while running the macro, how do you populated cell A1 of a different sheet without first seleting sheet the desired sheet. Example im on sheet 1 and iwant to move a value "TEST" to cell A1 of sheet3?
View 2 RepliesI am working a project where I need to copy/insert a Row of data onto Sheet 3 if values from Sheet2 are located on Sheet1. Here is my code so far:
Option Explicit
Sub move_rows()
Dim ws As Worksheet
Dim ws1 As Worksheet
[Code].....
How can i set the range for the Sheet3 i have taken IngDataColumn. It select only particular column of fixed that is 4
[Code] ....
I have been trying to work between Access and Excel and my forehead is getting bruised from the brick wall in front of my desk. I am finding Excel much more useful, but request some help with the final tasks.
Column1 of Sheet1 is an identifer. This number, in some cases is repeated which is necessary for when I include this data back into the master sheet. I make note of identifing this as 'text' as to not lose any zeros or go 'scientific'.
Column1 of Sheet2 is the same identifer but does not repeat (hence fewer rows). Column2 of Sheet2 is the city name which the identifer in Column1 is located.
I need Column1 Sheet1 repeated on Column1 Sheet3 and I need the respective city name from Column2 Sheet2 in Column2 Sheet3. Once I have this I can re-insert it into the master sheet.
The two areas I am trying to learn is if I am to use an If or a Findit, and secondly incorporating the multiple sheets.
I have attached a sample file.
Excel 2007
I try
With Sheet3
'Sub TF()
Dim i As Long
For i = 1 To Range("A" & Rows.Count).End(xlUp).Row
If Cells(i, 1).Value = 1 And UCase(Cells(i, 2)) = "Y" Then
Range("F1").Value = "GREEN"
End If: Next: End Sub
End With
To allow me to push my macro hotkey while im on sheet1 and have it run the macro thats on sheet3 but it does not work
I have a workbook that opens to sheet3 and in a cell on that sheet I would like to automatically show the last date entered from column A on sheet1 .
I have some code that shows the address in a message box but I'm so green when it comes to VBA that I don't know (yet) how to redirect the data in that address to a cell on sheet3
Dim LastDate As Range
Set LastDate = Range("A1").End(xlDown).Offset(0, 0)
MsgBox LastDate.Address
Find herewith attached file of xls... for my query..
Test.xlsx
I am moving data from Sheet2 to Sheet3.
View 5 Replies View RelatedI am trying to copy a range of valid cells "non-blank" from "sheet_a" ,"sheet_b" ,"sheet_c" to "sheet3" i was successful to copy from one sheet only. how to copy from all the sheets listed from the same workbook.
following is the VBA code i am using
Sub CopySample()
Dim shSrc As Worksheet
Dim shDst As Worksheet
[Code]....
I have this macro code in Sheet1 assigned to a button named Combination. I copied the whole sheet twice and moved to end. So they have the same data content and hopefully the macro in sheet1 will work as well in sheets2 and 3. But it's not. I just copied the code from VB codes Excel objects Sheet1 to Sheet2 and Sheet3. The cursor changed to a reading glass but it doesn't display any result. I am sure it's the worksheets(1).range part that needs to be edited but i am not sure if that is simply changing it to worksheets(2) or worksheets(3). I tried that also but no effect also.
Option Explicit
Public Sub ModelPricing_Template()
Dim a As Integer, b As Integer, c As Integer, d As Integer
Dim e As Integer, f As Integer, g As Integer
Worksheets(1).Range("a15:IV65536").ClearContents
[Code] ........
I have the following formula which returns the number of asset breaks for each head of dept in sheet3 based on their teams in Sheet1 and then does a countif in >30_DAYS_ASSET in sheet2. In sheet 1 is a mapping table with range names "Teams2", "Teams" & "Managers". I now need the formula to also do a count on the unique numbers in sheet2 Column B, if there are duplicate numbers then that will be 1 asset break, so for example for for Joe plummer we can see there are duplicate case numbers so the formula in total should return 2.
=SUMPRODUCT(--ISNUMBER(MATCH(Teams2,INDEX(Teams,MATCH(C11,Managers,0),0),0)),
COUNTIF('>30_DAYS_ASSET'!$B:$B,Teams2))
Sheet1
AB2ManagersTeams3JOE BLOGGSAMP14JOE PLUMMEREQADMIN567Teams28SECADMIN9AMP1
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
Sheet3
AB4Head of DeptASSETS5JOE BLOGGS286JOE PLUMMER3
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
Sheet2
AB6SourceCase No.7SECADMIN4498618SECADMIN4498619SECADMIN44991310AMP144986211AMP144918012AMP1550935
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
I have three columns (9, 10, & 11); text, currency, and text and I am trying to move them from seperate columns on Sheet2 to one column with forward slashes "/" between them on Sheet3. The attached code does this, however I lose the dollar sign and commas.
