Is there a way to trigger a warning box (ie - must be divisible by 50) when a specific entry is selected from a pull down validation list? The triggering factor is a correct answer to the validation so I do not think the error alert will work in this instance.
View 2 Repliesis there a way to force so that a cell value can be only of what a validation droplist offers, hence users can not enter their own values and have to use the droplist for cell content selection.
View 2 Replies View RelatedI have a Range on one sheet formatted like this and sorted by Sup then Rep:
Rep Sup
John Sally
Mark Sally
Joseph Sally
George Betty
James Betty
etc..
I have a Validation Drop Down list where a Supervisor is chosen. There's a specific range that I would like to automatically fill in with the reps assigned to the Sup. This is driving me crazy! I already know how to obtain that list as another Validation Drop Down, but not quite sure how to make those values appear in a range instead of a Validation List.
I need to get data copied from sheet1 to sheet2
depending on selection in a validation list.
The data is on the same row and all the same range.
So it would look something like this.
A B C
Fruit Orange Apple Pear
Veg Potato Carrot Onion
Animal Bear Cow Dog
I have the data in A in a dynamic range and validation list.
I need all the data copied from the specific rows ie
choose Animal from the validation list in Sheet2!A1 and
the entire row Bear Cow Dog get copied to Sheet2!B1, Sheet2!C1, Sheet2!D1.
The second problem I think is a lot more complex.
So the same scenario above but this time its a multi select on Sheet3.
I need to be able to select two (or more depending on Fruit and Animals to display in A1, A2 and then their valid options to appear in B, C and D
I have created a cascading data validation list, and I would like to have an adjacent cell auto populate according to the dropdown selection.
Data Eg:
Oranges 1100
Apples 1101
Pears 1102
Grapes 1103
If the user selects "Pears" from the dropdown list, I would like the adjacent cell to populate with the numerical code for "pears", in this case 1102. I am designing a new expense report form at the office, and I am at a standstill with this problem.
I'm looking for a method, vba macro or Excel code, to preform the following task:
In the C column the user chooses one of several options from a menu, let's call these options 1 - 10 (this part is already done). Depending on the choise, different things are supposed to happen:
For 1-9, the formulas for cell A - Q on the current row should be copied to the next row (but with +1 in row number in formulas of course).
For 10, 3 blank rows should be created (well they already are blank..), on the forth row down, A3 - Q3 should be copied exactly. On the fifth row, the same formulas thing that was created for choise 1-9 should be created.
Since the real xls-file is too big already and it contains some sensitive information, I can't attach it here, but I made a small and similar xls-file, that better explain what I want to do.
In all the cells in column F I have a validation list with several predefined choices, but at the bottom of this list I want an "Other..." option, which when chosen, enables the user to enter a new string in that cell if none of the predefined did not match.
View 7 Replies View Relatedvery complex spreadsheet for weight & balance calculations. It's to the point where everything works perfectly in Excel 2007, but it must be used primarily with Excel 2003. Discovered that a crashing problem had to do with condtional formatting, that's all been cleared and will soon be fixed, but there's one that I just can't quite figure out.
I'm using the worksheet change event to trigger the update of charts... In this case, it's looking at a particular cell that has data validation on a dropdown as the trigger. Works perfectly in 2007, and if I put a msgbox prompt in to be launched by a change of that cell, it launches. I can put the chart update code in a separate sub and launch it manually every time, but I cannot call it from the worksheet change.
I've included attachments showing what I believe are the relevant bits of code -
I'm working on a simple worksheet, it is a tracking sheet for programs taught. What I'm trying to find is a code to insert a row based on a Data Validation List.
Exampl of data:
Column A is for " Name" then futher down Column K is "Program Taught" and Column L is " Date Taught".
Column K is where the Data Validation List is located with a in cell drop down.
What I would like to do is when a user selects a program from Column K a row is inserted with all of the formulas and formats from the previous row, and upon insert would like it to copy Column A into the new row.
