I have an extract of sample data in columns A to E in the attached file.
I would like to create some VBA code to copy across to columns H to K the data in A to D that has that is flagged as "Y" in column E, sorted in descending order of the values in column D. When there is an "n/a" in column D the products should be sorted in ascending order of the product name. I have shown the desired outcome in H2:K6.
I have data in columns A and B.
If the data is in column A it will not be in column B.
My objective is to move the data in column A to column B, as long as it is not a number with the color yellow in the cell.
The data displays as follows:
**SPECIAL NOTE: Cells with 34407211756830 and 34407212013659 have yellow cells.
Column A Column B
34407211756830 000 Staples IV
RC 636
I have 2 reference cells with the date range to look for in C1 and D2.
G2 through IV2 have dates that run across.
I would like for the macro to look for the start and end dates in C1 & D2 and paste the new data as values from A1:B20 into those particular columns of dates within the range.
ABCD1head count23start7/1/092vac%5%end7/15/093iap%3%4misc%3%5off%21%6% ot0%7off%21%8% ot0%9rpr wk rt1.510inst wk rt5.0211go back %5%12nw Mvr %3%13fall out %10%14jep/incomplete %16%15lines in service116% esc3%17% change610%18churn rate60.994%19report rate0.297%20% of market2218%
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
HTML Code:
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
Range Pear
A B C D E
4 1 3 5
5 1 1 1
6 2
7 2 2
8 5 7
Range Apple
A B C D E
1 2 2 4 3
2 1 3 5
3 4 6 9
4 5 3 1 3
5 7 7 7 6
How would you prevent the copy/paste of cells that have comments?
Also, how would you allow cells with comments to be copied and pasted without pasting the comments?
I also have an aside question about the forum advanced search. When searching for multiple search words, how would you type the search to include all words, for example, "prevent" & "paste" & "comments".
I had attached the excel sheet below. I need to have a macro which will be able to help me to deliver the result ( as attached) as per the raw data (as attached ).I have been cracking my head as there are more than 1000 item for me to be sorted by me daily and several reports with almost the same issue.
description-i will need worksheets to be created for each of the available status on the report and have all the details to be pasted accordingly to the status.this is meant for excel 2003.
I am attempting to come up with code to copy a row only if columns K:Z are all blank in a row.
I tried using thirteen if statements (it was a messy code) and then using a search code with a For/Next statement and none of them are working. They copy the rows but something keeps bugging no matter how I change them.
Im making a timeplan for projects in our company. Each Sheet is for one month.
So long I only found macros for copying rows if checkbox is true, but without the date condition.
In cell C2 I have the current date shown with today() formula
On the end of the month for example on Sheet called "May" I want that
all rows witch are unchecked that means unfinished (H6;H50 are checkboxes)
are copied to the next Sheet "Juny". This must happen only once a month (on the first day of next month). Example: On Sheet "May" this macro should be run only on 1st of Juny.
The rows should be copied without spaces between rows (if rows 6 and 8 are unfinished in Sheet "May" the next Sheet "Juny" should contain this rows in line 6 and 7).
I'm trying to code a clean up of some data ranges ready for priting / reporting. I need to move filtered data from the source sheet, to a new one.
The issue is, that I need to apply some logic to the rows I filter out, not something I can do with autofilter...
- Only copy rows including and BETWEEN the first and last rows where total count in col 8 is > 0
So in example1, I'd want to copy out rows P6 - 1A
BUT
- Always copy at least 5 rows when there is one value > 0 in col 8
So in example2, I'd want to copy out rows P5 - 1C, ideally...
Total
Boys
Girls
Total
[Code]....
I have this macro to copy a range to another worksheet:
Sub transpose_UPCID() ' Hace el copy y paste transposed en BAUCS de los numeros de UPC"s y
' las cajas ATR
Dim rng1 As Range
Dim rng2 As Range
Set rng1 = Sheets("Sales-Inventory").Range("UPC", Range("MK_ID").End(xlDown))
Set rng2 = Sheets("Sales-Inventory").Range("Figure", Range("Figure").End(xlDown))
rng1.Copy
Sheets("BAUCS").Range("C11").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
rng2.Copy
Sheets("BAUCS").Range("C37").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
Application.CutCopyMode = True
End Sub
The only problem is that this code copies all the items and I need this code to look into Column A in the Sales-Inventory worksheet. There I have a data validation with a total of six options. I also have six differents worksheets where I need to copy the values based on that data validation. To give you and example, all items containing XX in column A copy to XX worksheet. Something like that.
I have 2 worksheets (X and Y) and am trying to write a macro/vba to copy certain cell values from a row if that row has a marked cell. For example, on sheet X, marked cell is column P and when P = "Y", then values from cells B, D, I, J, L need to be copied to sheet Y.
Sheet Y has multiple rows and the values from X need to be copied into appropriate rows. B from X goes into A from Y, D into B, I and J into C, etc.
Im not sure how to go about this other than have every cell copied and then filtering sheet Y. But Id like to have a macro only copy marked rows and appropriate cell values (some contain formulas) as the data is constantly changing and sheetY has to be printed up.
