I pull a report every month which has the same name - at the beginning - (i.e. Monthly File Report_06012014.xls but the date is different every month; where we keep a copy of them every month.
So I need a vba to pull the data from that specific file - since I'll have more files open, but wouldn't keep the date since it will be different every month - is there an & that goes at the end or somehting: Monthly File Report &....xlsm?!
i need a macro that pull specific data from word to excel.
I don't know where to begin or if this is even possible. I have report that I need to format.
See example file. Note: real file has 2000 rows.
The book date and book amount in the orginal is the POS date and POS amount in the format sheet. I don't need the "over/short" data from the original. Col. A contains store #'s and they are 2,3,or 4 numbers long preceeded by an "S-". In the formatted sheet I need the "S-" removed. The data is grouped by column C. 3 of the same equals 1. Groups vary.
I have a complex data set that has been imported into Excel from a binary data file and I am looking for a way to simply pull out specific fields. I tried to record a Macro that would simply delete the rows between the data rows I want to keep, but it always references itself to those same ranges and I'm not sure how to identify that I want it to sequentially move down the page deleting the same number of rows, and adding the row of information I want to keep as it goes.
I am trying to pull a specific time frame of data from worksheet, in a large file, into another active workbook. A fiscal month. I don't know how to at all. I figure it should be a And IF and Vlookup but do not know how to execute it all.
View 1 Replies View RelatedHow can I pull data from a specific cell from a closed worksheet in VBA?
Not sure but I think that Workbook("wb1.xls").Worksheet("Sheet1").Range("A2") only works if the worksheet is open.
Basically what I want to do is pull data from another file and have it copy it down about 10 lines onto another file. With a seperate sheet for each vehicle. For example:
File 1: Has 2 columns with data
Vehicle Number 1000 Vehicle Type Ford
1001 Chevy
1002 Dodge
File 2: Has a vehicle log sheet, in which i want it to take the data above and copy it down x amount of lines.
Vehicle sheet | Date issued | Hours used
Vehicle Number| (data from file one here) | Vehicle Type (data from other column in file one here)
And have it copy itself down from like A1 to whatever.
These also have to be on seperate sheets within the workspace, and each "tab" be named after the vehicle number,
I need to pull out data from a word file(can open in excel 2003) which has several different rows with data in a certain format each time.
I want to take the data from sheet #1 in the format
________
where the underline always equals an 8 digit number that directly follows that unique text(no spaces)
and pull out all the 8 digit numbers from the sheet and put them into sheet #2 that my macro creates.
Also the additional rub is that I need to pull only the unique 8 digit numbers as there will be several repeats.
i need away that will give me the way to pull data from specified place
in txt file to A1 cell in excel sheet3
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log.
The range would be for 7 days and would have to be able to choose a few columns off this report.
I'm trying to streamline some processes at work and have encountered a bit of an issue.
I have a source file containing a grid of data (9 columns) with a series of dates they relate to down the left side e.g. 13-Feb-2013. This data covers a whole year.
What I want to do is pull through data relating to a discrete month into a grid in a seperate workbook.
I have a feeling that date ranges and possibly some kind of lookup might be useful but am struggling to see how to pull it all together.
I have a macro that first refreshes a specific data range that imports data from a text file as such:
View 2 Replies View Relatedimporting some selective data from txt file to excel. Only the following rows I need to pull out from text file into the Excel i.e. Project row, installation row, and two rows immediately below the installation row. This is my logical procedure..
1. Macro look for the rows that contains the word "PROJECT"
2. Open an excel file
3. Pull the row from txt file to this new excel file.
4. Macro look for the rows that contains the word "INSTALLATION"
3. Pull that row with INSTALLATION AS WELL AS Two rows immediately below the INSTALLATION row.
I have to open each pdf file in a specific folder, select and copy all contents and paste it in column 'A' of a new workbook.
I have tried following code but not worked...
Code:
Sub ConvertPDF(control As IRibbonControl)
Dim AdobeApp As String
Dim AdobeFile As String
Dim StartAdobe
Dim fso As New FileSystemObject
[Code]...
