(1). selecting a specific range to copy that is within a table but starting at a specific row to the bottom of the table. E.g.
Range("C4").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.Copy
(2) finding the last row and then setting as a variable:
Range("D" & Rows.Count).End(xlUp).Select
lLastRow = ActiveCell.Row
I have people who wrote down that they attended a location on a certain date at a certain time, and I have their start and end time.
So for example my person data has something like this:
Arrive: 1/1/12 7:00 AM,
Leave: 1/1/12 10:00 AM
Arrive: 1/1/12 3:00 PM
Leave: 1/1/12 4:00 PM
Arrive: 1/4/12 8:00 PM
Leave: 1/4/12 10:15 PM
I also have those fields formatted as text and as decimals so I can work with whatever I need.
The next portion is a list of events that occur at these same locations. Here are some examples.
Event 1
Start: 1/1/12 8:15 AM
End: 1/1/12 12:15 PM
Event 2
Start: 1/4/12 3:00 PM
End 1/4/12 8:30 PM
What I need to find out is if the person was present at the location during any of the events.
A person may write down more than one visit to the location in a day. The events only happen once per day. I'm sure there's a pretty manual way to do this, however the list of people and events spans an entire year and it will be too time consuming to do it that way.
I have one column that has over 120,000 rows. In the column it is split into sections. I can manually find the min max from each section but would like to know how I could do this automatically throughout the whole column.
Here is a sample of data.
Column A
20.3456
21.4567
22.5678
19.3456
18.4309
19.4789
[code]....
I have what I think is a simple question. I simply want a function that shows the text string address of a named range. If I can do that I can then do a vlookup from another sheet, put the result in an address function, and in effect automatically update dynamic ranges on another sheet.
I swear I have seen this but I can't find it now. Searches result in hundreds of hits, none of them relevant.
To make sure I've explained this properly, I want to put the name of a named range in A1 and have the address of that range appear in A2.
I have 2 ranges which on their own seem to work fine (I have check by just putting ".Select" at the end of both of them). The issue is that I want to apply the same border format to both ranges, however, when I try to put them together in a "With" statement it includes all of the range from the top to the bottom and not just the 2 two ranges. Ranges being used:
View 2 Replies View RelatedI have a protected worksheet with 60 columns (20 sets of 3), and want to give my users the ability to hide the columns they're not using. There's a row of unprotected cells below the columns in question with data validation allowing a choice of either Show or Hide, and want my macro to act based on thier choices.
Since it's a large spreadsheet, I don't want to run 60 (or 20) different hide commands, if at all possible.
Is there a way to read the 60 different Show/Hide cells (or 20 range names) and join those into a single VB range so I can run the EntireColumn.hidden = True statement once?
i'm having a really hard time figuring out how to use target. offset to grab a range of cells. For Example:
I am currently running a macro that searches column "D:D" for data. When the data is found, i want to be able to Grab columns D to AG for that row, and apply conditional formatting. It seems like using Target.Offset should be able to accomplish this, but i can't figure out how to specify a range using Target.Offset. Currently, i have to specify each cell i'd like to select, and apply formatting one at a time, which has bloated my code considerably (and causes me to run out of room very quickly).
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
The User has made multiple selections with the mouse. The spreadsheet is filtered. The user will usually make different multiple selections on the following columns: A and X through to AR (inclusive).
I just need some code to capture these various multiple selected ranges so that I can copy the selected range as shown below:
Why the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
by what means is it possible to unselect randomly selected areas, rows, columns from all sheets?
View 4 Replies View Relatedtrying to select multiple ranges of data at once using variables as my selection range criteria.
I.e., I want something similar to:
Range("A10:A30,B10:B30,E10:E30").Select
But would like to be able to perform the same selection using variables.
StartVar = 10, EndVar = 30
I'm sure it's just a matter of syntax, but I can't seem to get it right.
I need some code that will find the column with the header of "Gender" and change the values from "M" and "F" to "Male" and "Female" but I keep running into issues.
I want to use a Select Case statement so I can set all other found values as blanks.
I am trying to do something that sounds fairly straightforward but have not been able to achieve the final result.
I have a sheet which has multiple range addresses stored in different cells and so far I have been able to pass the Range address to Range variables by looping through a range array. Now I would like to select these multiple ranges. My code looks as below;
VB:
Dim Cnt As Integer
Cnt = Sheets("Sheet1").(Range("1040").Value ' Cnt holds the the total number of ranges to be specified in Sheet1
Dim RStr(1 To 80) As String ' This will hold the range addresses specified in Sheet1 in cells C1041 to C1120. Upto 80 range addresses could be specified.
[SIZE=2] Dim Rng(1 To 80) As Range ' This will store the ranges based on the range addresses stored in RStr()
Dim i, j As Integer,
[Code]...
I am not sure on how to select multiple ranges using range array hence tried Union() however it is obviously not correct and throws an error.
I'm building a macro thats copying 4 rows of data at a time from a spreadsheet (has 1500 rows of data total) and transposing it to a master spread sheet. There are blank rows in between each entry (the data source I'm using isn't clean), so how can I either have the macro jump to the first row it finds with a value, copy rows until it stops finding a value, paste+transpose into a new document and then repeat the process throughout the document.
If thats too complicated, a macro that finds rows based on a formula would work as well. E.g. Start at row 5, copy+paste+transpose 5-8, start at row 11 (5+6), copy + paste+transpose 11-14, start at row 17 (x+6) ...etc... Here's the code I have developed thus far:
If MonthView control can be set to allow users to select multiple ranges and enter different dates into those ranges? I know I was able to do with with the previous Datepicker control and I thought it was as easy as setting the Show Modal property to true.
View 1 Replies View RelatedI need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies View RelatedI have been trying to write two formulas in one cell. I have been able to write them both separately but have been unable to join them both together. What I am trying to do if first search name them how many reoccurring numbers appear. I have provided an example below
a b c d
1 Tom 333
2 Sam 22
3 Sam 22
4 John 5
5 Sam 22
6 Sam 1
7 Tom 3
8 Tom 333
So the answer would be
Tom = 2
Sam = 2
John = 1
definitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI have a multiselect listbox with values that gets populated from a sql statement, and I would like to get is the first or second index from the selected item. I know how to get the listindex from a combobox by using:
VB:
cbnumber.List(.ListIndex, 0)
How can I loop through and get the 1st index number for the selected items only from the listbox? I want to pass this index number to another sql statement.
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
I need to get a macro to select all the data in column "A", sort it in ascending order, omit the blanks if any, then select (highlight) all the data so that another macro can be run.
When I record it, it will only record up to the last row I highlight but the data always changes so there could be more or less.
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I have sheet with rows and column from cell(1,1) to Cell(8,18) and it has #N/A inside these data. Is there a way to use Find function to find #N/A and replace it with empty space?
View 11 Replies View Related