This would be so I can keep a historical of programs and dates taught.
And to really spice things up I want to lock Columns K & L of the previous row after the new row is inserted.
I currently have a drop down menu in one of my worksheets, in which I have several different text values entered. What I would like to do is link each of those text values to a numerical value, which would be entered in to another cell. So if I select "Option A" from my drop down list, and Option A is equal to 200, I want "200" to show up in another cell. If I select "Option B" from my drop down list, and Option B is equal to 400, I want "400 to show up in that same other cell.
View 4 Replies View RelatedI have created List box called ListBox10.
Under format control I have put the range of A1:A3.
Cell A1 is text: Order 1
cell A2 is text: Order 2
cell A3 is Text: Order 3
Im trying to trigger different macros from each of the options available in the List Box...here is what I have so far.
Sub ListBox10_Click()
If ListBox10.Text = "Order 1" Then
Application.Run ("Macro1")
If ListBox10.Text = "Order 2" Then
[Code]...
Can seem to get the thing to run getting Block If without end If error.
I have three hidden columns (Text only) one column with Parts, then Description, then Cost. I have a pull down menu (i.e. Cell 3, A) listing all of the choices in the hidden Parts column. I want to automatically populate Cell 3, B with the corresponding Description when a Part is chosen from the pull down menu, and the same in another column for the Cost.
I am using Excel X for Mac, in OS 10.5.2
Is there a way to use Data Validation that will pull data from a source list and also be able to type in additional data or just new data in same cell?
View 3 Replies View RelatedWhen I use list validation with name (Data validation List. Inseret name difine) and then trying to write manualy a differnt value (not from the relevant list) I am not being warned like I get when I choose a list . And then even when I have a list or a Name If I copy a diffrent value I am not being warned.
In cell I2 I have a data validation list. If the selection is "2" then I want to copy and paste a value from another cell to another sheet.
I did a recorded macro but the code does not recognize the selection from the data validation celll, I2.
Is there some code I can add to get the macro to recognize what the user selected?
I've got a spreadsheet and I've used data validation to look at a list on another tab.
I need to be able to multiply values out based on what i choose on the drop down menu.
I've attached a sample spreadsheet to explain : tasks.xlsx
I'm trying to continue on this post: Populate Cells After Choice From Drop-Down
I'm trying to expand on CNL's idea. What I need to do is create a spreadsheet that autopopulates two blocks based on the dropdown box that preceedes it. I've got it to partially work, but can't figure out the next step. The differnce between my sheet and CNL's sheet is my drop-down is an indirect data validation.
The easiest would be to have my data in one long list, but my goal is to make it easier on the user to find the specific procedure (I'm trying to build a budgeting spreadsheet for a medical office). So in box A15 there is a list of the different service area, which gives a list of choices in C15 based on the choice selected in A15. My goal is to have G15 and G16 list the cost and charge respectively.
M1 - O3 is the data for Radiology
Q1 - S4 is the data for Labs
U1 - W4 is the data for Office
I am limiting choices in a certain cell to a list via data validation (using data validation, allow - list and pointing to the source). I want to limit the next set of choices in the next column (in this example in Column C) for the user based on the choice made in the adjoining cell. For example to keep it simple I will use the following: if the user selected "Fruit" in B1, then the options in C1 would only show "Oranges","Apples", "Pears". If however the user selected "Veg" it would only show "Cucumber", "Lettuce", "Spinach", "Radishes" in the drop down in column C. I can put a prefix in front of the column C data validation list if that is needed to narrow down e.g. FR-oranges, FR-apples etc.
A B C
1 Fruit Oranges
2 Veg Lettuce
3
Data Validation source for Column B (H2:H4)
Fruit
Veg
Nuts
Data Validation for Column C: (I2:I10)
Oranges
Apples
Pears
Cucumber
Lettuce
Spinach
Radishes
Almonds
Peanuts
This part of the form is where the user selects the supplier of the fitness equipment via 3 buttons;
CmdLF
CmdTG
CmdOther
Clicking CmdOther checks if there is a text value in other so we have a record of the supplier.
