VLOOKUP In VBA Where Lookup Range Is From The Sheet To Right
May 16, 2014
I am writing the code for a VLOOKUP in VBA..I was using the .Formula = "=VLOOKUP(LookupValue, LookupRange , Column No, 0 )"
But, the problem is that the LookupRange is to be done from different sheets everyday as the name of this sheet is going to be like 16th May,17th May etc.
The common thing is that this sheet is the adjacent sheet next to the one in which we are trying to get the VLOOKUP work...so what solution can i use.
View 12 Replies
ADVERTISEMENT
Apr 7, 2009
Formula is on Sheet1 and table array is on Sheet1
but the lookup value is on Sheet2 in Cell B15
Below does not work, either does anything I have tried.
=VLOOKUP(Sheet2!B15,B138:E161,4,FALSE)
View 9 Replies
View Related
Sep 4, 2012
Is there a way that I can do a vlookup in 1 file and specify more than 1 data range to lookup the data in?
In this case I have one file to put the vlookup in and a second file with more than 1 tab and I want to have it search each of those tabs and return the result. The format of these sepatate tabs are to each other and for that matter, identicle to the main file.
View 1 Replies
View Related
Jan 18, 2010
One other common problem is storing the Lookup Function on another sheet to the Table. On The Uploaded Workbook. Is it possible to change the Vlookup to the same worksheet as the lookup list to remove the disadvantage of having them on separate worksheets. If I have misunderstood the statement in the quote above.
View 2 Replies
View Related
Oct 27, 2011
I need to make a VLOOKUP in a sheet which I do not own or control the layout of. Therefore I cannot add any columns in the source to assist me in my lookup.
My VLOOKUP needs to look at two values/columns since the value in one column is not a unique identifier. This is easy in the value I want to lookup but not so easy in the lookup range in the source sheet. Ideally I would like to write my formula something like this:
=VLOOKUP(A2&B2;CONCATENATE('[OtherWorkbook.xlsx]Sheet1'!$M$2:$M$9;'[OtherWorkbook.xlsx]Sheet1'!$N$2:$N$9);2;FALSE)
View 9 Replies
View Related
Jan 8, 2009
I would like to do a vlookup where the lookup value isn't in the first column of a range/table. Would I use index/match? For example, I have fields for vendor, part # and location in that order. I'd like to pull up location with a formula based on part #.
View 4 Replies
View Related
Apr 9, 2009
As I copy and past my lookup formula down the page it is changing the lookup range which I think is what is giving me so many #N/A results. My first Formula is
=IFERROR(VLOOKUP(A2,Coors2!A2:D3765,3,FALSE),IFERROR(VLOOKUP(A2,'AB2'!A2:C13944,3,FALSE),(VLOOKUP(A2 ,'WM2'!A2:C4843,3,FALSE))))
Then for instance at line 59 the formula is
=IFERROR(VLOOKUP(A59,Coors2!A59:D3822,3,FALSE),IFERROR(VLOOKUP(A59,'AB2'!A59:C14001,3,FALSE),(VLOOKU P(A59,'WM2'!A59:C4900,3,FALSE))))
View 2 Replies
View Related
May 27, 2008
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
View 7 Replies
View Related
Mar 26, 2008
Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?
View 9 Replies
View Related
Sep 27, 2011
I have a query on retrieving the result from a set of range from other sheet.
Query: In the Sheet1 Column B has to take first two words from the
Column A & lookup the matching results from Sheet 2.
(The search range should be the first two words of each cell)
Result: The complete sentance in the Cells (First Two words) should get placed in the Sheet1 Column B
Example: The Expected result should be as mentioned below. (Blue in color should be the results)
Sheet1A BC1NameResults2abc def fkfeabc def words3ghi jkl kikgN/A4mno pqr stu lkasmno pqr must work5
Don't give my book don't give up6vwx yzyvwx yzy not7xwv uts rqpxwv uts yes8omn lkjN/A9ihg fed cbaN/A
Sheet2A BC1Lookup Data2abc def words3xxxghi jkl4yes you have to5don't give up6no you will not7mno pqr must work8vwx yzy not9Excel work10xwv uts yes11omn mre lkj12ihg not fed 13not work14
This is my query
View 7 Replies
View Related
May 21, 2006
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
View 4 Replies
View Related
Jan 22, 2014
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
View 3 Replies
View Related
Feb 12, 2014
I have a worksheet with following values:
A
B
C
1
Shorts
75
[Code]...
