I need to group those machines under 1 part number. For instance, part 123 is used in which machines, I need to state them in a way like above. But repeated should not be stated again.
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
I have a spreadsheet that I have various formulas and sheets. To simplify:
Sheet 1: Columns A & B have Name and Code Number. I can add additional names and code numbers to these two columns whenever necessary.
Example:
Tom 874 John 385 David 712
Hidden in adjoining columns are formulas to automatically sort them via Code Number. Next to that are the columns showing the sorted information, sorted by number.
John 385 David 712 Tom 874
Additionally, I have a seperate sheet for Tom, John & David. Since I put Tom in first, he's Sheet 2. John is Sheet 3, and David is Sheet 4. I can use hyperlinks so when I click on John, it goes to Sheet 3; David Sheet 4; Tom Sheet 2.
Now, let's say I add Kevin 192 to the next row. The hidden columns are set up so that it'll automatically resort Kevin to the top, with John, David & Tom in the next rows down.
The issue I have with the hyperlink is that it's cell specific, not content specific, as far as I know. I would like the hyperlink to move with John's info so that it would still go to Sheet 3. Same with David and Tom. Unfortunately, after the resort, If I clicked on Kevin's name (which is now at the top of the list), it would go to John's sheet, since the hyperlink is attached to that cell.
How to allow a hyperlink to remain with the content, versus the cell? I would prefer it to be not a macro, but I'll take a macro over nothing!
I'm trying to make a floor plan which shows what seats are available depending on the time it is. So I made sheet1 = to the map (where the seats are located), sheet2 - rows = seat #'s, columns = Time (broken down by half hours). Now i have conditional format to show "t" in red (which means taken), "f" in blue (which means free), and "n" to show in gray (which means not working).
What i need is example - Seat # 200 in sheet 1 to show red, blue, or gray depending on the value in the row that corespond to this seat and the column that corespond to the current time.
Is it possible to have a macro create a hyper link once data is entered into specific cell, i have a multi sheet work book used as a stock card system.
Each stock item has its own worksheet and the product code is entered in to cell E3 (which in turn has a macro in it to change the sheet name to match the product code).
the macro also inserts a row of info into row 5 of another sheet used as a summary sheet ( CONTROL.SHEET or SHEET 4) using copy and paste link.
i need a macro to generate a hyperlink in cell D4 of the control sheet between the row info and the matching product code sheet ( the product code is displayed in cell E4 of the control sheet.
I only input one item at a time and then manually cut and insert the row info into the stock list on control sheet. so every time i input a new item, the row info is always in row 5 of the control sheet.
I want to create a summary page with the tab name and a link to the contents in a specific cell. In the code below, I can get the sheet I want but in the second column, I would like to link to the data instead of getting the data in the cell. Can I do this with a simple modification to this
Dim a As Long Sheets.Add.Name = "Notes" For a = 1 To Sheets.Count Worksheets("Notes").Cells(a, 1) = Worksheets(a).Name 'The next line gets me data, but I want to link to this cell in all worksheets Worksheets("Notes").Cells(a, 2) = Worksheets(a).Cells(15, 18) Next a
I am working on Excel 2010. I want to find a way to link data from one spreadsheet to another one and whenever I update the first spreadsheet, the second one will be automatically updated?
I have a column of data that constantly changes in length and want this column to autosort the data alphabetically when the data changes. the list contains the names of worksheets
I then want to display in the next couple of columns data from the worksheets listed in the column. i know i can do this manualy by saying that that the cell equals sheet? cell etc but was wondering instead on putting in a formula of ='A sheet'!E20 i can put something where A Sheet is that uses the name in the column of data ?
I am trying to link data from multiple sheets in a file into one sheet. This is the following I want to achieve.
1) I want to pull data from the tab - Tab 1 (in the attached sheet) from column F only if the column E cell has 3, into the "Plan" Sheet in cell D5. I want all the 3's information from Tab 1 (F12, F14, F16 and F17) to be in the same cell D5 with alt+Enter spacing. The trick is these cells may not be always 3 they can be either 1,2,3. So the function needs to go through the entire range E10:E69 to find where there are 3 in the E column and then return the corresponding data from the F column to the "Plan" sheet in Tab 1.
I have a workbook with two sheets. One contains raw data without any formatting. I'm trying to link the cells in "Raw Data" sheet to my "Clean Data" sheet.
The data are financial results by divisions and each division by year. So my goal is to do a loop 'Do until or 'Do while by the years to separate the divisions. My years go from 2008 to 2013 repeating itself for each divisions. Doing that way, when I add a year in my "Raw Data" sheet and re-run my code it will add the 2014 financial results to the "Clean Data" sheet.
I wonder if it is possible to bring data from DDE-links to variables in a macro without first bringing it to cells in Excel. The reason why I want to do this is because I only need the data when the macro is run (that is when a certain button is pushed). It would be a waste of system resources to continously link the data to cells in Excel. I asked the same question a few days ago at another forum but didn't get any reply.
I have a spread sheet that has streaming DDE link from Think or Swim (my stock broker). The data keeps updating durning the day, what I want to do is to take a snapshot of the data every hour during the day. Then I want to put that data in a new cell every hour so I compare the change.
