Trying To Sum 4 Cells Where 1 Is Multiplied Without Exceeding A Value
Jan 17, 2010im trying to sum the cells C20:F20 while having cell E20 multiplied by cell C4 without having the product exceed 50.
View 9 Repliesim trying to sum the cells C20:F20 while having cell E20 multiplied by cell C4 without having the product exceed 50.
View 9 RepliesBasically i need a formula that will look at the message content on a seperate sheet (Data sheet on the attached example) and multiple by the volume of the message type to return a value on a seperate sheet.
The problem i have is our messages appear in the data as seperate lines based on the entire message content, with a quantity of how many times that exact message was sent on a day DESPITE there being many variations of a message, they may all only equate to 1 or 2 actual message types.
In the example you will see the Data tab showing Example message 1, Example message 1.1 etc. All of the Example message 1-1.5 are actually the same message type (same applies to Example message 2) and i need to be able to have formula that groups and counts these to return a value by message type * by the quantity per day. So in the example, Example message 1 would return a result of 10 on the main sheet.
I got an excel sheet were in column A i have listed a few names and in column B I got their respective results (numbers) with a background color.
I want to insert a function in such a way that when their numbers exceed a certain number the background color changes from for example blue to green.
so >1200 = blue background color
1200-1350 = red
< 1350 = green
I have some numbers in a column that I need to copy 12 times (each one) into another column. The problem is that I got like 200 records that will be converted in 15000 aprox. I've uploaded an example of what I need,
View 3 Replies View RelatedIn a range ("A1:A30") are values, What I need to do is have those values multipled by 1.07 and the new value incerter in the cell using VBA, I dont wantto use a formula.
View 5 Replies View RelatedI got a list of products and a price list. How to obtain a total for a given subset of products using a formula? Kind of sumif multiplied by a vlookup...
View 4 Replies View Related I'm working on a spreadsheet to measure performance.
Target is 10% and below
If actual is below or equal to 10%, then 100% achievement
If actual is above 10%, From 11% to 20%, then achievement is 90% and so on down until 0%
If actual is beyond 20%, then achievement should not exceed 0%
I have some alphanumeric mixed data which is from 15 digits to 18 digits. In each data there have 5 zeros in the middle. I want to keep all the alphanumeric to 15 digits only. It will delete the zeros not any other value which length is greater than 15 digits. If a length of a character is 17 digit it will delete 2 zeros & if it is 15 digit then keep it constant.
Like: AJSPP00000125467 change to AJSPP0000125467.
I have attached a portion of a schedule I have been asked to update to show when more hours are scheduled for a time period than are available on the schedule.
Each Dept.(Man. and DCC) has 16 hours available per day, M-F.
How can I chart or show somehow when a conflict arises? I need to outsource the excess time to another facility in a timely fashion.
Attached File: GKirbywork overload.xlsx
Each car has a value, and each car has odds.
I must choose 5 cars, and the value cannot exceed 100.
I typed in all my data, can Excel choose the best possible lineup for me?
In the end, I need the lowest result possible while only using 100 pts in
value.
I am using Excel 2003
Here is a sample of my data.
Car # Value Odds (#to1) (Result=Value x Odds)
123.5494.00
223.45117.00
322.85.75131.10
422.66.75152.55
522.212.5277.50
62315345.00
71523.5352.50
82217.5385.00
921.820436.00
1019.523.5458.25
1121.623.5507.60
122125525.00
1321.725542.50
141930570.00
1522.130663.00
1620.335710.50
1721.934744.60
182040800.00
1918.845846.00
2018.647.5883.50
I need to populate blanks in a column without exceeding the last row of data
View 5 Replies View RelatedThe code segment from "Get Around Excels 3 Criteria Limit in Conditional Formatting" works perfectly if I type the variable directly into the cell, but not in a range of cells. That is to say, if I copy the source cell to a range of cells I receive a "Run-time error 13: Type mismatch" error". Is there a way to get around this? This is the code segment I've tried in the worksheet.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("b2:q53")) Is Nothing Then
Select Case Target
Case "IBBCH", "ibbch"
icolor = 36 'light yellow
Case "OBBCH", "obbch"
icolor = 34 'light turqoise
Case "OBBRDG", "obbrdg"
icolor = 35 'light green
Case "LNCH", "lnch".........................
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I did my search, but cant find and knows what key search to look/type for...
If i have data A1 through A10, such as 1 1 2 2 2 2 3 3 3 3
How can i get column B1 through B3 as 1 2 3 ?
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View RelatedI am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
1.I need to protect certain locked cells from editing and allow certain unlocked cells to be changed on multiple worksheets.
2.When all of the changes are made to the unlocked cells, I need to password protect the entire workbook (except one worksheet) from any changes. (i.e. Prevent even the unlocked cells from being edited)
3.I also need a password to un-protect the workbook and return it to the state described in # 1. above .
Working in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I am trying to conditionally format the top middle and bottom thirds of a range of data. Problem is, that the range needs to be flexible as sometimes there may be a maximum of 36 cells with data, but sometimes there may be less (so there are blank cells in the range that need not be counted). The methods I have tried always include the blank cells, and so it is not equally formatting the thirds (as it includes the blanks cells as part of the bottom data)....
Here are the 2 methods Ive tried so far using excel 2003)
Top 34%:
=IF(INT(COUNT($D$3:$D$38)*34%)>0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*34%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*67%)),MAX( $D$3:$D$38))0,LARGE($D$3:$D$38,INT(COUNT($D$3:$D
$38)*100%)),MAX( $D$3:$D$38))
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
Locking text in cells but not the ability to change colour of cells
******** width="234" height="60" frameborder="0" marginwidth="0"
marginheight="0" vspace="0" hspace="0" allowtransparency="true" scrolling="no" id="aswift_0" name="aswift_0" style="left: 0px; position: absolute; top: 0px;">*********>
I have a spreadsheet where I can change the colour of a cell by clicking the mouse, I also have text in many of the cells.
What I need to do is protect (lock) the text so that no one can change the text in any of the cells, but I still want to be able to change the colour of the cells by clicking the mouse in that cell.
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedI have spreadsheet with different 100s of columns of dates with 600 rows. The first row identifies which zone the data belongs to (North, South, East, West. NE, SW, SW1, etc...)
I want to write a formula to check how many dates in each column fall in 2015 or later years; This can be accomplished by writing a countifs formula.
Where it gets complicated is once i filter on the Zones;
I want the formula to give me the desired result - count of all CELLS where the year is 2015 or greater - WITH FILTERS ON.
I stumbled upon following sumproduct formula that gives count for visible cells, however when i apply the date criteria, i get incorrect result -
=SUMPRODUCT(SUBTOTAL(3,OFFSET(IJ3:IJ999,ROW(IJ3:IJ999)-MIN(ROW(IJ1:IJ999)),,1))*(IJ3:IJ999>DATE(2014,12,31)))
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies View RelatedI'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.
Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".
Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?