Programming A Macro To Select Row Ranges Based On A Formula
May 2, 2009
I'm building a macro thats copying 4 rows of data at a time from a spreadsheet (has 1500 rows of data total) and transposing it to a master spread sheet. There are blank rows in between each entry (the data source I'm using isn't clean), so how can I either have the macro jump to the first row it finds with a value, copy rows until it stops finding a value, paste+transpose into a new document and then repeat the process throughout the document.
If thats too complicated, a macro that finds rows based on a formula would work as well. E.g. Start at row 5, copy+paste+transpose 5-8, start at row 11 (5+6), copy + paste+transpose 11-14, start at row 17 (x+6) ...etc... Here's the code I have developed thus far:
View 4 Replies
ADVERTISEMENT
Apr 29, 2008
trying to select multiple ranges of data at once using variables as my selection range criteria.
I.e., I want something similar to:
Range("A10:A30,B10:B30,E10:E30").Select
But would like to be able to perform the same selection using variables.
StartVar = 10, EndVar = 30
I'm sure it's just a matter of syntax, but I can't seem to get it right.
View 3 Replies
View Related
Aug 1, 2012
I'm trying to set up a way to format column widths and row heights in a macro (so that it can read a value from a cell and format a column to that width). I've used the code below which can be repeated for the number of rows and columns desired below
Worksheets("Sheet1").Range("d1").ColumnWidth = Range("d1")
However, I want to be able to do this on a workbook that could potentially have 40+ sheets. Is there a way of applying this code to operate over the whole workbook rather than just one sheet at a time?
View 7 Replies
View Related
Oct 14, 2009
I need a macro that can set up some named ranges using the text in the header row and the sheet name. The header row will always be in row one, but the number of columns will be dynamic. The amount of rows in the range will need to be dynamic also. To clarify, every used cell stating in row 2 in a column will be the named range with the sheetname+text in row one of the column the actual name.
View 4 Replies
View Related
Oct 3, 2012
I starting to develop a macro for grouping specific information together. part of it I need to group data based on date ranges. My plan was to, in one sheet label the start and end ranges by month (not every range starts and stops at the beginning and end of the month)
For July I would have 7/1/2012 in one cell and in another 7/28/2012
For august I would have 7/29/2012 next to it 8/25/2012, etc
I need to take those ranges and in my FY2013 sheet column I where all of my dates are listed, in the next column J if the date says 7/1/2012 to label it July, if date says 7/30/2012 to label it August, etc.
View 1 Replies
View Related
Feb 18, 2014
I have the following data:
Column A = Date
Column B = Reservations made per day
For ex:
A B
1 3/1/2011 5
2 4/5/2011 10
3 3/8/2011 15
Then I have a look up table where based on the date ranges it assigns a week number.
WeekDATE Range 1Date Range 2
718-Feb-1124-Feb-11
825-Feb-1103-Mar-11
904-Mar-1110-Mar-11
1011-Mar-1117-Mar-11
1118-Mar-1124-Mar-11
1225-Mar-1131-Mar-11
1301-Apr-1107-Apr-11
1408-Apr-1114-Apr-11
1515-Apr-1121-Apr-11
1622-Apr-1128-Apr-11
I am looking for a fomula that would assign a week to the corresponding dates on column A and tha would then add all of the reservations booked for each week.
View 11 Replies
View Related
Apr 9, 2007
I have a spreadsheet with over 1000 rows of information.
There are two columns FROM_ACCT_NO and THRU_ACCT_NO.
I need to create a macro that will give me a condensed account ranges.
Example the first range would be 2000000 to 2000003.
The next range would be 2000005 to 2000298.
And so on, and so on etc....
View 9 Replies
View Related
Nov 17, 2007
What would a macro look like that would find the value in the cell of the last row in the A column, then set that as the selection criteria so macro could copy all rows that match that to another workbook?
View 9 Replies
View Related
Feb 24, 2014
I am looking for a formula that will select a date in the month based on certain criteria. Found the choose function but not sure if I can really get that to work. I basically have a list of clients, with zip codes, restricted days of the week - and would like the system to group them by zip code and select the best day of the month to schedule an inspection but not pick he restricted day. The goal being have zip codes scheduled together - but on a day other than garbage day. Is this even doable?
View 2 Replies
View Related
Oct 16, 2011
Ive got this macro used to search for a particular code in an excel sheet with about 4000 codes, each assigned a hyperlink.
my goal is to make the user enter the hyperlink automatically in the code upon hitting search.
So far this is what i have:
the problem is that it only works with hyperlinks which are assigned a link (right click assign hyperlink) and not codes which work with a formula for example =HYPERLINK("http://www.google.com", "ABC123")
Sub searchsheet()
'Opens box and ask what do they want to search
searchthis = InputBox("Type in a location keyword.", "Property Search")
'Tells where to search
[Code].....
View 2 Replies
View Related
Nov 21, 2012
I am thinking of commanding macro to select worksheet tab based on the system date to do some pasting.
My worksheet tab is as follow:
Nov-12, Dec-12, Jan-13, Feb-13 and .........
What should be the macro script required to select the worksheet tab based on today's date?
View 2 Replies
View Related
Feb 21, 2014
I have a sheet with hundreds of rows of customer information; including a 7 digit customer number. I need a macro to delete all the rows where the customer number sequence start with 1 thru 8 (that would be the first digit of the customer numbers).
View 9 Replies
View Related
Feb 20, 2009
I might be using something completely wrong here, but can anyone tell me if this code is possible or am I being very naive.
H4 and I4 are cells in which I want to enter dates, and then I want these dates to be used in a custom filter on another page.
Below is what my limited understanding of VB came up with.
Sub Date_Range()
Dim First As Date
Dim Last As Date
First = Range("H4").Value
Last = Range("I4").Value
Sheets("Graph Data").Select
Selection.AutoFilter Field:=1, Criteria1:=">=First", Operator:=xlAnd _
, Criteria2:="
View 9 Replies
View Related
Mar 10, 2013
This is what I am trying to achieve:
1) Prompt user to select a file (or multiple files)
2) Copy the files that meet certain criteria to a folder
My attempt (fail):
VB:
Sub FILES2SFTP() Dim FileNames As Variant Dim I As Integer Dim fso As Variant Dim Data As String ChDrive "G:" ChDir "G:TEST" Data = InputBox("Enter the date", "Enter the date", Format(Application.WorksheetFunction.WorkDay(Date, -1), "yyyymmdd")) Set fso = [code]....
I get error 424 object not found in this line:
If fso.getfilename(FileNames(I).Name) = ("Name1" & Data & ".xls" Or "Name2" & Data & ".xls") Then
View 3 Replies
View Related
Oct 25, 2007
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies
View Related
Nov 9, 2009
I have 2 ranges which on their own seem to work fine (I have check by just putting ".Select" at the end of both of them). The issue is that I want to apply the same border format to both ranges, however, when I try to put them together in a "With" statement it includes all of the range from the top to the bottom and not just the 2 two ranges. Ranges being used:
View 2 Replies
View Related
Feb 4, 2014
(1). selecting a specific range to copy that is within a table but starting at a specific row to the bottom of the table. E.g.
Range("C4").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.Copy
(2) finding the last row and then setting as a variable:
Range("D" & Rows.Count).End(xlUp).Select
lLastRow = ActiveCell.Row
View 8 Replies
View Related
Aug 28, 2009
I have a protected worksheet with 60 columns (20 sets of 3), and want to give my users the ability to hide the columns they're not using. There's a row of unprotected cells below the columns in question with data validation allowing a choice of either Show or Hide, and want my macro to act based on thier choices.
Since it's a large spreadsheet, I don't want to run 60 (or 20) different hide commands, if at all possible.
