let say i have in Sheet1 colomn A a list of names, i want to select the names and copy them to a second sheet (Sheet2) base on the below criteria
in Sheet2 the first name should be in B3 and second name in E3 the third name in B23 the fourth name in E23 the fifth name in B43 and so on .
I am working on a macro and this section has me stumped. The worksheet columns are A:AE. Occasionally, the procedure needs to select a varying number of cells in a row which don't always fall in the same column, count the number of cells in the selection and then paste the data on the row above it, in column ("AE" minus the Selection Count).
Here is what I have so far:
[Code] .....
The red-bold bracketed code is the syntax I'm not able to figure out how to phrase.
If a user selects certain options from a drop down list created by cell verification (from list), is it possible to display an input box and have the resulting input populate on another worksheet in the workbook? I have an attendance template I'm working with and if a user selects OT (Over Time) then a input box is displayed prompting for how many hours. The overtime is then tracked on another worksheet.
View 1 Replies View RelatedI have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
I want to have a drop down list in a cell so that the value in the cell can be only selected from two columns of data. Additionally once the data from the first column has been selected I want to be able to limit the inputs the user can select from in the second column.
e.g. In cell C115 I want to have the value BDS05.
I want to be able to select the value BDS from a drop down list of values and once that value has been selected I want to be able select 05 from a list of values from 01 to 14
If I select BCS as the first value then I want the second set of values to be limited to 01 to 02 etc.
I have read about combo boxes and list boxes and I'm a bit confused about the best way to achieve this (or even if I can).
I'm looking for a formula that will take the cells used as a heading and place them cell into columns with the corresponding rows under the heading.
I'm thinking that the formula will have an offset that counts the blank cells in column A then place the text from the heading cells (by heading cells I mean the ones that say "Type A" and "Code X") next to the rows with the products.
Maybe a VBA script? What do you think?
I want to use offset in a macro based on a callvalue. for example I have
200 in 'A1'
25 in 'B1'
current selected cell is 'C1'. I want to go 8 (200/25) cells down. something like offset(A1/B1,0).
I have three columns of Data. A is vehicle number, B is miles and C is a Date. I want to be able to pull the miles for the newest date when the user types in a bus number next to the formula. I think It can be done with an array formula but I am not 100% sure on how to do it. Also is it possible if they enter a vehicle number and a date that a different formula finds the miles for the most recent date to the date entered.
Excel Help.JPG
I want to have a variable range.
ie. This value M4 needs to change based on the week.
Range("M4").Select
If it's week 1, then it can be say M4, but week two will need data to go to N4.
I have found out how to get the week number from the user. ie.
' Select Week Number
Dim NumSheets As Integer
Dim Prompt As String
Dim Caption As String
Dim DefValue As Integer
Prompt = "What week do you want to get data for?"
Caption = "Week Number"
DefValue = 1
NumSheets = Val(InputBox(Prompt, Caption, DefValue))
If NumSheets > 52 Then MsgBox "Week Number too high"
If NumSheets < 1 Then MsgBox "Week Number too low"
I tried then linking this value saved as NumSheets by:
Dim Rng As Range
If NumSheets = 1 Then Rng = Range("D3")
If NumSheets = 2 Then Rng = Range("E3")
What I have:
I have 12 months in a year and each number represent a month. I have generated lists of data mainly interest and principle payments from 12 amortization sheets which i have just copied into the attached spreadsheet and will change accordingly based on the loan terms which doesn concern us. For our purposes we wont make distintion between principle and payment as i just need to see how to make what i need work.
What I need:
I need to offset data vertically automatically once i the user selects an option value (Number in this Case) from the validation list located within the Payment control box. Going from left to right you see the raw data but in this example i need the data on the right hand side to be offset down the number of rows which may be found in the control box as a validation list.
IE:
So if i were to use "Loan I" [L6] and select a "2"[J6] from the "Payment Control" then the data on the right hand side [L6[ would reflect a $0 but instead the new value for L7 would be "$24.96" and would continue down for about 374 rows. This will have to be done for Loans I - Loans N [L6:Q6] respectively. This is all i need in order to compile and make use of in my spreadsheets.
Thanks and cannot be a formula as forumlas will be overwritten and cannot be a macro so it must be a module in itself so it an run when the list is changed.
the single digit values in coulmns M6:Q3 are there mainly so you can see the difference between the base and the position at which the data is placed at. its not need but is there to stress and to show the number rows in offset of data.
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
I am trying to paste data into cells that are offset from specific data in my excel sheet.
The code I've got so far is:
[Code] ....
What I am aiming for is to search my Columns G and H that contain the values 1 & 1. Then from the cells that contain those variables, move 2 row up and 7 columns to the left and then paste on that active cell.
I am completely new to VBA so im sure there plenty wrong with this VBA script but so far ive managed to paste the data but it just pastes across the whole row instead of just the cells ive copied.. now i just get errors on the script.
I'm trying to make a simple chart with VBA based on a row with values that will color the offset cell interior red and also give it a value of 1. (look a the example sheet.)
View 4 Replies View Related- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
I have attached a sample excel sheet.