I have Acrobat Reader installed. Any method without using 'SendKeys'?
I have two workbooks open, the first is a summary, the second has new data that needs transferring into the summary. Before transferring the data I need to check that 10 specific sheets exist in the file with the new data.
I have found some code that checks for one sheet name, but really need to check for 10 specific names, if any are missing then I need a message to appear, listing the missing ones and stopping the macro from proceeding,
Dim mySheetName As String, mySheetNameTest As String
ActiveWindow.ActivateNext
mySheetName = "Data"
On Error Resume Next
mySheetNameTest = Worksheets(mySheetName).Name
If Err.Number = 0 Then
[code].....
I have been trying to work this out by looking at other posts (mostly concerning Binary Access) but can't figure it! The source text files I am using can vary in length from 4,000 characters to well over 100,000 characters. However the data I am looking for always starts 40 characters from the end of the file and is 10 characters long! I need my macro to pick out this data and store it as a string (so it can be added to an array and exported to a worksheet later)
View 2 Replies View RelatedI have a text file with no discernable format ( can't import into excel) that is too large to put all the data into an excel worksheet. This file is made to print out on a network printer.
I don't need all the info in the file, I would like to specify a variable, search the text file for the variable, then specify the amount of rows down to look for the data value and input the result into an excel spreadsheet.
I pulled a report into excel that lists staff details and workgroups that they have access to. There are nearly 8000 staff who can have anywhere from 0 to 120 workgroups.
The workgroups are listed with the staff details in the following format:
SurnameForenamePost Title183860314040|188778743040|261226948048|584865373040|088365861041
SurnameForenamePost Title695416612049|751836367043|430463930049|461208099048|488798547045|723225723045|183860314040|472108996043
SurnameForenamePost Title177448555041|315136549047|400323457046
With the whole list appearing in one cell and not in numerical order.
I need to pull out a list for each workgroup, with all the staff who have access.
Even if there was a way I could separate out the workgroups and get them to line up.
My workbook has several worksheets so do you need the name of those to be excluded? Or how many sheets i require which are located to the right of the summary tab?
Detail - 5 sheets to the left of summary tab are to be ingored, 7 to the right of the summary are to be pulled (let's say they're named Red, Green, Blue). I only want the colour named tab data pulled and pasted into the summary
Code is below :
Sub karryan()
Dim i As Long
For i = 1 To 3
Sheets(i).UsedRange.offset(1).Copy Sheets("Summary").Range("A" & Rows.count).End(3)(2)
Next i
End Sub
I have six images in "Sheet3" I want a macro to copy and paste image one if cell A3 = 0. How do I know the "name" of each picture so I can change the image based on the value?
View 2 Replies View RelatedI have a sheet with 200 sheets in called workbook x , I need to create a summary new workbook with only data on 1 sheet.
I want to pull specific cells from the large workbook x to 1 single sheet on a summary workbook:
A6 I want to be surname taken from B1 of workbook x
B6 will be first name taken from C1 of workbook x
Then I will copy data from M1 on mastersheet to cell C6 on new workbook
Then I want to copy Row A11 up to T11 and paste on the new workbook (Summary) in D6 staying in the row 6
Not sure if this is the tricky bit I want to repeat as above B11 to T11 but paste in the next empty cell of the same row of D in my summary
I need to repeat this action upto A23 to T23
Then I need it to move on to the next sheet in X and repeat all the steps above but do it on the next row down row 7 and so on
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I also need it to look in column "C" in the ("FY09 SOF") file and pull the entire row if it finds the word "Payroll".
For some reason it will pull everything needed except the "Payroll" rows. What am I doing wrong?
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False..........................
I have an excel 2010 spreadsheet that lists all of our vendors and the amount we spent with them over the last year.
I want to know how many of them were local vendors.
I have a list of all the zip codes within a 100 mile radius (there are about 500 zip codes). I would like to write a macro or sort function that searches the entire vendor list and only reports back those vendors that are included in the zip codes I specify.