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
View 1 Replies
View Related
May 30, 2009
i am using Vlookup in all My files and the 4Th argument i put it 0 to give exazct result
My Question
Lookup Function give the Exact or approximate match and as i know Vlookup give the first result but Lookup give the last result
View 9 Replies
View Related
Jan 28, 2009
In my workbook I have multiple sheets but I'm attaching a very simple workbook to demonstrate what I'm trying to accomplish. In my "Lookup" tab/sheet. I want to have known Latitude and Longitude data that will exist in columns A&B. Columns C & D will have address numbers and Street Name. I would like my lookup formula to find the longitude and latitude data from my "lookup" sheet, when the matching address information is typed in, in my 2009 sheet. I have to keep the street numerics and street name separate on this worksheet as well. I believe I'll need two separate lookup formulas as I need these formulas to start in cell G4 & H4 in my "GeoCoding1" sheet. Is it possible to have four columns of data to be viewed in a lookup formula? I tried this formula in cell G4 (GeoCoding1 sheet)
View 3 Replies
View Related
Apr 5, 2007
I want to match two different values in the same row and then have it return another value in that row.
View 9 Replies
View Related
Jan 29, 2009
I have a tab with the following on:
Australia
SOME VLOOKUP FORMULA
SOME VLOOKUP FORMULA
I then have another tab which is similiar to this:
Australia Danny 23
Australia David 25
Canada Ben 35
Basically what I want is....where ive put some formula I want to lookup the title, in this case australia which is the cell above, search within the table then enter the name to the right of that. I have done this, however it only ever uses the first name on the list..... Example i always get danny on a role, i have managed then to get it to say david underneath but then if i copy the forumla down again it continues with danny, david etc.
View 4 Replies
View Related
Nov 21, 2005
Is there a way to perform a vlookup with two lookup values?
I'd like to look up the value of A1 and B1 in a table with A1 and B1 values
included to return cell C2 from the table. I've had limited
succcess using concatenate and then using vlookup on that cell but i'd like
to not have to do the concatenate step.
View 10 Replies
View Related
Mar 4, 2009
I have a table that has, amongst many columns, a year, month and a name column.
I want to do a formula that takes in 3 values (name, year, month) and returns a sum of values found in a variety of other columnswhere these 3 values are matched.
I would know how to do this in SQL but wonder if Excel can do this type of thing on one large data table?
View 9 Replies
View Related
Dec 29, 2006
I am using vlookup to find the ORIGIN data and DESTINATION data but the subheading is the same for both- see below(site name, city...). How do I find the second occurrence for the same heading?
Is there another command that would be better?
col A col B
Line#1ORIGIN INFO:
Line#1 CONTACT NM
Line#1 CONTACT PH#
Line#1 CONTACT EML
Line#1 SITE NAME
Line#1 ADDRESS
Line#1 CITY
Line#1 ST ZIP CTY
Line#1 DAY&WINDOW
Line#1 LIVE/DROP?
Line#1DESTIN INFO:
Line#1 CONTACT NM
Line#1 CONTACT PH#
Line#1 CONTACT EML
Line#1 SITE NAME
Line#1 ADDRESS
Line#1 CITY
Line#1 ST ZIP CTY
View 5 Replies
View Related
Apr 11, 2007
=VLOOKUP(C29,'Zero Days YTD'!B:Q,16,FALSE) is my current formula where C29 = Jack Bates.
As of this month Jack Bates is now in two places on worksheet Zero Days YTD. One is named "Jack Bates (from AMU 3/1/07)" and the other named "Jack Bates (to APU 3/1/07)"
I tried =VLOOKUP("Jack Bates (from AMU 3/1/07)"&"Jack Bates (to APU 3/1/07)",'Zero Days YTD'!B:Q,16,FALSE), but that didn't work.
