Im trying to count the number of time a Value is in a multi sheet Range
the formula
=COUNTIF(rangename,Value or cell ref to count)
or
=COUNTIF(SKULIST,A2)
Works if my range "SKULIST" is on a single sheet but returns #VALUE! error if its a multi sheet range
I am trying to copy a range of valid cells "non-blank" from "sheet_a" ,"sheet_b" ,"sheet_c" to "sheet3" i was successful to copy from one sheet only. how to copy from all the sheets listed from the same workbook.
following is the VBA code i am using
Sub CopySample()
Dim shSrc As Worksheet
Dim shDst As Worksheet
[Code]....
I am trying to have excel Look in column A for either a date, or a date range. if the date = the correct date, or falls in the date range then I need excel to look in column C for a specific word. If the date matches, AND it finds the word in column C, I need it to count them. I preferably like a date range, but if I need to do each individual date, that is fine too.
Example:
8/1/2009
Video
Account Research 8/1/2009
Video
Complete Work Order 8/1/2009
Video
Account Research 8/1/2009
Video
Account Research 8/1/2009
Video
Complete Work Order
I need it to recognize 8/1/2009, and once it sees it, then check to see if there are any "account research" in column C, and then count all of them.
One more issue - Column is not just a date - it has a time stamp: 8/1/2009 11:15:36 AM. so I has to be able to just look for the date, not the time.
Enter Data To Multi Sheet Through Userform. How can I enter Data from entryform to multisheet?
View 6 Replies View RelatedI have a sheet that has to look up value on a report from a sheet sheet that has more than value. Ex)
On the report I have values 123A and 1234A
On the data tab I have table that has.
Ref Tot Value Desc Value1 Value2 Value3
1 123A Widgets 1 2 3
2 123A Widgets 4 5 6
Ref Tot Value Desc Value1 Value2 Value3
1 123B Nuts 7 8 9
5 123B Nuts 1 3 5
Ref Tot Value Desc Value1 Value2 Value3
7 1234A Bolts 2 4 6
11 1234A Bolts 3 5 8
So the report need find the values for Value 1, 2, 3 on where the value matches the data tab.
Currently i am using below formula to get the data from Sheet 'Dec,11'
I have sheets from Jan,11 till Dec,11 and I would like to give a cell reference A1 where I will enter the Sheet name and I should get the data of that sheet.
=COUNTIFS('DEC,11'!$AH$6:$AH$4457,$BE$5,'DEC,11'!$T$6:$T$4457,A6)
Actually I tried entering like this
=COUNTIFS('A1'!$AH$6:$AH$4457,$BE$5,'A1'!$T$6:$T$4457,A6)
But its not working.
In column A I have a list if places that can contain duplicates ie
Manchester
Birmingham
London
Birmingham
London
Manchester
Manchester
London
In column B through to D a list of statements to which there are multiple answers i.e.
Yes / Maybe / No
What I'd like to know is how many 'Yes' answers are in the data range for column B:D in Manchester
I've used a countifs but have to result to multiple countifs adding each column together which is fine for 3 columns but not when there are 50!
Excel 2007.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday
Dig
Drive
Dave
4
5
Bill
2
7
Tuesday
Dig
Drive
Dave
2
7
Bill
8
1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig
Drive
Dave
6
12
Bill
10
8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row
Column
Value
Bill
Dig
2
Bill
Dig
8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
i have a main.xls file and two data file dat1.xls and dat2.xls
mail named file have ar - br- cr- dr- er -fr sheets
dat1 named file have ar-br-cr sheets
dat2 named file have dr-er-fr sheets
and all this files data source is
colomn source a - fd
row source 29-4000
i want to make two commandbutton to main file first for dat1 second for dat2 file and i need a code to use at this buttons to make
when dat1 and dat2 close
main file user when click first button
copy dat1 file ar sheet colomn source a - fd row source 29-4000 cells to main file ar sheet colomn source a - fd row source 29-4000 cells
copy dat1 file br sheet colomn source a - fd row source 29-4000 cells to main file br sheet colomn source a - fd row source 29-4000 cells
copy dat1 file cr sheet colomn source a - fd row source 29-4000 cells to main file cr sheet colomn source a - fd row source 29-4000 cells
Ive created a pivot table which looks at an Access Database in the form of a Cube. One field has numbers in, but when it comes through as a cube, it treats these numbers as text. So when I have a the rows as this field, they appear in text order, eg. 1, 10, 100, 101, 2 etc (instead of 1,2, 3, 4 etc). How can I get this field to be recognised as a number field in the pivot? (its a number field in the access database). Ive applied a sort to the data where Ive made my own custom list, but this is just a temporary fix. Can i specifiy somewhere that this field is a number and should be treated as such??
