Search For Values Between Two Columns
Jul 13, 2014
I need a formula that matches a number on Sheet1 with a number on Sheet2. Sheet1 contains 7 columns of numbers. Each column corresponds with the same column on Sheet2 if the number on Sheet1 column 1 can be found in Sheet2 column 1 then the result is True. If the number is not found in Sheet2 column 1 then the result is False. This same criteria would apply to columns 2 through 7 as well.
The formula would start by selecting a number in Sheet1 that corresponds with the formula column and then scan the entirety of the matching column on Sheet2 for that number. If it is found in that column the result is TRUE.
Sheet1 H3 corresponds to Sheet1 A3 scans all of Sheet2 column B for the value in A3 if it's in Sheet2 column B the result in H3 is True if it's not then the result in H3 is False.
EXAMPLES:
Sheet1: column heading 1 - (A3) = 2223333333
Sheet2: column heading 1A - (B72) = 2223333333
Result H3 = TRUE
Sheet1: column heading 1 - (B3) = 222333333314
Sheet2: column heading 1A - (C67) = 222333333314
Result I3 = TRUE
Sheet1: column heading 1 - (C3) = 222333333332
Sheet2: column heading 1A - (D61) = 222333333332
Result J3 = TRUE
Sheet1: column heading 1 - (D3) = 222333333321
Sheet2: column heading 1A - (E62) = 222333333321
Result K3 = TRUE
Sheet1: column heading 1 - (E3) = 222333333331
Sheet2: column heading 1A - (F65) = 222333333331
Result L3 = TRUE
Sheet1: column heading 1 - (F3) = 222333333351
Sheet2: column heading 1A - (G70) = 222333333351
Result M3 = TRUE
Sheet1: column heading 1 - (G3) = 222333333352
Sheet2: column heading 1A - (H69) = 222333333352
Result N3 = TRUE
I've attached a workbook with examples : match_numbers.xlsx‎
View 3 Replies
ADVERTISEMENT
Mar 4, 2014
I need one formula to copy and paste the checkcard data changing it from this "CHECKCARD XXXXXX5623" to "CHECKCARD 5623", but I need one formula to look for multiple known checkcard numbers. I will have more then one typically in the bank download so I need to search and copy at least two known numbers as shown below.
I am providing the formula that I am using right now, "=IF(ISNUMBER(SEARCH("5623",B3)),RIGHT(B3,41),"")" but it only works for one checkcard number? Also I don't really need to capture the DEBIT or CREDIT that will always be at the end, it would be redundant. If it's easier to write the formula including that data that is no problem. What I want to copy and move into an adjacent cell is in red.
Here is the source data:
Row 2 - SONIC DRIVE IN#1531 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX5623 DEBIT
Row 3 - JASON'S DELI # 125 Q64 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX9718 DEBIT
View 4 Replies
View Related
Apr 17, 2013
I have a workbook that has worksheeets for every day of the month. The data in the worksheet consists of columns (employee #, name, clock in/out times, and break penalty).
What I am trying to do is create another worksheet that searches all the other worksheets for a "yes" in the "break penalty" column and then create a list of all the employees that received a break penalty for the entire month. I would like this to be able to auto populate throughout the month as data is entered and not have to use a filter every time I want to compile this list.
View 3 Replies
View Related
Mar 25, 2014
Find button in Spreadsheet. My problem is I wish to only search 2 of the columns on my sheet.
I have been trying to locate info on my own, see here: [URL]
But I cannot seem to find anything showing how to specify where to search.
Here is the code I am using
[Code] ......
Want to search columns G and J -OR- Search entire sheet but ignore Columns A and B ...
View 2 Replies
View Related
Mar 22, 2012
I have a list of names in column C and a list of Codes in column A. I have a unique list of the names from C in column M and a unique list of codes as headers in N1 through S1. A name will be used several times in column C But will only match a code in column A one time. My codes are: In, Out, Shop, ConfRoom, Libr, Musm, and Thrtr. How can I search the name and code and get the time from column E and put it in the appropriate cell. I can concatenate everything and do a VLookup but that would be several thousand rows.
View 3 Replies
View Related
Jul 28, 2012
The first tab of the excel sheet called 'Data' displays information on the years that 2 countries traded with one another. For example, from the years 2005-2010, Belgium traded with multiple countries (Australia, Brazil, Canada, Chile). However, there could have been one year or multiple years where it did not trade with a particular country (e.g. in 2006, it may have skipped trade with Chile).
What I'd like to do is basically create a function that searches through the data and returns a 1 if Belgium traded with a particular country each year from 2005-2010 and a 0 if it did not. So, for instance, because Belgium traded with Australia, Brazil, and Canada in all 6 years, the function would return a 1. But, because it did not trade with Chile in all 6 years, it will get a 0.