I have a column who's content is determined via about 6 nested if statements from data on that row. That cell is then conditionally formatted to a certain color based on the text that is ultimately printed from the nested ifs (simply an extra visual legend for the text). All of this contributing info and about 1000 lines items make a very large and difficult to print page. What I am trying to do is a make a summary sheet that simply takes the index number of these 1000 rows and copies or links the conditional formatting of the mentioned cell onto this number on another sheet. I have already linked this status cell and put it adjacent to the index number which works well in that with two columns I can show the index and status but if I could combine the color of the status cell onto the index cell, it would be even better. I am pretty sure another conditional format for this summary sheet would not be possible or be extremely complex since the contents of the index cell I am conditionally formatting have no bearing on the conditions for the format. Was hoping there is some VBA magic that could simply mimic the conditional formatting from one cell and put it on another.
I have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String Sheet = InputBox("Take Data from where?") Dim startcell As String startcell = InputBox("Start Cell?")
I have an MS Access Data link (parametrized query) set up in Column A. (Specifically A5:B85). However, every time I change the value in cell G2 (the source of my A5 result), the width of column A always changes. Is there a way for me to get column A to "freeze" to a width size of my selection?
This is what I have now. YTD_annual_interest earned_3.xlsm
When you click the "update Workbook" button, it creates new tabs using the names in Column A5 through A29. If you look at the tabs named John Jones and Phil Williams, you see what I want to happen once the tabs are named. If you look at Mary Smythe, and the rest of the sheets, this is what actually happens.
My question is two fold.
1. Can the sane button be used to grab and copy the data in the corresponding rows as the named tabs? If no, how can that be done?
2. I want to populate the new sheets with the data as in the John Jones, and Phil Williams sheets automatically.
I have a "cost.csv" file that contains the cost of the toys. The cost is show in $ with two decimal places i.e. $0.75
I created a new MS Excel 2010 workbook file named as "customers.xlsx" that has four columns i.e. Item, Cost, Order, [Total Amount] columns. I used the paste link command and the Cost column data is linked with the cost column in "cost.csv" file.
When I write order quantity in the order column and then try to use the following expression in [Total Amount] column i.e. "Cost * Order" then I received error due to following reason i.e. "Cost is a text value and Order is a numeric value and excel is unable to evaluate the expression." I have done it by first remove the $ sign from cost using RIGHT and LEN FUNCTIONS.
Now I want to change the format of "Cost" column i.e. I want to show the cost in Euro but not in $. Here I am stuck as I am trying to change the format of the Cost linked cell but unable to change it either I applied the new format, the text remains shown $0.75?
Is this the problem as data is coming from .csv file? If it is then how I can accomplish the task?
So I have a set of data in my sheet 2 that I want to be connected to sheet 1. The data in sheet 2 looks like this,
NO Reaction H S
1 2Fe2O3 + 3C = 4Fe + 3CO2
105690
120.21
2 Cr2O3 + C = 2Cr + 1/2CO2
218,085
59.24
while in sheet 1,Reaction No
Carbothermic Rxn
H
S
What I want to do is that when I put a reaction no (e.g 1) at the empty cell next to the label Reaction No, the data in sheet2 (i.e. Reaction, H and S) would automatically be reflected in the empty cells next to Carbothermic Rxn, H and S.
I am trying to record a macro so i can click a button and have excel break the link between my charts and the tables that drive them. during the record phase, i click on each chart and use F9. the problem i am facing is that now my macro sets the charts to the data that was there when i recorded the macro, erasing any changes i have made.
I have a worksheet that contains data in sheet1 Cells B2:B14. I need to copy this data into the Summary worksheet B2:N2 and to link it so that it updates on the summary Sheet.
When using Paste Special Transpose, it does not allow one to Paste Link. Is there another way to do this besides using a linking formula?
How can i link colors used in charts to companies i have i my database. Now excel provides colors in a certain sequence but this is not what i want. I attached a file in which i for example wants to create pie charts of the company's sales. What do i have to do to give each company its own color?
I am trying to get the information that I have plotted, on a scatted graph, off onto the second sheet an splitting the information. I'm not too sure if this is the right place for this thread, but I am hoping that someone can help?
The original data that is on the graph is in 3 columns. One has the company name, one is the current value and one is the predicted value.
I need this info to come off the graph or from the original data in 2 fields. Customer and predicted value, but they need to be prioritized.
1 needs to be the one with the lowest current and highest potential. 2 needs to be the 2nd lowest current and 2nd highest potential......so on. Then I need to get the highest current and highest potential.......so on.
I know that what I require is quite complex and it may have to be via calculations, but I am hoping that excel can do this?
once I get the pretty boxes and such, how do I link this form to a sheet to record data? How do I get it to run? I have tried searching the forum, but it seems that most of you already know that part and don't have any problems there.
I know this is probably very very basic and I will smack my face with my hand when you point it out. I just have never created forms with Excel before. I am used to using SalesLogix and when I create forms there, I have a database table that I can link each field to, so I keep looking for how to link to the table and I can't figure it out.
I've got several sets of data all which link to seperate charts, the problem i'm having is that i dont want the chart to display the fields with zero values and with the amount of charts and data it is taking ages to re-source the data is there a way of getting the chart to ignore zero fields or of somehow sorting the data in a way only fields with values are shown
