I named a range State, it contains a list of all the US state abbreviations. I do a data validation that refers to this range as a List. If I type in something that's not in the named range I get the error message I created for the Validation.
But - I don't get a drop down button. I tried to do the same validation on another cell and get the same thing. Other drop downs for validation appear.
I have just opened a sheet in work and this phenomenon has occured. Basically the data validation: list appears to be referencing a sheet that doesn't exist! My initial thought is that the original sheet name had been changed, but on trial the list seems to change reference. I've checked that the sheets aren't hidden
I have this formula =COUNTA($A:$A)<=4 that limits amount of cells that can be populated in column A, I use data validation with "Allow costume" option and using that formula. It works fine from worksheet it displays the message when the limit is reached but it doesn't work when data is inputed/populated from userfrom, it allows userform to put more entries than set limit 4 in this case.
I have a bit of code that calls a formatting sub depending on which cell is modified. It is triggered by the Worksheet_Change event, determines which cell is modified, and either calls the formatting sub or doesn't based on the location of the modified cell.
Some of the columns in the sheet have data validation with drop downs. If I select a value from the drop down, it doesn't trigger the Worksheet_Change. If I type a value into the same cell, it does.
This was apparently an issue in Excel '97, but supposedly fixed in '03?
Using Excel 2010, I set up a simple workbook with a spreadsheet on one page and the ranges for data validation on another. I successfully linked the fields in the "Category" and "Tender" columns with the data on the second sheet, making nice drop down menus. Everything works fine on my computer. However, when we open the workbook on a different station, the drop down menus disappear. If you highlight any of the "Category" or "Tender" fields, the little drop down prompt is missing; they behave like regular, un-formatted fields. It appears that the data validation became un-linked.
We tried opening versions with certain fields locked (Mainly the Total, Breakdown, and Summary areas, but the fields with data validation were still editable), and also completely unlocked documents. Every time, the drop down lists were lost when opened on different stations.
I've attached the completely unlocked version : 00_FLEX TRAVEL EXPENSE REPORT_v3.xlsx
Forget to check a box or something? This seems way harder for me to figure out that it should be!
I want to do couple of things here. 1. put an empty field in a drop down box. If possible the empty field should be at the top from the drop down menu. 2. Update names in drop down box when I add names to the list
How to make a drop-down list appear when a cell is double-clicked as opposed to just clicking on the box to the right of the cell that appears when you click in the cell? I want to be able to use the ability to drag-copy the cell contents from the little square in the bottom-right of the cell, but cannot do this when there is a validation drop-down list!!
If I have a cell that uses a list for drop downs (ie "Make" can be any of several different Fire Alarm Panel Types) and a second cell that I want to use to represent "Model Number" is there an IF the model is A from the Make list, THEN the next cells drop down list represents the model numbers under that Make?
I have a spreadsheet with two drop downs, one lets say has country and the other city. When I select a country in the country drop down, I want to be able to only select cities in that country.
I used a method that I found in an earlier post, where I define the name of list of cities of a country to that country and then use the indirect function in city dropdown down validation. The prolem is I can still get mismatched city and country because when I change country, I still have the city from the previous selection untill I drop down and select the city again.
I would like the city to show blank when I change the country until I select a city from that country.
I have a range in a worksheet named "Product3" that has data down to row 30 that is linked to drop down boxes on another sheet. I want to add data to rows 31-40 to also show up in the drop downs. How do I extend that range?
I have a list for the user to enter in creditor name, balance, monthly payment and interest rate. In the credior name portion, I have used a Data Validation List (drop down menu of bank names) for the user to choose from.
Later on... The user types in the customers ACTUAL bank acount that they will be making payments from.
If the user types in a bank that is the same as one from the drop down list earlier on, I would like a dialog box to come up with further instructions.