The second tab called 'Results' displays what I'd like it to show. I've tried using if statements (but they don't work with text), vlookups, match, index .
View 2 Replies
View Related
Mar 19, 2014
I need to search multiple columns to find a match before I want the result selected which itself will be in a different column.
It seems to me to be an extension of the VLookup function. Attached is an example of the sort of spread sheet I am trying to pull data from. I am trying to get the result of Area 5G, for site ZZ, KPI 2.1, Date Apr-13. As well as the result for Area 5G, Site (empty), KPI 2.1, Date May-13. I hope this is not to convoluted
View 14 Replies
View Related
Mar 9, 2009
I want to search Column A in sheet1 vs column B in sheet 2. If there is a match, i want copy Column B in sheet 1 and PASTE it to Column E in sheet2. I have a macro (helped by those on here ) that will find the duplicates and copy cells from the cooresponding row only to another sheet.
The tricky thing is, the macro I have makes a complete new sheet. I want to copy the data to column E on sheet2 ONLY if there is a match for that cell. If ther eis nto a match i dont want it to put anything.
View 3 Replies
View Related
Apr 5, 2014
I need to find the fruit name in the table, and then reference the color from the corresponding row's Column G value. I have experimented Match, Index, Sumproduct, with no luck. Do I need to somehow nest with a VLookup?
Range A1:F4 Fruit Color (Col G)
VeggieVeggieApple VeggieVeggieVeggie Red
ClementineVeggieVeggieVeggieVeggieVeggie Orange
VeggieVeggieVeggieVeggieBananaVeggie Yellow
VeggieVeggiePear VeggieVeggieVeggie Green
Name Color From Col G
Apple Use formula to pull "Red"
Clementine
Banana
Pear
View 4 Replies
View Related
Aug 2, 2007
I have the following code below, im not sure how to modify it to make it only search 2 columns of information, how can do this?
Private Sub CommandButton3_Click()
Dim StrFindWhat As Range
Dim NextCell As Range
Dim WhatToFind As Variant
WhatToFind = Application.InputBox("Please enter the Application or Service you want to search for?", "Search", , 500, 80, , , 2)
If WhatToFind "" And Not WhatToFind = False Then
For Each oSheet In ActiveWorkbook.Worksheets
oSheet.Activate
oSheet.[b4].Activate.....................
View 9 Replies
View Related
Jun 10, 2009
I have 2 columns of data (Column A and Column B).
I would like to be able to search the two columns and see if any of the data repeats in either column. Here's an example:
15844721565538
15907771565575
15936501574897
15946991576501
15970061576502
16095501578841
16124741578842
16124781578843
16124821578844
16166161578954
1616781 1616781
The list is much longer than this. I need a formula or whatever that would scan both lists and say, nothing matches, or 1616781 matches or highlight the matches or whatever, just so long as I don't have to go down the entire list multiple times.
I would have downloaded Htmlmaker and provided a glimpse that way, but the web site is blocked here at work.
View 9 Replies
View Related
Nov 26, 2006
=INDEX('Cost Table'!$A$4:$C$305, MATCH(A1308,'Cost Table'!$C$4:$C$305,), MATCH("Item Description",'Cost Table'!$A$4:$C$4,))
I have the above formula to search a worksheet for an item description. It looks for a part number in one column. I need to now search two adjacent columns (maybe more down the road), can I adjust this to do that?
View 9 Replies
View Related
Jun 14, 2007
I have this situation
On the first tab there is a list of IDs
45
676
234
451
788
On the second tab there are thousands of IDs in 3 columns (A,B,C)
What should be the best way to click on the button on the firs tab and see 'yes/no' whether ID exists in second tab in any column ?
View 9 Replies
View Related
May 26, 2006
Given the following data located in Sheet1 of a Workbook -
•I have seven columns (assume header row names are “A, B, C, D, E, F, G”) each containing numeric data in random order.
•All columns are of the same length (equal number of rows), followed by a blank cell, but the number of rows is unknown.
•Columns with header row names A-E will only contain numbers from 0 to 100, while F and G may contain numbers from -127 to +128.
Here is what I would like to do –
I would like to be able to analyze the data in columns A-D to locate rows that contain specific combinations of values (ex. row 41 contains the values 50, 0, 0, 0 and row 239 contains values 100, 0, 0, 0 in columns A – D, respectively, etc.).
For each row that is found to contain one of these combinations (there are many different combinations required), I would like to copy the associated values from columns E, F, & G for that row, and paste them into their respective (E, F, & G) columns located on Sheet2 of the same workbook. However, I would like to paste the E, F, & G values into a specific row order on Sheet2, DETERMINED by the value of the A – D combination identified on Sheet1.
