I am trying to create a very simple mileage log that would get data from one sheet when I input it into another. (I attached the sheet). I have it set up so that it the formula is on bottom of sheet labeled store to store mileage but I would like to be able to track it easier on a different sheet called mileage log. So basically what I would like to do it put a formula in the mileage log so that I can just type in the store number in the to and from cells and have it populate it from the store to store mileage shet. I am an amateur. If it is easier I can just make another simple excel sheet that is on a seperate worksheet instead of using the mileage log.
This is for mileage purposes. I have two sheets. 1st sheet I have Date, From, To, Mileage. I want the Mileage cells to automatically equal the mileage it is from and to. Right now I have it setup like this on the 1st sheet B7 is Date, C7 is From and D7 is To and E7 is Mileage. I have a drop down menu for C7 and D7 for our facilities such as Ming Ave (MNG), Coffee Rd(COF) and so on. On the 2nd Sheet I have the chart that show the miles. example MNG to COF is 8.3 miles.
trying to figure out a formula that would save me heaps of time trying to calculate mileage on expense reports each month, and I cannot for the life of me get the formula down. Following are the specifics:
Mileage is reimbursed at a rate of $0.17/mi for the first 198 miles in the week. Any mileage after 198 is calculated at a rate of $0.56/mi. The mileage log I have is a monthly log, and expenses are turned in on a monthly basis.
Is there a way to create a formula that will calculate on a weekly basis, at the correct rate based on the number of miles in that week thus far?
I am trying to figure out a better way to do my mileage for when I drive for work.
Currently I need to look at a sheet and see where I started and where I stopped and then I’ll see the distance.
Kinda look something like this.
Home Work School Home 031Work 304School 140
What I would like to do is type in the “to” and “from” cell and have it automatically know the miles based on the chart above. DateToFromDirectionTimeMiles3/4/10Home Work
I want to enter the exact mileage travelled into a cell e.g. 8 miles, then I would like the exact cost to be shown in the cell below. In this case the cell will display $0.70 for 8 miles.
I'm working on creating a form where truck drivers can calculate their mileage to and from job sites. What I have now is two lists, one is a "to" list, where it lists the Job Sites, and one is a "from" list, where it lists the destinations (usually to Rock Quarries). These two lists are being referenced in the user form as combo boxes. An additional list holds the distances for each to and from possibility.
What I would like to do is when the user selects a to and from location from the combo boxes in the form, the form references the mileage distance from the list of to-from possibilities.
I have created a gas mileage chart where the MPG line will change from one color to another as the "type" of driving changes (Highway to City). However, the chart also ignores any non-full tank data to eliminate spikes that arise in your MPG calculations when you don't fill your tank up all the way.
I have attached a spreadsheet detailing what i have done and would like to know if anyone can think of an easier way to replicate this chart.
I'm creating a mileage log for my work as a traveling art teacher. Most templates have you just input the number on the odometer when you started and when you finished. Since I can never remember to check the odometer when I am getting in and out of the car I thought it might be easier to just record the distance from each location once and then record that number of miles each trip. I usually travel the same route so the mileage is always the same.
I have an array of numbers right now, with 3 columns listing my 3 most common start locations. Then I have 5 rows listing the 5 schools I travel to for work, and the distances from each start to each end in the array. On a separate sheet I have my log.
What I would like to be able to do is select a start location and an end location from a drop down list on the log and have the number of miles automatically appear in the miles column. Then I can double this for the return trip and total it at the bottom and calculate my expense.
I am having trouble writing a formula that works for all 15 possible distances, and I don't quite know how to write it so that it references my array and finds the correct distance for those two specific choices. So far I have the drop down menu's pulling from the array but I'm stuck at how to index the array using the information that is coming from the drop down list.
Since I travel to these locations multiple times I think it would be a lot faster than looking up the distance every time and typing it up manually.
I am trying to create a multiple v look up formula to calculate the mileage from two destinations. I have a table with a From column, To Column, and miles column with data.
I would like to automatically calculate the mileage determined upon what the user picks as the two destinations from a drop down list. I thought it would work like this =VLOOKUP(B5:C5,G3:I14,2) But I'm not sure if I can have a range as the lookup value. I have attached my sheet I am working from.
I have a list with all our company cars (300). I also have a list with all the transactions of the fuel cards (12000 lines). Now I need the find for every company car (exact match) the nearest fuel-consumption-date (closest match to the given starting date) and take the mileage of that transaction. I've added an example. I have tried linking carnr and date (like carnr&"#"&date) and match these, but I don't always get the right car number.
I'm trying to do is calculate pay for mileage while factoring in the number of participants. In other words, if the mileage was between 0 and 50 miles, and there were 5 or less people, then this cell should be $35.00. But if it's between 0 and 50 and there were more than 5, then this cell should display 175/the number of people (175 being 35 * 5). In other words, more than five people would receive an equal amount of the total pay for five people (this is because five people are the standard, but there are instances in which six or seven could participate and I was hoping to avoid hardcoding that).
The rest of the if statements simply follow that same formula, but for different mileage/pay rates.
I have a list of mileage rates that correspond with different date ranges. For example the mileage rate for March 19, 2008 – July 31, 2008 was 50.5 cents per mile. I have 11 different mileage rates / date ranges from 2000 onwards.
