Link To 20 Out Of 60 Sheets

Jan 29, 2010

I have a cell that a I want to get the results of a SUM to 20 cells in 20 worksheet out of 60 worksheets. When I enter my' =sum( shows up with serial_numbers. When I go to each sheet and select the cell I want (same in all worksheets) like in sheet 2 it shows my sheet name and cell. But when I go to my sheet 3 and select that cell it replaces sheet 2 with sheet 3 it does not keep adding the sheets with the cell numbers. When I select all sheet tabs it still only changes the sheet number in stead of running a range. I could type all the sheets names and cell but lots of work and I have a lot of this type of ranges to do.

View 2 Replies


ADVERTISEMENT

Link To All Sheets

Jun 20, 2007

Pre is where the user type information and these information would then shared throughout all the sheets. There are a total of 5 things that I need to be done (Those indicated with numbers are the ones that need to be done).

1st thing: How to highlight the days for all the TERM BREAKS?

2nd thing: How to link the dates for the Public holidays to P1_B1 and highlight it red. Without using conditional formatting because there maybe more than 3 public holidays.

3rd thing: Number of groups entered here would create rows of group according to the number of groups entered in Pre

4th thing: The number of classes entered here would create the number of rows for each particular subject. Eg. English has 3groups so there are a total of 3 rows.

5th thing: The number entered for the number of programmes would create new sheets with respective to the number entered there.

*I have to only enter no the Pre sheet and it will automatically link the information across the rest of the sheets without the need to press RUN. *

View 2 Replies View Related

Link One Column To 30 Other Sheets?

May 8, 2014

I build a tool in excel to make an analysis per industry (30 industries). I want to compare the results on the first sheet, as a summary. All the information is now scattered over the sheets, but what I want to do is when you change the ticker in column A, it automatically retrieves the information from on of the sheets for the specific company. I will try to make myself clear to attach a screenshot.

So if you change ticker in column A, I want to fill columns C:D:E, G:H:I, K:L:M, O:P:Q, etc automatically according to the company name.

View 5 Replies View Related

VBA To Link Cell Between Different Sheets?

Mar 12, 2014

I have a macro that copies a sheet and renames it:

Copies "Q114" and renames it to "Q214".
Q114 is defined as OLD in my VBA code
Q214 is defined as NEW in my VBA code.

I also have a third sheet, call it "results", which picks up cell values, ie cell A1 in "Q114", but now I want it to use cell A1 "Q214". The values hasn't been filled in, so I need a link between them:

[Code] ......

View 2 Replies View Related

Link Textboxes Across Sheets

Jan 15, 2008

I need to link two text boxes on two different sheets. Is there a excel formula or macro to do this. I am entering text in textbox 1 on sheet1 and same text needs to show in textbox2 on sheet2.

View 4 Replies View Related

Inter Link Sheets In Same Book?

Jan 27, 2014

spread sheet training matrix. The subjects to be trained on are plentiful so I have broken these down into different sheets. I produced this to my boss and the first thing he asked was "can we link the sheets so I can get information about one single employee" in other words I have a list of employees in the first column and this list is the same on each sheet, the headings on the sheets are different but instead of having a set of columns about forty headings wide I have split them down to ten headings on four sheets. The big question! Is it possible to print one sheet with one employee but all of the headings? When I say headings I mean the columns under the headings as well.

View 4 Replies View Related

Link Textboxes To Columns In Other Sheets

May 28, 2009

I have an excel file containing three sheets(1,2,3). And each sheet has 9 Columns (A,B,..,I). Now for the first sheet i have a functioning mask (userform) through which i can edit the columns live and add new rows.

Now i have a userform which is devided into three parts. The third and the last part is working fine which is linked to Sheet 1. Now i want the first part(on the top) of the form to be linked to Sheet 2 and the midpart to sheet 3.

In first and second part of the userform there is button (copy this to sheet 1 as new). This button should be coded in a way that if its clicked then the active entry (in sheet 2 or in Sheet 3) should be pasted at the end of the sheet 1 rows and the textboxes linked to sheet 1 should jump therer so that the new entry can be edited directrly in sheet 1.

The mask can be opened by the button in Sheet1 column A1! I am using 1280x1024 pixels for my grafikcard.