View 3 Replies View RelatedTrying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
Is it possible to get the current Page Item Selected for a pivot table
I've tried the following functions in VBA, but have had no success
CurrentPageName
CurrentPage
CurrentPageItem
ParentItems
I use Excel to query a SSAS OLAP Cube, the return of which I then model into various outputs. I do not have access to amend the cube.
I am hoping it is possible to be able to add custom calculated members to some dimensions in excel rather than on the server, but I'm struggling to find any resources that explains how it is done or if it is even possible. For example, the cube will return the dimension 'Source Country' with members 'England', 'Northern Ireland', 'Scotland', 'Wales', I would like to add a calculated member 'United Kingdom' to consolidate all those members.
Is this possible or should I just look to calculate this consolidation by formulas in the model.
Excel 2007
Win7 Pro
I know that there is an easier and shorter way of doing this;
View 6 Replies View Relatedmulti cell sheet name rewrite this code as it fails at the
View 2 Replies View RelatedActually i am going to be mad soon if i cant fnd a solution. I need help on a subject.
i have many sheets, more than 200 in a workbook. Each sheet is eaxctly same format and just the numbers are different.
lets say
sheet 1
A1- Manchester
A2- London
A3- Leeds
sheet 2
A1 - Istanbul
A2 - Ankara
A3 - Izmir
I want in sheet3 with a macro, when i put the sheet number in a cell, next cell will show A123.
I mean;
sheet 3
when i put A1 as "sheet 1" i want the text in A2 written "Machester; london; leeds"
or if A1 is "sheet 2" than A2 should write "Istanbul; Ankara; Izmir"
I made a 12 month calender made by first sheet how can I copy the first sheet to all 11 sheets with all the formulas included.
View 4 Replies View RelatedI have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
I have a macro that selects and copies and pastes a range of data from one sheet to another sheet. It works perfectly except it is pasting all the cell formatting and formulas and i only want or need the values.
View 8 Replies View RelatedI have a Workbook containing seven or eight Worksheets. The first Worksheet is a data entry and options selection sheet displaying a selection of Textboxes, Option buttons, Combo boxes etc, the second sheet contains reference data, following these are a number of Worksheets that are calculated and filtered as a result of those options and inputs. A 'print' button on the input Worksheet then runs a Procedure that applies the relevant filters, assigns print areas and prints out the 4 or 5 filtered worksheets. I now want to expand this Procedure to take a copy of just these filtered Worksheets and save them as another Workbook (values only) for subsequent free editting.
I have started by selecting the relevant cells on the first filtered Worksheet, copying, opening a new Workbook, renaming the first Worksheet to match the one I'm copying, PasteSpecial formats, PasteSpecial the values, go back to the original Workbook, select the relevant cells on the next Worksheet, copying, opening the new Workbook, renaming the Worksheet etc etc. Now this seems to be a very labour intensive approach and I'm wondering if there is an easier way and how to do it. Ideally something like... taking a copy of the whole Workbook somehow changing all the cells to values only, rather than formulars then deleting the first two Worksheets (input and data ones).
vba code to find multi values in a Sheet With 6 columns values like :1,3, 12,16, 20 ,31, 36, 44, 46,
View 2 Replies View RelatedI'm trying to create a formula that looks for matches in 3 ranges and exports a specific value dependent on if there is a match or not into a new cell.
IE:
If any value in Column A = D1 AND any value in Column B = E2 then enter corresponding value from Column C into F2, if not then place "New Data" in F2.
If it makes it easier to conceptualize: Columns A,B,C are in one worksheet. Columns D,E,F are in another worksheet.