I am trying to create validation drop down list for a cell, however I want different drop down lists which are depenent upon another cell.
in Cell A1, I want the options "A", "B","C" etc If cell A1 = "A", then drop down validation for cell A2 = 1,2,3,4,5 cell A1 = "B", then drop down in cell A2 now equal 6,7,8,9, 10 cell A1 = "C", then drop down in Cell A2 now equal 11,12,13,14,15
Would anyone know if it is possible to extend the size of the list presented when using the data validation drop down? At present, it seems to default to 8 choices (even though there is a scroll bar) but I was wondering could the list Automatically display, say 20 choices?
I was wondering if there is a way to see all the choices on a drop list. Currently the drop list only shows 8 choices but I am wanting to see all 32 choices eliminating the need to scroll the list. I have attached a picture.
I am doing an internship in Germany, and I have this crazy project with Excel. I am not very familiar with all the equations.
I want to select a company name and a type of container from a drop down menu, and have the information show up on a different sheet assigned for that specific company for the right size container. It involves quantities.
I have 2 validation boxes. The first is a simple list of 5 options (based on a 'name' range). The second is a filter of a larger list depending on the answer in the first box. I have made my 'name' range as big as the largest list but other lists are quite short. The problem I have it that the drop down box is showing all the blank cells in my 'name' range.
The bigger problem is that when you select the pull down it highlights the blank field first instead of the first item on the list so you have to scroll up. This is a problem as staff think there is nothing on the list. So how do I either not show the blanks or get the drop down to start at the top of the list?
From the Excel Toolbar - Data/Validation - I'm successfully using a validation list [drop down arrow] to be able to choose from a list and have whatever value I choose entered into the cell. So far so good. Everything working fine.
Here's the thing though, the list I'm referencing is a column with 50 rows. Sometimes there are many items in the column - up to 50, and sometimes only 3 items depending on other variables in the spreadsheet.
Because the list is referencing the entire 50 rows in the column (only way I know how to do it), during times when the column has only 3 items (3 rows), the drop down still shows a bunch of blank spaces (like 47 of them - tons of white space with a scroll bar window that runs down beyond where one can see), which is awkward (strange looking).
How do I program the validation list to only show as many cells within a range that have actual values within the cell, or where <> "" ? Or, in other words, to leave all blank spaces found in the list = NOT SHOWN.
Can we have colors to choose from,in the validation list drop down? Instead of values of text I want colors to choose from the drop down list. Once I click on the small arrow, I should have the color shades to choose from the drop down list.
I'm trying to make a sheet that will allow users to either pick from a drop down box, or if the choice they want isn't there, to input data in the same cell. That part I have got. What I can't do is figure out how to have excel add that user input to the list of options, so that they next time the drop down box is used, that "user input" will appear as an option in the drop down. I used data validation to do all these drop downs.
I have a spreadsheet with a number of columns regulated by Data Validation.
They are linked to lists with DV, which normally generates a nice drop-down box when you click on the cells.
I inserted a column into the spreadsheet, and now DV doesn't generate a drop-box anymore! In any of the columns! The "In-cell dropdown" box is still checked in my Data Validation screen, and the cells are still bound by validation to only conform to the lists.
Can anyone think of why these boxes would have disappeared? I've shut down Excel and re-opened the file in case it was a momentary glitch. I've deleted the inserted column... In short, I've tried everything I can think of.
Even if I remove Data Validation from the columns, and re-instate it with the "In-cell dropdown" box checked, I still don't get my drop-boxes.
I would be totally happy to send my complete file to anyone who wants it (although it's a bit big, as I have to send the directory structure if you don't want to get an error, about 1 MB), but anyhow - I'm reasonably desparate to get the drop-boxes back in.
I am currently working on a spread sheet that has a lot of data validation drop down lists. They were all working fine but now none of the drop down arrows are showing up.
The drop down validation feature on my sheet isn't working. I have treble checked that the boxes for data validation have been correctly done. In another sheet the same data validation feature is working? Can anyone suggest a reason for this?
If you are stumped I can post a snippet of the offending sheet.
Does anyone have an example of dependant drop boxes with illegal characters in them? Even just a teensy one... If I have an example I can manipulate I can actually see what does what... The several-paragraph-long explanation with descriptions of what's being referenced by what and where and why - isn't helping me any.