I would like to devise a way that I could input the date and the number of miles travelled into the spreadsheet, then Excel would check the date entered in order to choose the appropriate mileage rate and calculate the dollar amount based on the # of miles input.
Here are the date ranges and rates in the event that anyone is interested in putting something like this together. I would be grateful for an example for one or two of the rates though and hopefully could extrapolate from there.
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.
I have a workbook with a hidden sheet ("Template") and a visible sheet("New Job"). I need code so when cell F1 in "New Job" is populated:
1-the sheet is renamed to the value of F1, 2-a new tab is made (a carbon copy of the hidden sheet "Template") 3-the new tab is named "New Tab" and marked as unhidden.
Public Sub Worksheet_Change(ByVal Target As Range) ActiveSheet.Name = Range("F1").Value End Sub
Function WorksheetExists(SheetName As String, _ Optional WhichBook As Workbook) As Boolean Dim WB As Workbook Set WB = IIf(WhichBook Is Nothing, ThisWorkbook, WhichBook) On Error Resume Next WorksheetExists = CBool(Len(WB.Worksheets(SheetName).Name) > 0) End Function..................
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
I have about 100 products and each has its own sheet that I fill with data. Once I have finished with a sheet I rename it and create a copy and then hide the original and delete the entered data from before and start over.
Is there a way I can make it so when I hide a sheet it will automatically create a copy and delete a specific range?
On Error GoTo ErrorHandler Dim createsheet As Integer createsheet = MsgBox("Do you want to Create a Sheet for Uncontrolled Discharge?" & vbNewLine & "NOTE: if the sheet already exists, you cannot create a sheet with the same date - select NO", vbYesNo, "Caution")
[Code] ...
ErrorHandler: MsgBox "There is already a Sheet Created for that Date.", vbCritical End If
Right now...it will pop up the error message but it will still create a "template" sheet with the suffix (2), (3), etc... instead of canceling the create new worksheet operation.
i have a sheet called 'sample database'. it consists of 56 columns, each with a specific title in row 1. i.e. name, surname, mobile_number, and so on. from row 2 onwards the data has been populated for roughly 200 rows.
i have another 'Capture Sheet' which has the same titles as 'Sample database' except it's in a different format. its a printable form that is given to new employees when they start. once they have completed it it gets captured into the 'Sample Database' sheet.
my wifes boss now wants 1 new sheet for each row in the 'sample database' sheet based on the format/layout of the 'capture form'. how can i get the 'capture form' to auto populate the data from the 'sample database' sheet and create a new sheet for each row? i know this is possible i just dont know how to do it.
I want to create a loop, that copies the cell B11 from each sheet, and creates a new sheet called "Average". In this sheet I want it to add sheetname in column A, and in column B the value fetched from that sheet..
I need to be able to check if a certain worksheet exists in the active workbook. If that worksheet does not exist I need to make it. I already have the code for creating a new worksheet but I'm not sure how to check if the worksheet already exists.
I am using a code to create a new sheet using a click button, and currently have a template file that is being used.
Private Sub cmdNewSheet_Click() Sheets.Add Before:=Sheets("Finish"), Type:="C:Documents and SettingsAdministratorMy Documents Stock ControlStockTemplate1.xlt" Sheets(Sheets.Count - 1). Name = txtNewSheet.Text txtNewSheet.Text = "" End Sub
What i want to do is use a sheet in the workbook as a template. The sheet i want to use is simply called 'Temp', and the workbook i am working in is called Stock1.xls. Is this possible? I have had a look at past threads, but cannot find anything that points me in the right direction.
I would like to be able to have a macro, linked to a button, so that when you press that button it creates a new named sheet based on data in a particular cell.
I.e. There is a table with the following data: Apples (A1) Oranges (A2) Pears (A3)
There are also the sheets Apples, Oranges & Pears.
You enter 'Grape' in cell A4, then when you press the button it creates a new sheet named Grape.
Also when a new sheet is created, the 'input cell', in this case A4, is moved down one so that when the next sheet is needed to be added, it doesn't just add the same sheet (i.e. in the example above, we don't end up with a new sheet named 'Grape' each time we click the button).
I have a workbook with about 10 sheet of data that i using to other sheets for my formulas. My workbook is about recipes costing and every time i use the same sheet, i put my data and then i copy it at the end of my sheets. I am trying to create a button that when i click on it to create a new sheet with exactly the same formulas and data. I try to create button but unfortunately the formulas and the data were not correct. Is it possible to create a button to make my worksheet easier?
I want to create a Macro that will create a new worksheet when the user so desires using a message box.
The workbook contains 4 tabs, for example, named as follows: (1) template (2) 250 (3) 825 and (4) 975. I want the marco to work as follows:
1- Macro will ask user "please type store number" 2- Macro will then make of copy of "template" and create the new sheet 3- if user types in "860", I want to the macro to name the new sheet "860" and place the new worksheet between sheets 825 and 975.
Also - this may be asking too much but is it also possible to also prevent user from entering non-valid numbers? The valid numbers are 001 - 999. ie; if user enters "1500", return message "invalid entry".
The routes are listed in column C, and other customer information is in columns A, B, and D to I. I have several workbooks, and in each workbook I need to have a different sheet for each Route. Right now, all the information is on one sheet. Is there a Macro or some VBA I can use that will make one sheet for each route? And move all the information with it?