The columns are as follows:
A B C D E
Vendor City StateZip CodeTotal AP
Vendor 1TROY AL36082527.37
Vendor 2PHOENIXAZ85054100
Vendor 3TUCSONAZ8571416255
I want to keep the all the columns, I just want to eliminate all of the vendors that do not fall within the zip code criteria I set.
I need to pull a specific word from a string of text in a cell and have that word shown in an adjacant cell. For example A1 will contain the text "Smith Sun Alliance Pension Fund" I need B2 to show "Pension". I cannot use any filtering or text to columns as the word Pension can be anywhere within the text in A1 and I have thousands of entries. So I need a function.
View 9 Replies View RelatedWhat formula or function truncates a text field that is in the following consistent format:
number. name
ie. 3. Super Bella
and 150. Taoist
I wish to truncate the field so I have just the integer without the dot, space or word(s).
Tried Len, Left & Replace but they require a specific number of characters. Since the number can be 1 to 3 digits long, this doesn't work.
I have a worksheet that contains two basic columns of data, A and B. What I would like to do is based on the value in column A, I would like to copy the contents of column B to a textfile (preserving the basic line structure and hopefully without any extra characters like quotation marks attached). So for all the values in column A = 'Account', Id like to take all the corresponding values in Column E (for example) and save them to the same file, preferably where the filename itself as 'Account.xyz'. And I would like to do this for all unique values in Column A, that is do it for 'Account' and 'AccountPrivilege' etc. Note Column A is essentially presorted alphabetically already. There are actually 1000s of rows with hundreds of unique A values so Id like to find a way to automate this process.
A
B
1
Account
Company Information
2
Account
Company
[Code] ........
I'm trying to find a way to import data from an external excel file that the end-user will ultimately end up choosing using the application. getopenfilename dialogue. I'm able to sucessfully open the file, but what I'm really trying to do is import data from one specific column within the file, preferably without the source spreadsheet popping up.
So, is this possible to do with VBA? Also, will I run into any issues if I try to import from an Excel 2.1 file to an Excel 2003 file using VBA? Finally, I need to be able to import one file, and then be able to add to that an import from another file. I'm thinking that this could be accomplished using a variant variable, but is there already a function within Excel so that I won't have to create my own add-to function.
I have some code that loops through a bunch of text files, finding any that contain an href, and printing that entire line (if found) into excel. These text files are source code for a website. What I need to do, is within this line being pasted, is grab only a few things from within some tags such as the info between <title>This is the title</title> the tags and print it into a colum, I do not want the entire line, just certain things that are in the line. I have supplied the code that I currently have. I have it so that 'WholeLine' contains the entire line. Can I manipulate that with something like Cells (myR, 3).Value = WholeFile(?).
Sub CheckTextFilesForHREFs()
MsgBox "Press OK to begin report"
Dim WholeLine As String
Dim myPath As String
Dim workfile As String
Dim myR As Long
I have six files that are formatted the same(fld1-1.xlsx, fld1-2.xlsx...). Each file contains an I.D. number (random 25 digit number) in column A and a note (1-9) in column B. The only thing that changes between files is the note column. I want to pull from these six files into a master file. When all six files are combined the note column in the master file is complete, there are no duplicates. Because a blank vlookup returns a zero, could I use an IF formula. Something like IF VLOOKUP FROM data01(ISNUMBER(0), then vlookup in file data02. IF VLOOKUP FROM data02(ISNUMBER(0), then vlookup in file data03.
View 5 Replies View RelatedI need building a formula to pull information from a database file. The purpose is to try to interpret the data so that I can analyze a time period along with it's content. I don't know how best to explain it. Basically I have a table and I want it to pull information based on 3 criteria: time, type, and total. I would like for the formula to identify a time frame, then identify a type, and then take the totals and add them together.
Time / Type / Total
11:31 /1 / 4
11:43 / 1 / 6
12:04 / 2 / 1
12:31 / 1 / 3
Time / Type / Total
11:30 - 12:00 / 1 / 10
12:00 - 12:30 / 1 / 3
The top is the database and the bottom is basically what I want to happen on the other table. Pretend the / and dividers for each column.