View 4 Replies View RelatedI'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
How can I change the font color or highlight cell A1, when I select cell A2. Cell A2 is still blank, no value entered yet. I also would like cell A1 to return to original font color or no hightlight when cell A2 is no longer selected (active), whether a value is entered or not in cell A2. Let me clearify, (A1 thru N1) and (A3 thru N3) have diferent dates and the font color is white, as is the cell too. Therefor you can not see the dates in (A1 thru N1) or (A3 thru N3).
However, when any cell (A2 thru N2) or (A4 thru N4) is selected (example A4), the cell above it (cell A3) changes font color or highlights, so the date can be seen in (A3). But when cell (A4) is no longer selected the above cell (A3) hides the date (changes back to white font on white cell). Data or a value is not necessarily entered into (A4) for (A3) to change. (A4) is only selected to show the date in (A3). But if data or value is entered into (A4), the date in (A3) will still be seen until (A4) is no longer selected/active.
how can i select the cell to the right in a macro? i want to runa command in the cell to the right of the one i'm in after a caommand has taken place there
i.e.
1st command run in col b following by selcting the col c and running another command there
I want to copy every other cell in a row that isn't blank to another sheet. I am able to copy every other cell by using
=INDEX(Sheet1!$A1:$J1,2* COLUMNS($A$1:A$1)-1)+1) f
From this thread, by specifying a very long range. But the problem with this is that cells in sheet2 are filled with zeros when sheet1 has empty cells. I have to export the excell file to csv, I don't wan't trailing zeros or ,,,.
I wish to use an InputBox to select one cell in a row and then insert an entire row at that position. What is the VBA code to do this?
View 2 Replies View RelatedI am sure this has been asked -and answered- before.
I need to select a cell, e.g. C1000, and change the view, so that I see C1000 on top of my spreadsheet.
range("C1000").select clearly does not accomplish what I want.
I currently have
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Target.Address = "$H$1:$K$1" Then
Call FINALIZED_BY_QC
End If
End Sub
In my sheet code. In a macro I have some code to unlock these cells
Code:
Range("$H$1:$K$1").Select
Selection.Locked = False
But the code is trying to select these cells and run the macro. At this point I just want to simply unlock the cells not select them...
I'm trying to select a cell in a range that matches the value in a combobox on my userform.
My combobox is populated during userform initialization with all the data in column A.
I want to select the cell that matches the combobox value.
I just want to grab the information in C1, then select cell E1, find next blank cell in that row and paste the information. It keeps giving me a runtime error on the line that tries to find the next empty cell.
Code:
Private Sub CommandButton1_Click()
Range("C1").Select
Selection.Copy
Range("E1").End(xlToRight).Offset(0, 1).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
I have been searching for a way to select the next blank cell in excel. I just cannot get my code to work. Here is what I have so far:
Windows("Maintenance MCS_BP_R2.xls").Activate
Application.CutCopyMode = False
Selection.Copy
Windows("Scorecard.xls").Activate
Range("C2").Select
Selection.End(xlDown).Select
ActiveCell.Offest(1, 0).Select
ActiveSheet.Paste
ActiveSheet.Paste
Application.CutCopyMode = False
Range("C6").Select
I want to paste into cell A1 of Sheet1, but without selecting that cell first. This code works, but it selects the cell:
Range("A1").Select
Sheet1.Paste Range("A1")
I've tried different variations such as:
Sheet1.Range("A1").Paste Range("A1")
or
Sheet1.Range("A1").Paste
but they result in errors.
This should be so simple (I would have thought), but so far I'm struggling.
Using Range / Offset or something similar, I want my macro to select a certain cell (which is dependent on the data in another cell) on my worksheet so that the user can then input data into the chosen cell.
Something along the lines of:
Range("A1").Offset(23 + t4, 1).Select
[where cell t4 contains a number which dictates how many lines down I want it to jump]
My data I need to copy begins as always from cell A5 and keeps going till A16.
I need to copy this data but only from A5 to A15. I always delete the last cell.
The number of rows is not always the same. Sometimes my data runs till A26.
How can I copy this data except the last row?