Continuing with the ex. above, let’s say I would like to have the EFG values from row 239 in Sheet1 copied to row 10 in Sheet2, while the EFG values from row 41, Sheet1, are to be copied to row 11 in Sheet2.
In effect, I would like to create a table of this subset of data, in a specific order, from which I could work later.
I can do this manually using “ AutoFilter” to locate the data I need and then write formulas to copy the data from Sheet1 to Sheet2 in the order that I need, but every time the order of the original data on Sheet1 changes I have to start all over.
View 9 Replies
View Related
Feb 10, 2009
It always hassles me to have to change the default setting of FIND to search by Columns instead of Rows.
My question is simple: Is it possible to change the default setting so that every time I use FIND it will search by Columns by default???
View 2 Replies
View Related
Apr 14, 2009
I recently posted a similar thread which was very well supported but I couldn’t get a solution because my requirements were not clear enough. I would like to try again with a slightly easier and clearer requirement.
I would like a spreadsheet that compares and searches columns for text and returns true if a duplicate is found.
It is similar to a lottery checker except the lines being checked could be a string instead of a single character.
I have attached a spreadsheet which helps explain what I’m trying to achieve.
Basically, a user can sequentially enter a single character to cells F1:F5. These values are then compared to columns A:C. If one of the columns contain the values in column F then return true to G1.
View 2 Replies
View Related
Feb 26, 2009
I have an excel spreadsheet with:
2 sheets,Sheet1 and Sheet2
4 columns (A,B,C,D)
100,000s of rows.
I need to search 3 columns, B,C and D, for particular values.
Column B needs to be = 0
Columns C and D need to be "<=0.1"
When all three criteria in the row are matched I need the value from column A in that row to be pasted to Sheet2 and then for the macro to continue searching the rows.
I have attached an extract of the data as the files size is too large to upload.
View 10 Replies
View Related
Oct 16, 2012
show me a formula using the criterias under Column E so that cell F2 will return the result as "202 IR" and cell F3 will return the result as "654 CC"? the data is saved over three different columns
A
B
C
D
E
F
Class1
Class2
Class 3
Staff #
Staff & Class
125 CC
758CC
1214 CC
202
123 IR
213 CC
2314 IR
654
456 IR
202 IR
654 CC
View 8 Replies
View Related
May 12, 2014
Trying to create a dynamic vba code that searches the second last active column for a particular criteria. In this case it is the value "901".
If the criteria is met it will search the row to see if value is >=0 then change to zero where applicable.
In the example, I have a loop which searches Column 6 for the matching criteria. I want to change from Column 6 to "second last column" which is Dynamic to allow for more column to search through.
The two codes below search through column "A" and Column "B". Is there anyway to make this Dynamic also so it searches from Column "A" to the 4th Last Active Column.
So the Column to check for Matching Criteria is "Second Last Column" The Data to Loop through will be from Column A to the "Fourth Last Active Column".
Public Sub ChangeCellValue_TwoConditions_ColA()
Dim Last_Row As Long
Dim iLoop As Long
Last_Row = ActiveSheet.Range("A65536").End(xlUp).Row + 1
For iLoop = Last_Row To 1 Step -1
If (trim(ActiveSheet.Cells(iLoop, 1).Value) >= 0) And (trim(ActiveSheet.Cells(iLoop, 6).Value) = "901") Then
ActiveSheet.Cells(iLoop, 1).Value = "0"
[code].....
View 3 Replies
View Related
Sep 27, 2007
I have Column Headers in Row 1 (except column A), What I need to do is write a Macro or some code to
1.Search the entire row 1 for column headers containing the suffix _CSV and delete the entire columns.
2.Shift all remaining columns to the left so no blank columns exist. (There is a time stamp in row A that I wish to keep where it is.)
Next I would like a separate routine to sort the columns in the order of a Pre-defined list that I specify in a range. For example the list of column headers reside in the Range (A1:A200)
View 9 Replies
View Related
Sep 24, 2008
I'm trying to make vba, that takes one value(special code, up to 13 car long) from sheet4 column i1 and searches the match from sheet2 columns E:M. And when match is found, copies from sheet4 column K1 value(the same row where the code was taken from) to found match sheet(in this case sheet2) in column Q (the row must be the same where match was found)
If this maters, columns E:M may be hidden on sheet2, or E1 may be only one that's shown.
And has to loop until the end of the sheets.
By the way - i've got up to 150000 rows..
View 9 Replies
View Related
Dec 12, 2008
I am trying to create the ability to search for a word in specific columns. In my case below I want to search D5:E500 but it's not working. It searches the whole ppage.