I am attaching two files. Excel file 2003 xls in zipped form and an image of the mask as jpg.

View 9 Replies View Related

Link Sheets To Access Tables

Jun 28, 2007

Is it possible to somehow link sheets in excel to different tables in Access so when I update the sheets in excel it can automatically update the tables in access?

Doesn't have to be on line but I want to avoid the continous copy paste or exporting and trying to automate this process.

View 4 Replies View Related

Link Sheets Based On Grade Level.

Aug 31, 2009

I would like to link students for the 1st Nine Week list to the correct grade level as shown. I have attached a file.

View 2 Replies View Related

Link Sheets So That Values Are Automatically Updated

Dec 19, 2012

I am very new to using excel and I need connecting the information between two sheets. I have a weekly schedule that I want to use for my employees. I want that information to automatically be moved to a daily schedule. I need to be able to see how many openers closers and mid-shifts I have and how many hours I am consuming from my budget. I want the shifts from the schedule to be moved to the daily schedules in order in chronological order (morning shifts first, then mid-day/closers). If at all possible how I would like to have the span of their shift to be highlighted in the cells on the daily schedule.I will attach what I have so far to provide as much info as possible.

example.xlsx

View 1 Replies View Related

Update Link Between Sheets Automatically And In Sequence

Nov 1, 2013

I have a excel workbook with One Master Sheet.

The data entered in the master sheet is automatically updated in the sub worksheets through direct links created . Each sub worksheet is a branch of organization. almost 100 branches are there.

The data is entered for all the branches in the Master Sheet at different periods continuously which is to be kept as such.

For example In first day 10th, 15th branch data may be entered in master sheet first and second row, which is getting automatically updated in the respective branch worksheets. But the problem is when the data is entered for any branch( for example 6th branch) in 5th row of Master sheet, in the respective 6th branch sheet also, it is updated only in 5th row only, leaving the first four rows blank. But i want the updation in the branch sheet continuously without any blank rows.

For updation i have used the simple direct link between the cells of Master worksheet and Branch sheets.

How to get the updation in branch worksheets while entering the data in Master sheet without any blank rows.

View 6 Replies View Related

Link Variables & Sheets In Macro To A Userform

Jul 24, 2007

I have a sheet with 3 macros. It consists of two macros to produce results, and the third to bridge the two together where is all starts. I have built a userform in the sheet and am trying to get the variables in both sheets, to be user changeable and selectable via the userform.

In the attached data, the userform allows for the selection of two sheets, A and B. The user would select in A the sheet with data which is equivalent to Oval_An and in B the sheet with the data equivalent to Oval_DMA. The first macro, Find_75 runs, followed by the second macro, kTest, all working to produce results when hitting the Subtract button on the form. The Find_75 tolerance are also defined via the useform box, as well as kTest's compare tolerance.

View 6 Replies View Related

Link Cells In Adjoining Sheets If Contents Match

Apr 21, 2009

I have a list of items in column A of Sheet1 and the same list in column A of Sheet2. Both list will contain the same items, however not necessarily in the same order.

What I want the book to do is; when I click on an item in the list on Sheet1, it takes me to the same item in Sheet2.

Is this possible with VBA?

View 10 Replies View Related

How To Return To "original" Sheet After Using A Link To A Other Sheets?

Jun 17, 2008

I have a workbook with about 200 sheets.
Each sheet contains lots of links to the other sheets, so the user can clink the link and then go to the new sheet.

But, how do I make a "return-function"? That can return the user to the sheet that was active before the link was followed? If possible I would like this do be doable for 5-10 sheets back.

This "return-function" is gonna be used by clicking a button on a floating toolbar I have connected to the sheet.

View 9 Replies View Related

Formula That Uses Link In A Cell To Create Offset Link

Jun 28, 2013

I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.

On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.

In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?

View 6 Replies View Related

Link Data From Multiple Data Sheets

Sep 4, 2009

I am trying to link data from multiple sheets in a file into one sheet. This is the following I want to achieve.

1) I want to pull data from the tab - Tab 1 (in the attached sheet) from column F only if the column E cell has 3, into the "Plan" Sheet in cell D5. I want all the 3's information from Tab 1 (F12, F14, F16 and F17) to be in the same cell D5 with alt+Enter spacing. The trick is these cells may not be always 3 they can be either 1,2,3. So the function needs to go through the entire range E10:E69 to find where there are 3 in the E column and then return the corresponding data from the F column to the "Plan" sheet in Tab 1.

