VBA To Find Cell Value In Column And Count Occurrences In Same Row Within Date Range?

Feb 3, 2014

I would like to design a macro that can find a value within a cell in a colunm and copy a value in the row then count occurances of that value next time a match in the colunm is found on a different row, but also do this only if the date range in the row is within a specified range. So a multi-critieria search and copy operation.

To explain a little better here is a simplified example of my spread sheet that is in input for the macro.

A
B
C
D
E

1
PART NO.
date in
date out
comp1
comp2[code]......

Column A lists the coponents found on the same row as the seach critria, in this example "12-3".

Column B lists the number of occurances of the components. This search is limited to a date range input by the user.

So what I can see is the components replaced and the amount of times replaced on a specific item over a fixed time.

*It is difficult to describe this problem without showing the macro output, but this is just an example for the purpose of explanation.

I know a bit of VBA programming and initially I started with an input box that asks for the part number and limit dates.

I have a very large range of text; g2:g23000. I am trying to find the number of times ABC shows up in this range and provide a count. The cells contain all bits of information, but i am only looking for ABC.

Col A contains a list of random dates going back 1 year in this format 12-Oct-11. These dates are the dates of events. The events are coded into 5 areas in col B with a,b,c,d & e representing each typy of event.

I would like to look at the last 3 months of data taken from Col A and count how many events occured in that time period.

I need to count the number of occurrences of a range of dates in one column. These are not unique dates, but dates between two date periods i.e. number of dates falling between 02/07/07 and 09/07/07. I have tried using the COUNTIFS function and inserting the column range (e.g. B7-B57) and then searching for dates <=02/07/07. However, what I need is to search for the number of times any date in a given period occurs i.e. number of 03/07/07s in a period from 02/07/07 to 09/07/07.

I am needing to count the number of calls in a call center between certain hours by date. Column A is the date, Column B is the time of the call. I am needing to know how many calls occurred on X date between the hours of y and z. I have tried various forms of the countif and sumproduct but can't seem to get any of them to work for me. Here is the graph I am trying to populate:

I have a table of values, each of which can occur multiple times on multiple rows. I need to figure out the maximum number of times a specific value appears in a row. I could do it quite easily with VBA, running countif on each row and tracking the maximum, but I would like to do it with builtin formulae if at all possibl

In need checking if a particular ID number is repeated more than once in column B. I need to write a formula in each cells of "No.of Repetition" column or Column C to check if respective ID number in column B is repeated more than once and display the count or display a condition true or false.

how to count the unique occurrences in column A based on the value in column B. In the example below, I am trying to count the number of unique names in each state (Illinois=1, Colorado=2, New York=2). I would like the formula to count unique occurrences for the entire column A because I will be adding to the list.

..A.............B............C John......Illinois John.....Illinois John.....Colorado Alex.....Colorado Alex.....New York Steve...New York Steve...New York

I am assessing the impact of product price increases on volume (qty) and sales (£/$).

The prices are changed sporadically and at no set intervals. For example pries were changed on the 15th Jan and 13th Feb this year.

We have set reporting dates (calender months) so i am hoping to be able to divide the report which shows sales & qty's during the 15th Jan - 13th Feb segment and apportion them to the correct months.

I have the start & end dates of the calender months in cells A4:B18 and each time a new report is run (ie 15th Jan or 13th Feb, these dates go across the top i.e. cell C3 = 15th jan & D3 = 13th Feb.

I would like to return a % in cell C4 which relates to the amount of total days in the segment that relate to Jan (ie. 29 days in the segment, 16 relate to Jan so 55.2%).

Cell C5 would then return a % which relates to the amount of total days in the segment that relate to Feb (29 days in the segment, 13 relate to Feb so 44.8%).

Cells D4&D5 would return the next reporting segment and how many days in Jan/Feb respectively (the answer will be 0 but a constant formula acrosss all would be perfect. tried to give as much info as poss.

I get this work a lot and am looking for a much more effective way of working the dataset,

I have numbers like 1.1, 1.2, 1.3 and so on....... These come under criteria like (1) = 1.1, 1.2, 1.3 and so on.....

I am look for an automated way of doing a count of any number that falls under this criteria, so I want to count based on criteria (1) it would count all 1.1,1.2,1.3 and so on as one count.

I am attaching a sample document to see how it is laid out. [URL] .....

I've got two columns, one with policy numbers, the other with error codes.

A policy could be in the list more than once, so I'm counting the number of unique policy numbers with the function

=SUM(IF(FREQUENCY(A10:F10000,A10:A10000)>0,1))

I want to count the number of errors that are NOT code 00 or code 21. Because the error codes are saved as text, I'm counting the number of errors with

The problem is that since a policy number could be listed twice, when I count the errors, I might be counting the same policy as an error twice. This means that I could feasibly end up with more errors than I have unique policies, which doesn't work.

What I'd like to do is only count the number of errors that have unique policy numbers. That is, I only want to count an error the first time it is in the list, based off it's policy number. Is that possible?

Been working on this issue for the last couple of days with no luck. I have a column of data that is a data and time stamp, for any date or time like below. This is an ever growing list as users continue to populate the data.

On a separate sheet I have a list of times by 15 minute increments starting at midnight until 11:59PM like below.

12:00:00 AM 12:15:00 AM 12:30:00 AM 12:45:00 AM

I'm trying to count how often a time stamp occurred between two 15 minute increments. ventually I'll be plotting this data on a graph to show where most occurrences happen.

I have a formula that counts if a date range is present. However I need to change it to count another column only if that date range is present. For example a17 a50000 the user will enter the date of the order. and in column B has the order number. I want the formula to count the order numbers for a data range in column A. Here is what I have but it is counting the dates in col A not the order numbers in B?

I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.

So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).

I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.

Sub Findall() Dim y As Long Dim starta As String Dim tr As Long, tc As Long Dim sr As Long, sc As Long Dim s As Worksheet, t As Worksheet Dim SourceCell As Range 'Setup Application. ScreenUpdating = False Set t = Sheets("Target Sheet") Set s = Sheets("Search sheet") Set SourceCell = ActiveCell Do While IsEmpty(ActiveCell) = False Counter = 1 'Get last used row in Target Sheet t.Select..........................

I have a 2 groups of column headings with a different month and year in each heading so

1st Group of columns range Columns AJ through AX Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"

2nd Group of columns range AY though CE Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"

Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"

Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"

Because the ranges keep changing month over month, how do i do this.

I have an excel sheet which is currently 1,100 lines long and expected to increase and has a number of dates in columns W-AO representing the dates in which someone has had an onsite assessment. I wish to report in column AQ if there has been any visit activity in the month, i.e August for this month’s report. Is there an Excel function which will allow for this? Im thinking something like having a drop down list to select the month at the top of the column and then the sheet returns a value of 1 for all lines where a there is a date equal to the month selected?

I guess it is also worth mentioning that the sheet is setup as a table.

I have my workbook set up so that one worksheet contains the names of all my departments/sections listed with their 3 letter code (this can be anything from AAA-ZZZ, e.g 'FYH', 'JWK' or 'KZA' are all valid) in Column F. I then have Columns H, I, J & K blank and require them to be auto-filling based on data from 4 other worksheets - i'll detail what i need below, but Column H needs to be filled based on what it finds in worksheet 'Data 1', Column I should be filled based on what it finds in worksheet 'Data 2' etc. etc. I have four further worksheets that contain data based on the types of assets owned by the department/section, these are 'Data 1', 'Data 2', 'Data 3' and 'Data 4' and I use these as described above, with Column H referring only to 'Data 1', Column I only to 'Data 2', Column J only to 'Data 3' and Column K only to 'Data 4'.