Private Sub searchfind_Click()
Dim searches As String
searches = searchfirstname & searchlastname
If WorksheetFunction.CountIf(Range("D5:E500"), searches) = 0 Then
Exit Sub
End If
Cells.Find(What:=searches, After:=ActiveCell, SearchOrder:=xlByRows, SearchDirection:=xlDown, _
MatchCase:=False, SearchFormat:=False).Activate
End Sub
View 9 Replies
View Related
Feb 23, 2007
I have an XLS sheet filled with every zip code in the US... the zips are in multiple columns adjacent to columns with the corresponding county names.
Unfortunately, the there are up to EIGHTEEN columns of zip codes in each row describing the counties... not one zip per row. I'm assuming this was done to save space.
In another sheet, I have list of client zip codes and need to VLOOKUP the corresponding county from the first sheet. I'm certain I'm not using VLOOKUP right...I'm getting #N/A every time.
Is this because it's only checking the first column of zip codes? I need it to check all 18 columns of course... there are no repeated zips.
How do I do this without rebuilding the full zip database page?
View 3 Replies
View Related
Oct 13, 2008
I'm trying to compare values in 2 separate columns to see how many times the same value appears in both columns. Ideally I would be able to insert a range function to compare the values in the column "ID 1" against the values in column "ID 2" and return the count of times that a value appears in both columns. For example 2122, 1112 and 1718 appear in both columns and I would like the formula to return a count of 3.
ID 1ID 2
12342122
45671112
89101718
11122678
13144544
15162324
17189987
19201215
21221928
1976
2576
2345
4678
In my actual project I'm comparing 2 columns in the same worksheet. The column are column B with data in cells B2:B10266 against column C with data in cells C2:C18560.
View 4 Replies
View Related
Mar 22, 2012
adapting the bolded code to search for a specific row where the date displayed in "DAT2" (a date in Column A) occurs in the same row as specific data (e.g CEF1) in column B (note that there will only ever be one combination like this on the worksheet but it could occur in any Row) and then display just that result in "Experimental".
Private Sub CommandButton1_Click()
Unload Me
Dim CellFound As Range
Dim Rng As Range
Dim Wks As Worksheet
If TextBox1 = "" Then
MsgBox "You must enter a Date to Find."
Exit Sub
End If
[code]......
View 1 Replies
View Related
Apr 9, 2008
I am looking to write a search function that searches through a whole document. The only examples I can find are of a could different search functions but they all are searching an specified individual column and even then I didn't really understand them. My worksheet has 6 different columns which are all different labels for a certain tool. I want the user to be able to input any of those 6 labels and have all the information in that row be returned.
View 4 Replies
View Related
Mar 23, 2009
I tried both IF and LOOKUP and failed. I'm trying to search for values from one worksheet and identify whether or not those values exist in another worksheet. I attempted the following lookup in field A2:
=LOOKUP(B2,Sheet3!A$2:A$914,Sheet3!C$2:C$914)
B2 (thru B5000 or so) contains values I want to search for; sheet3!A$2:A914 is where I want to look and column C of that same sheet, entered the text "Yes" in an attempt to have the results list "Yes" for hits and N/A for misses. (All fields are text.) I copied the formula all the way down the sheet in column A. The result it is returning is N/A in A2 and Yes in A2 -to the bottom, which is incorrect.
View 2 Replies
View Related
Mar 22, 2013
I am working on a time management sheet for my company. I need to be able to click a button and have the file search 3 columns for a persons initials and then hide all the rows where the initials are not in at least one of the three columns. I seem to have no problem getting it to work for one column at a time, but as soon as I try to search more than one it all falls apart.
I will also need to create an unhide all button to reset the sheet after the macro has been run.
I have attached a sample of the sheet below. Each project needs to have 3 rows to show the schedule and budget broken down by each team member.
Project Number
Address
Service
PM
SS
[Code]....
View 5 Replies
View Related
Apr 21, 2014
I am creating a database using excel and I've created a userfrom for ease of data entry and searching the database. But now I am stuck at the searching part.
The sheet is Sheet1 and the userform is UserForm1. Based on the pic that i have attached, user needs to key in the keywords in any of the textboxes and comboboxes in the group box labelled "Organizational detail" and when he/she clicks on the Search button, the userform will display the whole rows where the search results reside onthe listbox. When the user click on the search results on the listbox, the textboxes and comboboxes will be updated with the data on the listbox.
View 3 Replies
View Related
Nov 12, 2006
I would like to search across a number of rows in a worksheet and then match against two columns.
e.g.
Column B Column C
test 10
I would like the function to match against all rows that match against "test" in Column B and then work out which cell in Column C has the highest value
View 9 Replies
View Related