View 4 Replies View Related

Copy Data From Sheets In Workbooks In Folder To Main File Sheets Of Same Name

Aug 29, 2008

I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.

So far I have only managed to list the files in the folder using code I found on your site!

View 7 Replies View Related

Select Multiple Sheets And If Value In Cell Is True Then Copy Values In All Sheets And Hardcode Data

Feb 26, 2012

I have a workbook that updates from external source and creates sheets depending on a cell range.

I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets

What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far

I get compile error here ........Sheets(ArrSh(1)).Activate

Also need it to work for all the other rows.

Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate

[Code] ......

View 2 Replies View Related

Run-time Error '1004' Method 'Add' Of Object ' Sheets' Failed Adding Multiple Sheets

Aug 9, 2007

I have been running a simulation for about 18 hours now and just received:

Run-time error '1004':
Method 'Add' of object ' Sheets' failed

I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:

ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)

The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...

View 9 Replies View Related

Sorting Sheet That References Data From Other Sheets (Google Sheets)

Jan 25, 2014

[URL] ....

I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.

View 1 Replies View Related

Hiding Sheets But Still Letting Macros Run When Printing Hidden Sheets

Nov 10, 2008

i have a workbook that has the following sheets

working sheet
job sheet
receipt of deposit letter
completion sheet
delivery note
delivery note (2)
odd
even
t&t
glass
ggf

i want to hide every sheet except the working sheet.
I have tried this but the macros bring up an error when i run the macro

my macros involve printing certain pages dependng on what button is pressed

i get an error whatever
how do i stop this

View 14 Replies View Related

Unhiding Sheets With Combobox Selection And Duplicating Sheets Automatically

Sep 27, 2011

I have 25 sheets in the workbook and a combobox on the main page, The combobox references a range of 1-25 that represents the 25 hidden pages. right now i can get the sheets to unhide one at a time based on the selection e.g. combobox option 1 will unhide sheet 1 but the sheet are representing sites in a design so i need to have the option to select multiple sites in the combobox option so for example if i select 5 then sheets 1-5 should unhide. I hope I've explained that clearly.

The other question or option would be to just duplicate sheet 1 based on the combobox selection e.g. selection 5 duplicates sheet 1 5 times.

View 9 Replies View Related

Delete Chart Series Across Sheets But Skip Protected Sheets

Mar 30, 2008

I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets

Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................

View 4 Replies View Related

VBA Code To Copy / Move 12 Sheets To Master Sheets

Jun 24, 2014

I need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.

For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.

I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.

I attached the file : Sales 2014.xlsx‎

View 5 Replies View Related

Re-Naming Sheets Per Cell Data & Hiding Sheets

Aug 26, 2009

on sheet1 I have a button I need to do the following when clicked:
(1) name the next 30 sheets based on cell values in sheet1
(2) for those 30 sheets, hide some of them based on a y/n input in sheet 1

To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.

View 4 Replies View Related

Merging Sheets / Copying Cells From X Sheets Into 1 Sheet

Feb 22, 2013

I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.

What VBA functions to use???

View 4 Replies View Related

Printing Multiple Sheets In Workbook With Hundreds Of Sheets

Feb 18, 2014

I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.

The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.

View 3 Replies View Related

Copy From Multiple Sheets (26), PASTE To 1 Sheet From 26 Sheets

Dec 26, 2009

I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.

I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.

View 9 Replies View Related

Copy 2 Linked Sheets Without Links To Original Sheets

Sep 5, 2007

I have copied and then pasted & linked numerous cells from one sheet to another within the same workbook. When I copy the 2 sheets (Edit>Move or Copy Sheet>Create Copy) the linked cells on the duplicates remain linked to the original sheet. How can I copy the 2 sheets and have the cells on the copied sheet be linked to the copied sheets and not the original?

View 4 Replies View Related

VBA - DDE Link

May 6, 2009

I have created a DDE link which is connected to Excel and refreshes on every change but the problem is it's only 1 row in height, so as new data comes in I lose the previous. Instead I want the old data to move down a row and I want this to continue as new data comes in.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved