VLookup: Calculate The Mileage From Two Destinations

Jul 9, 2009

I am trying to create a multiple v look up formula to calculate the mileage from two destinations. I have a table with a From column, To Column, and miles column with data.

I would like to automatically calculate the mileage determined upon what the user picks as the two destinations from a drop down list. I thought it would work like this =VLOOKUP(B5:C5,G3:I14,2) But I'm not sure if I can have a range as the lookup value. I have attached my sheet I am working from.

View 3 Replies


ADVERTISEMENT

How To Calculate Mileage

Jun 23, 2014

trying to figure out a formula that would save me heaps of time trying to calculate mileage on expense reports each month, and I cannot for the life of me get the formula down. Following are the specifics:

Mileage is reimbursed at a rate of $0.17/mi for the first 198 miles in the week. Any mileage after 198 is calculated at a rate of $0.56/mi. The mileage log I have is a monthly log, and expenses are turned in on a monthly basis.

Is there a way to create a formula that will calculate on a weekly basis, at the correct rate based on the number of miles in that week thus far?

View 2 Replies View Related

Calculate Pay For Mileage While Factoring In The Number Of Participants

Jun 2, 2009

I'm trying to do is calculate pay for mileage while factoring in the number of participants. In other words, if the mileage was between 0 and 50 miles, and there were 5 or less people, then this cell should be $35.00. But if it's between 0 and 50 and there were more than 5, then this cell should display 175/the number of people (175 being 35 * 5). In other words, more than five people would receive an equal amount of the total pay for five people (this is because five people are the standard, but there are instances in which six or seven could participate and I was hoping to avoid hardcoding that).

The rest of the if statements simply follow that same formula, but for different mileage/pay rates.

View 6 Replies View Related

Calculate Mileage For Discrete Date Ranges

Aug 8, 2008

I have a list of mileage rates that correspond with different date ranges. For example the mileage rate for March 19, 2008 – July 31, 2008 was 50.5 cents per mile. I have 11 different mileage rates / date ranges from 2000 onwards.

I would like to devise a way that I could input the date and the number of miles travelled into the spreadsheet, then Excel would check the date entered in order to choose the appropriate mileage rate and calculate the dollar amount based on the # of miles input.

Here are the date ranges and rates in the event that anyone is interested in putting something like this together. I would be grateful for an example for one or two of the rates though and hopefully could extrapolate from there.

1/1/00 - 3/31/00 - 32.5 cents per mile
4/1/01 - 12/31/01 - 34.5
1/1/02 - 12/31/02 - 36.5
1/1/03 - 12/31/03 - 36
1/1/04 - 12/31/04 - 37.5
1/1/05 - 8/31/05 - 40.5
9/1/05 - 12/31/05 - 48.5
1/1/06 - 1/31/07 - 44.5
2/1/07 - 3/18/08 - 48.5
3/19/08 - 7/31/08 - 50.5
8/1/08 - current - 58.5

View 5 Replies View Related

IF Formula- Mileage Cells To Automatically Equal The Mileage

Feb 13, 2009

This is for mileage purposes. I have two sheets. 1st sheet I have Date, From, To, Mileage. I want the Mileage cells to automatically equal the mileage it is from and to. Right now I have it setup like this on the 1st sheet B7 is Date, C7 is From and D7 is To and E7 is Mileage. I have a drop down menu for C7 and D7 for our facilities such as Ming Ave (MNG), Coffee Rd(COF) and so on. On the 2nd Sheet I have the chart that show the miles.
example MNG to COF is 8.3 miles.

View 9 Replies View Related

Copy Multiple Destinations Using VBA?

May 20, 2011

I was wondering if there was a way to paste to multiple destinations using VBA within one copy destination argument. I should add that the cell I am using as a reference point is a variable that I created earlier in the process . The code I currently have is:

Code:
Sub find_last_row_of_data()
Dim rFoundCell As Range[code]...

Using the "Copy Destination" the way I have does the job and works fine. However there are about thirty other cells I have to add that the cell gets pasted to. Is there a better way to do this?

Secondly, and here is where I have no clue how to proceed, I need the finished sub to run automatically in the worksheet, so that each time the user adds a value in the next empty row in Column A, it will run the code. I should also add that the user actually enters the information on a different worksheet, the cells in Column A are linked to it using a formula. So there will be no actual physical imputing of data on this page, but the cell will still go from blank (with a formula) to a text string as it's value.

View 8 Replies View Related

Mileage Matrix

Mar 4, 2010

I am trying to figure out a better way to do my mileage for when I drive for work.

Currently I need to look at a sheet and see where I started and where I stopped and then I’ll see the distance.

Kinda look something like this.

Home
Work
School
Home
031Work
304School
140

What I would like to do is type in the “to” and “from” cell and have it automatically know the miles based on the chart above.
DateToFromDirectionTimeMiles3/4/10Home
Work

View 9 Replies View Related

Mileage Tariffs For A Taxi

Jul 17, 2009

I am trying to create a formula which will display tarriffs for a taxi depending on how far it has travelled -

Distance Tarriff
0-0.5 miles$1.00
0.6-2 miles$0.80
3-5 miles $0.75
6-20 miles$0.70

I want to enter the exact mileage travelled into a cell e.g. 8 miles, then I would like the exact cost to be shown in the cell below. In this case the cell will display $0.70 for 8 miles.

View 14 Replies View Related

Mileage Calculation Form

Jul 25, 2008

I'm working on creating a form where truck drivers can calculate their mileage to and from job sites. What I have now is two lists, one is a "to" list, where it lists the Job Sites, and one is a "from" list, where it lists the destinations (usually to Rock Quarries). These two lists are being referenced in the user form as combo boxes. An additional list holds the distances for each to and from possibility.

What I would like to do is when the user selects a to and from location from the combo boxes in the form, the form references the mileage distance from the list of to-from possibilities.

View 14 Replies View Related

GAS Mileage Chart Formatting

Feb 20, 2008

I have created a gas mileage chart where the MPG line will change from one color to another as the "type" of driving changes (Highway to City). However, the chart also ignores any non-full tank data to eliminate spikes that arise in your MPG calculations when you don't fill your tank up all the way.

I have attached a spreadsheet detailing what i have done and would like to know if anyone can think of an easier way to replicate this chart.

View 10 Replies View Related

Create Mileage Log From One Sheet To Another

Oct 26, 2008

I am trying to create a very simple mileage log that would get data from one sheet when I input it into another. (I attached the sheet). I have it set up so that it the formula is on bottom of sheet labeled store to store mileage but I would like to be able to track it easier on a different sheet called mileage log. So basically what I would like to do it put a formula in the mileage log so that I can just type in the store number in the to and from cells and have it populate it from the store to store mileage shet. I am an amateur. If it is easier I can just make another simple excel sheet that is on a seperate worksheet instead of using the mileage log.

View 4 Replies View Related

Mileage Log To Record Specific Distances?

Nov 2, 2013

I'm creating a mileage log for my work as a traveling art teacher. Most templates have you just input the number on the odometer when you started and when you finished. Since I can never remember to check the odometer when I am getting in and out of the car I thought it might be easier to just record the distance from each location once and then record that number of miles each trip. I usually travel the same route so the mileage is always the same.

I have an array of numbers right now, with 3 columns listing my 3 most common start locations. Then I have 5 rows listing the 5 schools I travel to for work, and the distances from each start to each end in the array. On a separate sheet I have my log.

What I would like to be able to do is select a start location and an end location from a drop down list on the log and have the number of miles automatically appear in the miles column. Then I can double this for the return trip and total it at the bottom and calculate my expense.

I am having trouble writing a formula that works for all 15 possible distances, and I don't quite know how to write it so that it references my array and finds the correct distance for those two specific choices. So far I have the drop down menu's pulling from the array but I'm stuck at how to index the array using the information that is coming from the drop down list.

Since I travel to these locations multiple times I think it would be a lot faster than looking up the distance every time and typing it up manually.

View 7 Replies View Related

Use Closest Date To Find The Starting Mileage Of Car?

Dec 26, 2012

I have a list with all our company cars (300). I also have a list with all the transactions of the fuel cards (12000 lines). Now I need the find for every company car (exact match) the nearest fuel-consumption-date (closest match to the given starting date) and take the mileage of that transaction. I've added an example. I have tried linking carnr and date (like carnr&"#"&date) and match these, but I don't always get the right car number.

View 1 Replies View Related

How To Record Actual Mileage When There Are Blank Cells Between Recordings

Apr 5, 2009

The spreadsheet i am working on requires mileage between last trip and previous trip.

Unfortunately there will be blank cells between as shown below ...

View 9 Replies View Related

How To Use Vlookup To Calculate The Number Of Shift Per Week For Each Agent

Dec 19, 2013

I would like to use vlookup to calculate the number of shift per week for each agent

View 10 Replies View Related

Create And Calculate Player Statistics Using VLookup In Excel?

Jan 31, 2013

I am trying to create and calculate player statistics using Vlookup in Excel. This is what I am trying to do:

BCD
5PlayerGoalsAssists
6Jordan Eberle00=VLOOKUP(TEXT(B6,"@"),B13:G14,4) used in C6
7James Neal 00=VLOOKUP(B7,B13:G14,4) used in C7

cell format is "general" in B6 thru B14

Lookup TableCol ECol FCol G
Player NameTeamGPGAPts
13James NealPITT4325
14Jordan EberleEDM1404

Imported Data from Yahoo Sports and have sorted in ascending order a-b-c-d

(pasted as text and than changed to General in Excel formatting)

I have tried using 2 different vlookup formulas structures, but no success. I have tried using numeric reference (i.e using numeric 1 in for both in the lookup table and the original cell) and that works.

