Select Non-Adjoining Ranges In VBA
Aug 28, 2009
I have a protected worksheet with 60 columns (20 sets of 3), and want to give my users the ability to hide the columns they're not using. There's a row of unprotected cells below the columns in question with data validation allowing a choice of either Show or Hide, and want my macro to act based on thier choices.
Since it's a large spreadsheet, I don't want to run 60 (or 20) different hide commands, if at all possible.
Is there a way to read the 60 different Show/Hide cells (or 20 range names) and join those into a single VB range so I can run the EntireColumn.hidden = True statement once?
View 9 Replies
ADVERTISEMENT
Nov 9, 2009
I have 2 ranges which on their own seem to work fine (I have check by just putting ".Select" at the end of both of them). The issue is that I want to apply the same border format to both ranges, however, when I try to put them together in a "With" statement it includes all of the range from the top to the bottom and not just the 2 two ranges. Ranges being used:
View 2 Replies
View Related
Feb 4, 2014
(1). selecting a specific range to copy that is within a table but starting at a specific row to the bottom of the table. E.g.
Range("C4").Select
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Selection.Copy
(2) finding the last row and then setting as a variable:
Range("D" & Rows.Count).End(xlUp).Select
lLastRow = ActiveCell.Row
View 8 Replies
View Related
May 19, 2008
Is there a formula that will enter the current date in a cell A1, when I enter text into the adjoining cell A2? I'm creating a log with notes and would like the current date to just appear when notes are entered in a cell.
View 9 Replies
View Related
Mar 27, 2007
i'm having a really hard time figuring out how to use target. offset to grab a range of cells. For Example:
I am currently running a macro that searches column "D:D" for data. When the data is found, i want to be able to Grab columns D to AG for that row, and apply conditional formatting. It seems like using Target.Offset should be able to accomplish this, but i can't figure out how to specify a range using Target.Offset. Currently, i have to specify each cell i'd like to select, and apply formatting one at a time, which has bloated my code considerably (and causes me to run out of room very quickly).
View 4 Replies
View Related
Oct 27, 2008
We have many spreadsheets in my lab. We have been using them for YEARS. Two days ago we ran into a bizarre problem. If we copy a formula and paste into adjoining cells we get the following
Init Values Formula copied & Pasted Results in B column
A column B Column
10 =A1* 10 100
15 =A2*10 100
20 =A3*10 100
If you copy Range("B1") and Paste it to Range("B2:B3") you get 100, 100, 100 NOT 100, 150, 200. If you click on range("B2") it says =A2*10 but the value 150 does not appear in the cell. If you manually type a formula into each line, the results are what one would expect. If I open a new workbook, copying and pasting works as always.
View 3 Replies
View Related
Sep 18, 2009
I would like to compare each cell in a spreadsheet to the cell on its right.
If the numeric value of a cell is less than the numeric value of cell on its right, I would like to highlight the cell on the right light red.
Maybe a better way of putting that is if the value of a cell is greater than the cell on its left, highlight it light red (The problem I foresee with this formulation is in the first row where there are no cells to the left).
View 8 Replies
View Related
Nov 13, 2006
i run a Excel spreadsheet that adds payments that are made, and i have a row put there so i can make notes. sometimes these notes are quite long and if the cell to the left of it is empty the text will continue going across these cells and make my spreadsheet a real mess to understand. how do i make text stay only in it's given cell?
View 2 Replies
View Related
Feb 9, 2010
The User has made multiple selections with the mouse. The spreadsheet is filtered. The user will usually make different multiple selections on the following columns: A and X through to AR (inclusive).
I just need some code to capture these various multiple selected ranges so that I can copy the selected range as shown below:
View 3 Replies
View Related
Apr 22, 2014
Why the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
View 3 Replies
View Related
Oct 18, 2006
by what means is it possible to unselect randomly selected areas, rows, columns from all sheets?
View 4 Replies
View Related
Apr 29, 2008
trying to select multiple ranges of data at once using variables as my selection range criteria.
I.e., I want something similar to:
Range("A10:A30,B10:B30,E10:E30").Select
But would like to be able to perform the same selection using variables.
StartVar = 10, EndVar = 30
I'm sure it's just a matter of syntax, but I can't seem to get it right.
View 3 Replies
View Related
Apr 21, 2009
I have a list of items in column A of Sheet1 and the same list in column A of Sheet2. Both list will contain the same items, however not necessarily in the same order.