View 3 Replies
View Related
Feb 14, 2014
accomplish VLOOKUP for multiple instances of a same Lookup value
First let me explain about my file:-
Table~1:-
1.B2:B19 I have list of items which required to build a product
2.D2:D19 I have list of shortages against each item
3.C2:C19 I have list of dates when each item shortage will get fulfilled
Table~2:-
1.C22:C31 I have picked the largest 10 different dates from Table1 by using LARGE formula.
Against each date which is update C22:C31, respective shortage qty has to get VLOOKUPED.
When there is a same lookup value, it has to keep pick next value (Shortage Qty) for same date.
View 2 Replies
View Related
Dec 3, 2009
I'm trying to get a result of all rows in a table that has the same lookup value.
For example:
David25
Brian40
Steve57
David68
David902
John11
Gerry3
I want to look for David and that the result will be all rows that starts with David:
David 25
David 68
David 902
I tried using vlookup but it always returns the first row.
View 3 Replies
View Related
Aug 21, 2013
know if I can use a wildcard on R1C1 notation for my "lookup value" in my Vlookup, so that the Vlookup searches for a not exact match, but on the whole contents of the cell, not just the first several letters? I am using VBA, and the vlookup is in each cell of a for next loop, so I cannot use an actual cell reference which is where I've usually seen, and used wildcards. I've tried changing the Vlookup to have the lookup value be "Cells(n,2)" instead of "RC[-2]" to no avail. I need to make the vlookup evaluate all the words in cell "RC[-2]" prior to returning the value I specified, because otherwise it returns the wrong value even though I sorted my lookup table Column A A to Z.
Start Date
End Date
Event ID
"Trans-Pacific Melodies" : an East-meets-West concert presented by Carolina International Orchestra and the China National Orchestra
10/06/13
10/06/13
22297
[code]....
View 1 Replies
View Related
Oct 25, 2013
I have a cell that I must remove the first 2 characters "RO" for each value in a column on a sheet called RAW DATA and put into a cell on a sheet called ROSS DATA. Some of the values in that cell have 3 digits after the RO and some have 5 digits. To do that I used
=REPLACE('RAW DATA'!A3,1,2,"")
Then I need to use this new resultant string as the lookup value in a VLOOKUP. The VLOOKUP will be looking at a named range called DAP on a sheet called DAP, in column 5 for an exact match and I need it to return that value to the cell.
I have tried using the indirect to no avail in different ways, and not sure that I fully understand the usage.
View 9 Replies
View Related
Mar 14, 2007
The formula I'm using is: =VLOOKUP($B724,Sheet1!$A$2:$S$17120,6,FALSE)
The B column in the lookup value has been both TRIMmed and VALUEd. The column that would contain the matches in Sheet1 has also been TRIMmed and VALUEd. I've confirmed that if I manually search for my value in Sheet1 then I find the data I'm looking for, but I always get #NA when this is run.
I have successfully done other VLOOKUPs between different columns in these worksheets, but can't get this one working. Excel version is 2003 SP2 if that makes a difference.
View 9 Replies
View Related
Oct 29, 2008
This formula works perfectly except when worksheet 2 has a code that is not on worksheet 1, then I get the error #N/A. I understand why I get the error, but not how to fix it. Obviously some sort of nesting - but what and how?
What I want on worksheet 2, column I - if there is a code on worksheet 2 but not on worksheet 1 - a return of "N/A"...
View 9 Replies
View Related
Jan 8, 2009
ABB
MetricsCategoryJan 2008VisitsTravel50view_offerTravel10
Above is the data I want to lookup on. I need to be able to do a lookup for travel visits and a seperate lookup for travel view_offers.
Is there someway to do this with a vlookup or maybe match index?
View 9 Replies
View Related
Oct 3, 2006
After dumping the Showcase Query result into an Excel file I am using a vlookup to insert data. My problem is that the vlookup won't find results unless I actually click on the cell that contains the lookup value to activate it. I have tried formatting the cells (both lookup and the return value) as general and text and nothing works (which makes my macro usless if it requires user intervention).
View 3 Replies
View Related
Apr 6, 2008
i have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table
RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6.
this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have
B6=OFFSET(Data!$A$1,A6,1)
B7=OFFSET(Data!$A$1,A6,2)
B8=OFFSET(Data!$A$1,A6,3)
and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats"
2, it comes up with multile .. irrelevent results.
View 10 Replies
View Related