I want data to appear on sheet 2 from B10 onwards based on month selection and removing duplicate entries and sorting in ascending order
When no data is found to display message box "data not found"
I have multiple files in one directory. I have a master sheet that gives me basic information about all those files. In column K it list's all the file names and file paths. I would like to be able to use the auto filter to sort these files. Once the files are sorted they are opened and the relevant information (the CHRD page) is then copied into the master (Query.xls) the first copied page is renamed to sheet1 and second to sheet2 etc. Right now i have to manually run the macro's depending on which line the files are listed. I have also had to create separate macro's for each line.
View 2 Replies View RelatedI have a worksheet where I have restricted the users from scrolling around beyond a certain range.
Because of that the user is prevented from selecting an entire row.
There are some cases where the user should be able to delete entire row or range of rows.
How can I allow them to select say cells "C17:C35" [they would just hoghlight the range] and hit ctrl+d; which would trigger a macro and the macro in turn would delete all the rows in that selection [rows 17 through 35]?
I know some basic codes for deleting entire rows, but I don't know how to read first and last row of the selection under Target property.
I have been able to put together the below which generates a random 15% sample of all records in the worksheet.
It works perfectly, however what I would ideally like to do is get it to only produce the 15% sample of rows where it is todays date in col B and has the word "other" in col C. I've tried lots of different IF statements and FOR statements, but am only generating blank worksheets.
Sub getrandomrows()
Dim lr As Long, lc As Integer, a As Variant, MyDate As Date
lr = Cells.Find("*", LookIn:=xlValues, after:=[a1], searchorder:=xlByRows, _
[Code].....
I have a drop-down list with 3 values:
A
B
C
The list is generated from a table, which is hidden, like so:
Column 1 - Column 2
A - Text1
B - Text2
C - Text3
Now I want to have a very simple function that will allow me to COPY the text from Column 2 based on the selection from the drop-down list. For example, when the user selects "B" from the drop-down list, I want the text "Text2" to be copied to a specific cell.
I have a input selection, when i keyin XYZ, the data under column XYZ should be ranked in ascending order. If i select ABC then it should rank ABC data in ascending order.
XYZ
ABC
Input--->XYZ
XYZABC
15
38
26
42
Rank the column by selectionXYZABC
I have a worksheet that lists the months of the year on row 3 from columns C through N.
What I am trying to do is to be able to select the month I want from a drop down list or combobox and then hide the remaining columns based on the selection. For example if JAN is selected the months FEB through to DEC would be hidden.
Here is my
ThisWorkbook.sheets("sheet1").Range("M").Select
For Each cell In Selection
If cell.Value = ThisWorkbook.Sheets("Sheet2").Range("A").Value Then
cell.EntireRow.Delete
End If
Next cell
Range("a1").Select
End Sub
I want to remove all rows in sheet 1 that contain any value found in Sheet2 A I using XL 2003.
I have a dashboard that uses three pivots based off of a single data source. Each of the pivots is designed to work off of their own drop down list.
the first drop down list allows the user to select a lease date. The associated pivot will update with all servers assocated with that lease date.
the second drop down list allows the user to select a server. This list is limited by the lease date selected in the first drop down. The associated pivot will update with the partition information for the server selected in the drop down.
the third drop down list allows the user to select a partition. This list is limited by the server selected in the second drop down. The associated pivot will update with the detailed partition data for the partition selected in the drop down.
All of the above works, the issue is that when a new lease date is selected in the first drop down list, the current entries for the second and third drop down list are still reflecting the old lease date information. When you click the drop down the correct data is there, it is just not automatically populated.
Is there a way that when the user selects a new lease date in drop down one, the first server in the new list is automatically populated in the second drop down as well as the first partition in the third drop down?
I have a problem involving two combo boxes in a user form.
I need to populate different “lists” to combo 2, based on a selection in combo 1.
I browsed through the forum but could not find any solution that made sense to me.
Here are the specifics:
Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).
This list is loaded as part of the form initialization.
If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).
I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.
can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box
I'm trying to write code that will allow Options>View - Zero Values.", "style="background: #FFFFFF;padding: 2px;font-size: 10px;width: 550px;"");' onmouseout='GAL_hidepopup();'>formatting.htm" target="_blank">conditional formatting using 5 conditions. I have the following:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:G10")) Is Nothing Then
Select Case Target
Case Is <= -9
icolor = 4
Case -8.9999999 To 8.999999999
icolor = 6
Case Is >= 9
icolor = 3
End Select
Target.Interior.ColorIndex = icolor
End If
If Not Intersect(Target, Range("A1:G10")) Is Nothing Then...............
The problem is I need to apply this formatting to a large chunk of cells that are already in a worksheet - or to be able to copy the cells into a new worksheet to be formatted alll in one go. Obviously I need to use something other than worksheet change in the code, but I don't know what....
Create a random selection based on odds. It would be similar to the RANDBETWEEN function, but in this case I specifically want one of the three values to be selected randomly in cell C2 based on the odds given.
View 9 Replies View RelatedI want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
View 4 Replies View RelatedI am working on a form in VB and have a combobox and three monthviews. My question is when a user selects a specific item from the combobox (ex. terminal illness), I want one my monthviews to disable.
View 4 Replies View Relatedif is possible to make some kind of ComboBox without filters, I mean that let you choose different items at the same time. I do not know if some of you have seen some "ComboBox" that has all the options in one side and next to this window it has a blank window that when you double click the word that was in the other wondow passes to the other window telling you that you have chossen this item.
View 6 Replies View Related