What I want the book to do is; when I click on an item in the list on Sheet1, it takes me to the same item in Sheet2.
Is this possible with VBA?
View 10 Replies
View Related
Dec 19, 2007
I have a list of 688 codes in a column (lets say column A). e,g 23, AB, FX, NV, D8. Each code corresponds to a text In the next column (lets say column B) for example AA is the code for "Transmission". Using a clean spreadsheet and using a drop down list, I would like the cell to the right of the selected dropdown code, to automatically fill in the text of what the code corresponds to.
View 5 Replies
View Related
Nov 19, 2013
I am trying to do something that sounds fairly straightforward but have not been able to achieve the final result.
I have a sheet which has multiple range addresses stored in different cells and so far I have been able to pass the Range address to Range variables by looping through a range array. Now I would like to select these multiple ranges. My code looks as below;
VB:
Dim Cnt As Integer
Cnt = Sheets("Sheet1").(Range("1040").Value ' Cnt holds the the total number of ranges to be specified in Sheet1
Dim RStr(1 To 80) As String ' This will hold the range addresses specified in Sheet1 in cells C1041 to C1120. Upto 80 range addresses could be specified.
[SIZE=2] Dim Rng(1 To 80) As Range ' This will store the ranges based on the range addresses stored in RStr()
Dim i, j As Integer,
[Code]...
I am not sure on how to select multiple ranges using range array hence tried Union() however it is obviously not correct and throws an error.
View 2 Replies
View Related
May 2, 2009
I'm building a macro thats copying 4 rows of data at a time from a spreadsheet (has 1500 rows of data total) and transposing it to a master spread sheet. There are blank rows in between each entry (the data source I'm using isn't clean), so how can I either have the macro jump to the first row it finds with a value, copy rows until it stops finding a value, paste+transpose into a new document and then repeat the process throughout the document.
If thats too complicated, a macro that finds rows based on a formula would work as well. E.g. Start at row 5, copy+paste+transpose 5-8, start at row 11 (5+6), copy + paste+transpose 11-14, start at row 17 (x+6) ...etc... Here's the code I have developed thus far:
View 4 Replies
View Related
Dec 4, 2013
If MonthView control can be set to allow users to select multiple ranges and enter different dates into those ranges? I know I was able to do with with the previous Datepicker control and I thought it was as easy as setting the Show Modal property to true.
View 1 Replies
View Related
Dec 27, 2012
I have a spreadsheet with sales which I colour green when they are outstanding and red when they are despatched. I would like to automatically add a 1 in an adjoining column when the cell is green (eg outstanding) or zero when they are despatched so that it totals up the number of outstanding orders.
a b
172.95 (this column would be green)
024.00 (this cell would be red)
124.00 (this cell would be green)
132.25 (this cell would be green)
View 3 Replies
View Related
Jan 9, 2014
I would like to be able to enter the data into the grey cells and then have the yellow cells auto generate a result. The only problem is that the required value in cell B5 is from when the entered value in B4 is looked up in the table, rounded UP to the next highest value and then the answer from the next cell.
So, if I enter in B4 a value of 500, a lookup is made in the table and the next highest value would be 553 with the correct answer shown in B5 being 13.
View 2 Replies
View Related
Oct 25, 2007
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies
View Related
Feb 26, 2010
definitions for static ranges and dynamic ranges?
View 9 Replies
View Related
Oct 30, 2012
I have a multiselect listbox with values that gets populated from a sql statement, and I would like to get is the first or second index from the selected item. I know how to get the listindex from a combobox by using:
VB:
cbnumber.List(.ListIndex, 0)
How can I loop through and get the 1st index number for the selected items only from the listbox? I want to pass this index number to another sql statement.
View 5 Replies
View Related
Mar 7, 2013
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
View 1 Replies
View Related
Jul 7, 2008
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies
View Related
Oct 4, 2007
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
View 9 Replies
View Related
Nov 16, 2006
I need to get a macro to select all the data in column "A", sort it in ascending order, omit the blanks if any, then select (highlight) all the data so that another macro can be run.
When I record it, it will only record up to the last row I highlight but the data always changes so there could be more or less.
View 9 Replies
View Related
Aug 13, 2007
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
View 9 Replies
View Related
Nov 1, 2006
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
View 9 Replies
View Related
Oct 28, 2008
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies
View Related
Apr 28, 2014
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
View 6 Replies
View Related