We can't limit this to a definitive list as there may be new suppliers/some in other regions. However, I would like, when user click CmdOther, excel to look up the value they enter into TxtOther.
If it is in a set list, then it goes straight through, if not a MsgBox propmpts the user to check the name and gives them the option to edit the supplier or accept
Private Sub CmdOther_Click()
If TxtOther.Value = "" Then
MsgBox "You must enter a Supplier!"
Exit Sub
Else
[This is where I want it to then check if it is valid before continuing bellow]
ActiveWorkbook.Sheets("DATA").Activate
Range("H2").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
ActiveCell = TxtOther.Value
ActiveWorkbook.Sheets("OPEN").Activate
Unload Me
FrmSubCat.Show
End If
End Sub
If there is away, to restrict the Time Out ( Cell B2), according to Time In (Cell A2), I mean if Time In is empty, then there should be no Data in list of Time Out, and if the Time In is 8:30, then the Time Out should have greater than or equal data in its list...
See the attachment
I'm trying to set up an Input Box that allows the user to have a set of options to select from. The only things I have found deal with a MsgBox with set options of Yes, No, or Cancel. I would like to allow the user to have multiple buttons, check boxes, or radio buttons to select from. (any of those will work). For example: "Select the Customer Service Representative you worked with: "
-Amy -Jill -Joseph -Christopher
I check the FAQ and couldn't understand the advice. How do you create a list to select a number of items to use in a spreadsheet. I wnat to us this list mutiple times in the same spreadsheet.
View 5 Replies View RelatedI have to introduce often the same entry (i.e. a firm or commerce name).
To avoid having to make all te time the same entries and to avoid entring the same firm with different spellings I imagine making a choice from a list, list that would be able to "learn" new entries.
Example: When I type the "D" of "Dupont de Nemours", Excel would propose all entries beginning with a "D", and if I introduce a name that doesn't still exist in the list, I should be made attentive to that fact and proposed to add that name to the list.
I have a drop-down box(K6) When a style is selected I need to have data show up in other drop-down boxes (H3,L3,P3) These selections would only pertain to the selection in K6. They would change when a different style is selected. There are multiple choices in the secondary drop-downs. [IMG][/IMG]
View 9 Replies View RelatedWhat I need to do is create a Drop Down box. When a user makes their selection it gives another drop down box from what they selected. Each choice in the 1st drop down will give a different drop down box in the next field from what they selected in the 1st. I am having troubles getting this to work.
View 3 Replies View RelatedI am using INDIRECT to create a second dynamic drop down list (L1) that is based on the cell contents of a first drop down list (I1). I want to create a macro that will blank the 2nd drop down list ONLY when the choice in the first list is CHANGED. I have the following, but it blanks the second list as soon as the first list is clicked on, rather than when a change is made:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Not Intersect(Range("I1"), Target) Is Nothing Then Range("L1").ClearContents
End Sub
I have a way of getting a cell value from having a data validation linked to a row of cells containing lookup formulas.. which in turn are looing at a table.
I have attached a small example.
The problem is the spreadsheet is a large one and i was hoping I could shrink the size of this by removing the vlookup formulas by having some kind of index/match/lookup formula inserted directly in the data validation.
I got this to work using nested IF formulas but its not very practicable!
The attached example has data validation in column A that selects the task type. Choosing this then changes the values in the vlookup area.. which then becomes the validation list for cell in column B.
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
I want to make a lesson table which distribute the names to lesson choice priority.
You can see detail and explanation at attached file. LessonChoice.xlsx
Charting Data Based On Drop Down List Choice
I am trying to build a report where I can chart data base on a dropdown selection.I did build the dropdown lists, however I don't have any expertise on execel functions in order to make it work.I am attaching my draft report.