Worksheet 1
Column A Column B Column C
1 Frog Eye Head
2 Rabbit Eye Head
3 Cat Nose Head
4 Horse FR Hoof Leg
5 Dog Nose Head
Worksheet 2
Column A Column B Column C
1 Horse Eye "New Data" (no match from column A or B)
2 Cat Nose Head
3 Dog Nose Head
4 Rabbbit FR Paw "New Data"
5 Horse FR Hoof Leg
I need a Formula for Worksheet 2, Column C that searches Worksheet 1 Columns A & B and places the corresponding match from Column C (if there is a match).
I've tried Lookup and IF/AND formulas to no avail.
I need to be able to auto fill, on sheet two,cell references for every 26th entry. Below is an example of what I would like it to be able to do with the drag, auto fill.
View 8 Replies View RelatedI have a chart:
ABCDE126143199167233153143310351018220110246817085151581166230162692149206173711417214213281273781662029132178200255
I need a formula to find the maximum value in C1:E9 and return the corresponding number in column A. In this instance, the answer would be 12. I've been trying to make it work with a combination of Offset and Max formulas, but since the maximum could be in any one of three columns, I don't know how to make it work.
I searched and found a few posts about transposing arrays into a range of cells, but none of them seemed to solve my problem. So, my problem is, I have a .Net assembly which provides various functions to allow Excel to access our Oracle DB stored procedures/tables, etc. This assembly is exposed via COM Interop. I call the GetSPINTypes() method, which returns me a list of type pairs (ID, Name), in a CSV string format.
I split the CSV into rows, and then put each row into a 2-dimensional array.
I then need to dump that array into one of my sheets in Excel, so I try to do the usual Range.Value = Array, but this sometimes tells me there is a type mismatch, and most times just doesn't fill the range. I've checked my arrays in the watch window, and they have definitely been filled in correctly, the values just don't appear when they are put into the sheet. See the code I'm using below:......
I have numbers in a range over an indeterminate number of rows and 6 columns. I want to create a single column of the numbers with no blank cells in between. It's to check Visa receipts from different depts.
View 2 Replies View RelatedI have mananged to find and tweak the following code in order to serve my copy / paste to master sheet requirements.
At the bottom of the code I have added a delete rows based on column contents routine although I'm not sure if it is actually the right one to use.
I have included it in the same module in order to tidy up the whole process and have it all operate under one click.
As stated on the sheet in this exmple, The paste could consist of any number of sheets although the range is always the same on each sheet. (only amounting to around 20 rows that we are dealing with so no reams of data with odd empty rows that would take an age to find otherwise).
The data can look like it does on Sheet 2 here and also could look like it does on sheet 3. (this data is coming from a sales rep's order sheet)
From the routine in module 1, I just don't know where an "add an empty row" or delete all empty rows bar 1" code would need to be inserted in order to keep the process going until all sheets are copied.
I'm aware that with the delete code at the bottom, the whole copy process is completing before the delete process then does it's bit so think I'm on the right track in thinking that the delete all empty rows but leave one" requirements needs to be further up the code but I just don't how to get the result I need or where that code should break into the routine.
The only other way I can think to acheive the result is to allow the range to increase by 1 row on the form but somehow make sure that the last row in the range contains a character in column B to "trick/force" the delete routine to leave that row in. That would be do-able but the trouble is, how do you get a value into a cell that the delete proces would treat as data but not be visible so keeping my spacer line tidy? I've tried just putting a space in the last row of the range in column B but the row still gets deleted.
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
I have multiple rows within a cell separated by Alt+Enter, and would like to combine them as follows:
Desired Result
First
First
Name
Name
First Name
First Name
I have a large table in the final tab of my excel book. This table contains data such as Company name, contact details, etc but also a date which I must contact them on (this is nothing sinister, just a curtsy call following a job ).
The problem I am having is that I am running a vlookup on the first tab on a cell referring to todays date. This only brings shows one record which is the first occurrence of this date. This isn't very useful to me
The problems I need solving are:
I would like to be able to vlookup a range of dates (i.e. 7 days before or after todays date) - how do it do this?
I would also like to be able to return multiple results (i.e. if there is more than one company within that date range I would like them to show).