We are trying to list only certain cells that have a specific conditional format- this is so we can copy them to another sheet
A filter does not really work for us since we have over 5 columns to search on and over 800 records
This is how excel says to find cells that have a conditional formatting (for example the scores are red because the student scored between 350 and 370: I tried it and it doesn't work--but maybe that is not how it is suppose to work?
To find cells that have conditional formatting settings identical to the settings of a specific cell, click the specific cell.
On the Edit menu, click Go To.
Click Special.
Click Conditional formats.
Do one of the following:
To find cells with any conditional formatting, click All below Data validation.
To find cells with identical conditional formats, click Same below Data validation.
Im trying to copy data that meets a certain criteria from a list on one sheet to another. The problem with the code i've written is that i can't get the loop to work. Once it finds one example it copies it but then stops. My code is as follows:
Private Sub Find_Ammendments_Click_Click()
Dim RowCounter As Integer, RowCounter2 As Integer, RowRange As String
RowCounter = 1
Sheets("PINTS & BOTTLES").Select
Range("Start_pb").Select
While ActiveCell.Offset(RowCounter, 0) <> ""
RowRange = ActiveCell.Offset(RowCounter, 0).Address & ":" & ActiveCell.Offset(RowCounter, 8).Address
If ActiveCell.Offset(RowCounter, 5) >= ActiveCell.Offset(RowCounter, 10) Then......................
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information.
I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information.
i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281.
It falls over on the very last line of code I can see A5281 selected but it won't paste....
I have a sheet of data (Sheet1 below) running into almost 1000 rows. Each month, I get an updated sheet (Sheet2) which has overlapping data with sheet1 (rows starting with N, O, P, Q), new data (rows starting with R, S) and data present in Sheet1 but not in Sheet2 (row starting with M in Sheet1). The columns "Item" and "Quantity" in sheet1 are populated by me and are blank in sheet2. The table below explains the structure.
Sheet1
Name
ID
Date
Item
Quantity
M
231
14/03/2001
egg
5
[Code] .......
It gets tedious to update Sheet2 every month. Is it possible to merge the 2 sheets into a Sheet3 (like below) if Name, ID, Date in each row is an exact match?
Sheet3
Name
ID
Date
Item
Quantity
M
231
14/03/2001
egg
5
[Code] ........
Further, it will make my job much easier, if it was possible to identify rows only present in Sheet1 and add a tag "absent in new" in a new columnidentify rows only present in Sheet2 and add a tag "new" in the new columnidentify rows with matching data in Name, ID, Date in Sheet1 and Sheet2 and add a tag "current" in the new column.
Something like the table below:
Sheet3 (Desirable)
Name
ID
Date
Item
Quantity
Comments
M
231
14/03/2001
egg
5
Absent in New
[Code] ...
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I've received an Excel file with the below macro. However, I've made changes in the original file and therefore, the macro isn't working anymore except if I copy paste special the value instead of simply copying it. I would need to change the macro accordingly.
The macro is the following :
Sub CCtosheetwithoutformat()
'
' CCtosheetwithoutformat Macro
[Code]....
I would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
View 2 Replies View RelatedI currently have a macro that outputs data to a bulletin-board type table in my worksheet. At the moment, what happens is that the macro copies the entire table down one row using copy/paste, then prints a new line of data to the top row of the table.
This works great because it is very fast and because I only have to format each line once--the formats just get copied down every time a new line of data is added.
My problem is that while this program is running, I am unable to use copy and paste in windows, because the copy/pasting from the macro overwrites the windows clipboard.
Is there a way for me to "copy" formats from 1 range to another range of equal size without actually using copy/paste? I know this can be done with values (eg. range("B2:B4").value = range("A2:A4").value), but I can't get it to work with any sort of formatting.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
View 3 Replies View Relatedwhat is wrong in this code, it does not paste.
HTML Range("A65536").End(xlUp).Offset(0, 0).Select
ActiveCell.Offset(-1, 7).Select
ActiveCell.Copy Destination:=ActiveCell.FormulaR1C1 = "=(R[1])"
I am trying to copy from the selected cell and paste one cell below(next row) in same column.
I have a list of invoice #'s on a sheet named "Temp Sheet".
I have a VBA macro that created a new tab for each entry and named it the invoice #. So basically the vba code created a new tab ( based on the number of invoice #'s on my list ), and named each tab an invoice number. So if I had a list of 10 invoice #'s, named S1-S10, the vba code created 10 tabs, named S-1, S-2,. S-3.....
Now to my question.
I have a template sheet I want to copy from ( "Template" ), and select any sheet that starts with "S", and copy/paste this template to.
I need a macro code that when the button1 is pressed, it will ask for a range or it will capture a range, when the range is identified, the range value will be copied and pasted to the next available line/row when I click button2.
In this sample I select the range columnA and columnB
Column1
Column2
row1
Apple
Ball
[Code] .......
When I press the button2 to copy/paste the table should be:
Column1
Column2
row1
Apple
Ball
[Code] .......
It is like Duplicating a selected range.