View 3 Replies View Related

If And VLookup - Calculate Charges Of Freight Based On Predefined Parameters

Dec 13, 2013

I want to create an Excel sheet that calculates the charges of a freight based on predefined parameters.

I got 3 service types as shown below, two freight types and 12 different destinations both NT and SA have 6 different destinations:

I want Excel to do the following:

If Road and Carton and to NT-Country and weight is 7 then 7*1.000089 is the result

1 to 15
>15

Service
Type
NT
METRO

0.337284
0.337284

[Code] .......

View 7 Replies View Related

Vlookup Won't Calculate: Pull Data From "ILComp" Column B

Jun 11, 2009

for some reason my VLOOKUP formula isn't calculating. i want the VLOOKUP to appear in column E of "2ILMaster." I want to pull data from "ILComp" column B. i've tried formatting both columns as number and general, and the formula still doesn't work.

View 2 Replies View Related

VLOOKUP With INDIRECT (become Dynamic As The Table Array Part Of The Vlookup Will Change)

Aug 18, 2009

I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.

So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.

So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73

This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.

View 3 Replies View Related

Hyperlinks And VLookup: VLookup To Find EMail And Web Addresses

Oct 5, 2009

I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?

View 5 Replies View Related

Write VLookup Where Data Array Changes Each Time VLookup Used

Oct 29, 2012

I'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:

Loans to countries
Mar
Apr
May
Jun

Loans to banks
Mar
Apr
May
Jun

Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.

View 4 Replies View Related

Double VLookup (vlookup The Same Data From 2 Different Sheets)

Jul 13, 2009

I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.

View 4 Replies View Related

Vlookup Across Sheets, Nested Vlookup Possibly?

Jun 9, 2009

I’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?

The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.

View 14 Replies View Related

Vlookup Looping (for Each...next?). Vlookup Loop Technique

Jul 24, 2009

I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:

View 5 Replies View Related

Using Vlookup & Indirect To Ref List And Vlookup Files

Sep 17, 2008

I have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.

This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.

I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:

View 14 Replies View Related

Vlookup Error Msg "unable To Get The VLookup Property Of The WorksheetFunction Class"

Jan 8, 2009

I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.

I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?

View 3 Replies View Related

Vlookup + Vlookup Discounting Any #n/a

Jul 15, 2008

I'm taking a spreadsheet that I produce each month and creating a year to date spreadsheet in the same format. I'm using a vlookup to find the campaign name in each sheet and add up the totals. This works fine but sometimes a camapign ends and so the vlookup for that month will produce an #n/a value so will reduce the whole sum to #n/a.

The VLOOKUP + VLOOKUP + VLOOKUP I was using that produced an #n/a is shown below.

=VLOOKUP($A6,'[Margin by Site Net April 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net May 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net June 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)

To get round it I've added in an IF statement combined with ISERROR as shown below. It works but is looking quite messy. Is there an easier way to do this ? (the formula below is from the cell below the one above so the look up value is one cell down)

View 9 Replies View Related

Calculate The Value In The NPV

Aug 29, 2008

I have two columns in a payment schedule (which adjusts according to certain user inputs) that I need to use in my NPV calculation.

The first column is the Total Payment and the second is Inducements.

Therefore each value in the NPV calc. needs to be the sum of a given period's payment and inducement (but i don't want/have a separate column which calculates the sums). The number of periods adjusts with the users input of Term. There also may be periods where there is a payment but no inducement.

View 14 Replies View Related

Calculate Down To Last Row

Dec 22, 2011

The formula below calculates between rows 2 and 109. How can I change it to calculate between row 2 and the last used row in the sheet.

Code:
Range("D2").Select
ActiveCell.FormulaR1C1 = _
"=(RC[-1]-MIN(R1C[-1]:R109C[-1]))/(MAX(R1C[-1]:R109C[-1])-MIN(R1C[-1]:R109C[-1]))"

View 2 Replies View Related

Calculate IRR & NPV

Jan 10, 2007

i got a problem to calculate IRR and NPV for my company cash flow. i so confuse how to calculate cos the initial investment (expense) is pay in installment by yearly basis. i hope anyone can help me to solve this problem.

I m not sure whether what i'm doing is correct or not. thanx

http://spreadsheets.google.com/ccc?k...Hd2JSrIj7H-Pew

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved