy from one sheet only. how to copy from all the sheets listed from the same workbook.
following is the VBA code i am using
Sub CopySample()
Dim shSrc As Worksheet
Dim shDst As Worksheet
[Code]....
View 1 Replies
View Related
May 23, 2007
Some of you may have seen my 2-dimensional Date Range Criteria thread . By request, that thread has been closed and I am opening a new one on a related, but infinitely more complex note.
The solution to the previous thread worked, but not well with my project. I'll go a little more in depth into how my project works, and try not to be too detailed and irritating.
I am trying to create a homebrew Learning Management System for some of the Training courses that my department offers. I've posted here a few times on the same project, and the advice from all previous posts has been excellent.
What I have so far allows users to input all of the relevant information about a participant, and then keep track of the dates when they took a particular course. They input this information with a Userform. This data goes into a Participant Master List, which is where the majority of the functions take place. There is a Workings sheet set to xlVeryHidden, which houses some other information, including results for searches, and finally there is the Report Template--the source of my original question.
The original question was how to make a formula that would track how many people from each department and site have attended training within a date range. That question was answered in the 2-dimensional Date Range Criteria of the report.
What makes it potentially more complicated is that a user might want to generate two or three reports at the same time to compare side-by-side. I'm pretty sure I can make something that will do this, and allow it, but the way it's looking could be really complicated--extreme headache, and a lot of VBA coding.
View 9 Replies
View Related
May 29, 2007
I am having a few problems with dynamic named range in excel 2000.
When adding new data to the range, excel extends the range correctly, but only copies some of the formula correctly. It does not copy the formula that references a cell from another line.
I am trying to create a excel spreadsheet and have a formula =e10-e9, which does not copy down.
View 10 Replies
View Related
Apr 23, 2014
I have a list of names and an associating number with those names. I'd like to create a dynamic top 10 list, but my problem is that I have duplicate values, here's a sample:
[Code].....
I tried to use LARGE and INDEX to create a top ten list like this:
=LARGE(Names,ROW(1:10))
=INDEX(Names,MATCH(T2,Count,0),1)
But, when the list comes out, it shows only the first entry with a duplicate result:
[Code] ....
How I can get it to grab the second "Name" with the same value as the first?
View 6 Replies
View Related
May 6, 2008
I have a large list of items and have set up some dynamic drop down lists but need to know if/how to make these lists only show each item once and therefore ignore any duplicates.
View 9 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Oct 28, 2009
I am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
View 3 Replies
View Related
Sep 13, 2007
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
View 9 Replies
View Related
Jun 24, 2014
I'm supposed to find duplicates in sheet_1 Q6:Q251 and copy one of each to sheet_2 D6:D243 as well as unique values from the same column. In a sheet_1 B6:B251 I have values related to Q6:Q251 and I have to copy each of them to sheet_2, E6:I6 in the same row as the related duplicate (I'll have max 5 duplicates). You can find attached simple example of what should be the result (sheet_2)
View 7 Replies
View Related
Feb 17, 2009
I have two worksheets (sheet1(1687 rows), sheet2(767 rows)). Both have part numbers in Column A
I want to be able to search Column A for duplicates found in the other worksheet. When it finds those duplicates, iw oudl like for the Part Number(columnA) and the cost(column D) to be pasted onto a third worksheet (sheet 3)
I have found lots of similar things out there, but nothing that does what I want.
I will do this Each Monday morning. I am ok with VB but what takes me 3 weeks sometimes takes you guys 10 min.
View 4 Replies
View Related
Jan 3, 2010
Let's imagine I have many informations about 'Domains' such as Emails, phones, etc. My lists are long and it happens very often that I have the same domain (row) many times. No way to remember each time if I already filled the informations for this specific domain before.
THat's why I want to know if there is a way that ALL the informaitons on the Row of : Domain A will automatically be copied to another row where it will find another Domain A
The Conditional formatting (highlight duplicates) do part of the job by telling me where are the duplicates, but i need the other infos to be copied.
View 9 Replies
View Related
Apr 2, 2014
user of excel 2010.
I have a spread sheet with 2 columns that I have applied conditional formatting to to find duplicate values. So the duplicate cells are highlighted in red now.
Problem - I want to copy only those red cells to a new column in a new tab, and am having a devil of a time figuring out. Best case would be some sort of formula I could use on the new tab&column to do this.
View 1 Replies
View Related
Mar 7, 2014
What I'm trying to do is lookup a description matching the date on worksheet 1 cell (a2) and go to worksheet 2 and copy all descriptions associated with that date into worksheet 1 in cells b3:b6 (array may vary) without duplicates.
The date and descriptions relate to safety inspections and I am trying to include them in a report. The answer is important to me as well as the benefits to many others.
On Work Sheet 1 Looks Like
[Code] .....
View 2 Replies
View Related
Mar 12, 2014
I have one worksheet in my job named "Tudo" and there I have about 100 rules and the name of employees that need to follow these rules. What I need is the worksheet named "Nomes com Regras" show me in each name which rules is for each person.
View 2 Replies
View Related
Sep 10, 2008
I’m trying to do is identify duplicates in a LARGE column of numeric data. As a matter of fact, it’s about 112,000 rows which won’t fit on one spreadsheet since a spreadsheet can only handle 65,536 rows. So the caveats are that the information needing scanned for duplicates is all ONE body of data even though it is on 2 spreadsheets so I am not comparing one sheet of information to the other rather all 112,000 lines need checked for duplicates as a whole. Once duplicates are found I would like them to be highlighted in yellow on the original 2 worksheets but then also have the duplicates copied to a new sheet.
View 2 Replies
View Related
Nov 5, 2009
I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.
View 4 Replies
View Related
Jul 7, 2014
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
View 1 Replies
View Related
Mar 6, 2008
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
View 3 Replies
View Related
Dec 24, 2008
I currently have a spreadsheet that grabs data from 10 columns using vlookup.
This data is transferred to the new sheet in individual cells. (see attatched)
what i want to do is create a list from them cells, filtering out duplicates & counting them.
Creating a list like this:
720x560 = x5
452x282 = x3
etc.. etc...
I've tried everything i can think of, but i'm imagining that its a vba job to do what i'm asking.
I'd appreciated it of someone could point me in the right direction.
View 7 Replies
View Related
Apr 4, 2014
I have an excel table with several columns two of which I am interested in. What I am trying to do is filter the first column with a specific criterion and then copy the visible values from the other column into a range object. After that I need to remove duplicates. The problem is I get an error. Here's the code. There are a lot of duplicates.
[Code] ....
View 8 Replies
View Related