Is there a way to read the 60 different Show/Hide cells (or 20 range names) and join those into a single VB range so I can run the EntireColumn.hidden = True statement once?
View 9 Replies
View Related
Mar 27, 2007
i'm having a really hard time figuring out how to use target. offset to grab a range of cells. For Example:
I am currently running a macro that searches column "D:D" for data. When the data is found, i want to be able to Grab columns D to AG for that row, and apply conditional formatting. It seems like using Target.Offset should be able to accomplish this, but i can't figure out how to specify a range using Target.Offset. Currently, i have to specify each cell i'd like to select, and apply formatting one at a time, which has bloated my code considerably (and causes me to run out of room very quickly).
View 4 Replies
View Related
Feb 9, 2010
The User has made multiple selections with the mouse. The spreadsheet is filtered. The user will usually make different multiple selections on the following columns: A and X through to AR (inclusive).
I just need some code to capture these various multiple selected ranges so that I can copy the selected range as shown below:
View 3 Replies
View Related
Apr 22, 2014
Why the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
View 3 Replies
View Related
Oct 18, 2006
by what means is it possible to unselect randomly selected areas, rows, columns from all sheets?
View 4 Replies
View Related
Nov 19, 2013
I am trying to do something that sounds fairly straightforward but have not been able to achieve the final result.
I have a sheet which has multiple range addresses stored in different cells and so far I have been able to pass the Range address to Range variables by looping through a range array. Now I would like to select these multiple ranges. My code looks as below;
VB:
Dim Cnt As Integer
Cnt = Sheets("Sheet1").(Range("1040").Value ' Cnt holds the the total number of ranges to be specified in Sheet1
Dim RStr(1 To 80) As String ' This will hold the range addresses specified in Sheet1 in cells C1041 to C1120. Upto 80 range addresses could be specified.
[SIZE=2] Dim Rng(1 To 80) As Range ' This will store the ranges based on the range addresses stored in RStr()
Dim i, j As Integer,
[Code]...
I am not sure on how to select multiple ranges using range array hence tried Union() however it is obviously not correct and throws an error.
View 2 Replies
View Related
Dec 4, 2013
If MonthView control can be set to allow users to select multiple ranges and enter different dates into those ranges? I know I was able to do with with the previous Datepicker control and I thought it was as easy as setting the Show Modal property to true.
View 1 Replies
View Related
Dec 12, 2006
This may be a bit of a silly question but any assistance would be much appreciated, as I cannot figure out where I am going wrong:
Dim RRR As Range
Set RRR = Range("c3").End(xlDown).Select
What I am trying to do is to create a dynamic range called 'RRR' so that everytime the macro is run, it makes sure that all the data is selected in the column.
View 9 Replies
View Related
Jul 7, 2008
I have attached a worksheet as my example.
I have been trying to build code and I am a newbie when it comes to this.
I have a sheet that is user entered (Criteria). I need to build a macro/code that says if they choose "Yes" to any of the Products on the criteria sheet, then copy all rows that have an X in them that are in the corresponding column on the Master Template. To make it even more complicated I only want to copy 4 of the columns (ID, Task, Share with Client and Accountable).
I know if they choose multiple columns then I could have duplicate rows, but once all the rows are copied I was going to build a remove duplicates macro. However, if there is anyway of preventing duplicates with the original.
View 13 Replies
View Related
Oct 23, 2009
I need help to get the macros right to do the following that it can not do now:
I would like the user to be able to pause in between input areas and do others things.
Need for the input length to be varible or grow with the information
Are these things possible?
View 11 Replies
View Related
Jun 19, 2008
I have only the basic knowledge of the VBA programming. Are there any books you can recommend?
View 2 Replies
View Related
Nov 18, 2012
I am looking for a code to generate a combinations of x numbers taken 5 at the time. t
View 2 Replies
View Related
Jul 30, 2008
how to type a name into one cell and have all the places in a particular range (a1:H12) that displays that name to highlight a color.
View 14 Replies
View Related