What i need then, is a VBA that will take the value of a cell in column F on my main worksheet (called 'main') and then count the number of occurences of that value in Coulumn A on another worksheet and place the number of occurences into Column H, I, J or K based on which sheet it's checking.

For example, Cell 'F2' on my main worksheet contains the value "ABC". I need to take "ABC" and search Column A of worksheet "Data 1" to find how many time it occurs, placing the result into Column H of worksheet 'Main', I then need the same value to be counted in Column A of 'Data 2' and its result placed into Column I on 'Main', and again for Column A of 'Data 3' with the result being put into Column J of 'Main', and finally Column A of 'Data 4' to be checked and that result placed into Column K on 'Main'.

does this seem too much of a task for VBA? or am i best doing each column separately with a CountIf or Array formula?? Not sure whether a COUNTIF or Array formula will do the job.

I have my workbook set up so that one worksheet contains the names of all my departments/sections listed with their 3 letter code (this can be anything from AAA-ZZZ, e.g 'FYH', 'JWK' or 'KZA' are all valid) in Column F. I then have Columns H, I, J & K blank and require them to be auto-filling based on data from 4 other worksheets - i'll detail what i need below, but Column H needs to be filled based on what it finds in worksheet 'Data 1', Column I should be filled based on what it finds in worksheet 'Data 2' etc. etc. I have four further worksheets that contain data based on the types of assets owned by the department/section, these are 'Data 1', 'Data 2', 'Data 3' and 'Data 4' and I use these as described above, with Column H referring only to 'Data 1', Column I only to 'Data 2', Column J only to 'Data 3' and Column K only to 'Data 4'.

What i need then, is a VBA that will take the value of a cell in column F on my main worksheet (called 'main') and then count the number of occurences of that value in Coulumn A on another worksheet and place the number of occurences into Column H, I, J or K based on which sheet it's checking.

For example, Cell 'F2' on my main worksheet contains the value "ABC". I need to take "ABC" and search Column A of worksheet "Data 1" to find how many time it occurs, placing the result into Column H of worksheet 'Main', I then need the same value to be counted in Column A of 'Data 2' and its result placed into Column I on 'Main', and again for Column A of 'Data 3' with the result being put into Column J of 'Main', and finally Column A of 'Data 4' to be checked and that result placed into Column K on 'Main'.

does this seem too much of a task for VBA? or am i best doing each column separately with a CountIf or Array formula?

In column A I have a set of Ids that are not unique. In column B I have a set of latlong values for those Ids in column A. In column D I have the unique list of Ids from column A(Removed duplicates from column A & pasted them in column D). In column E, I need the latlong value which has highest frequency for each Id. I tried countif,Frequency and tried mixing them up with various other formulas but it is out of my reach.

I have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.

I need to be able to count all the blanks in columns other than A but only until the last used cell in column A. I am using a formula right now that counts the blanks in column A until the last used cell but I don't know how to apply the range of column A to other columns like B and C. Here is an example of what I hope to accomplish:

Formula used in A1 that I need applied to other columns but with the range of column A

how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.

I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.

CREATE TABLES LIKE BELOW?Column A Column B Column C

March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................

i have is 3 sheets in the same excel document. Sheet 1 is the mater sheet, which is a compilation of sheets 2 and 3, however the sheet layouts are different.

The sheets consist of a list of names and details. Sheet 1 has all the names in the list, however sheet 2 and 3 only have partial lists that are in a different order from the original list. The details listed next to the names in sheets 2 and 3 are different and hence a straight forward row copy and paste will not work.

What i need is to write a vba script that can take the name from the master list, search sheets 2 and 3 for the name and lookup the variables placed in next to the name, then update the master sheet accordingly, then continue to the next name on the master sheet and do the update again, and so on until all is updated. I have already thought about using lookup functions in excel however there is 1000 names on the list and around 60 details so it would be messy.