I have been trying to register a macro and modify it. That was supposed to autofilter a table by date between values contained in 2 cells (start date & end date).
I declared variables for that, but for some reason, value returned are Emty (date 00:00:00).
Do you see something wrong in this small code?
Sub Filter()
Dim fDate As Date
Dim lDate As Date
fDate = Range("B1")
lDate = Range("B2")
Range("B3:I3").Select
Selection.AutoFilter
ActiveSheet.Range("$B$3:$I$99").AutoFilter Field:=1, Criteria1:= _
">=" & Val(fDate), Operator:=xlAnd, Criteria2:="
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I had this problem a few days ago and NVBC suggested Text to Columns, which worked initally but didn't seem to 'save' or stick... also, I'm not sure what is causing the problem to begin with. It was my understanding that Excel couldn't return a truely 'blank' value. If a cell was blank or empty, Excel still 'sees' it as Zero. WHY then, for the Love of Gummi Bears, will Excel not calculate my formula. It's a simple formula!
=A13+B13
I've tried =SUM(A13+B13)
I've tried =IF(ISERROR(A13+B13),"",A13+B13)
But if don't TYPE in a 0 or a number, then it just does nothing. 50 + 0 = should be 50 not blank or #VALUE!. 50 + Nothing = should be 50 not blank or #VALUE!
Attached is a small copy of what I'm trying to do. I've double checked that all number cells are formatted to numbers, not text. I tried the Data:Text to Columns trick. I've tried Tools:Options:Show Zeros. I've tried Manual and Automatic Calculation. They shouldn't have to type in 60 cells of Zero to get the simple calculation.
Ok, so I have a column of data in 24hr time format over a 24hr period from noon thru midnight and back to noon again. It has been necessary to make some of the cells in the column blank, and I am having difficulty extracting the first and last non-blank entries of the column (basically I want the earliest and latest time in that specific 24hr period). The time data is in order, so for example, some of the first values in the column are 14:30, 21:10, and 22:40, while some of the last values in the column are 02:20, 05:50, and 11:00, therefore the values I require are 14:30 and 11:00.
Any help that anyone can give on this matter would be greatly appreciated, but until then I guess I will keep plodding through the help sites and playing with formula until I spontaneously combust.
I have a range that is filled with formulae and the the number of rows in the range with data changes as the formulae reevaluate the inputs. So the rows with visible data changes between one row and 200 rows. By looking at the output in the first column of the range, Col M and finding the last row where the formulae returns data, I need a way of selecting across the columns of the range (M1 through to Qi) where i is the number of rows that have data in.
I'm using a variable to loop down a column of data. Each time it loops the variable may or may not perform an operation - it will if there is something in the cell but won't if the cell is empty. It writes the answer of the operation to an ajoining cell, before looping again.
The issue is that if the row cell is empty, what's written to the ajoining cell is the pre-existing value of the variable, because its value hasn't changed.
how best to 'empty' the variable each loop to ensure either that the correct value or nothing at all is written to the ajoining cell?
I have a sheet with a reference field that I want to sort. Each cell in the reference field has a formula in it, which specifies that the cell remain blank unless there is a value in the cell. The values are either text values or number values. e.g. =IF(ISERROR(S4),"",VLOOKUP(C4,'Rider Data'!A:G,6,FALSE))
When I sort the field in ascending order by the column that contains the formula above (using a macro written for this sort procedure), where the expected value is a text value, all the blank cells are sorted ABOVE the cells with text values in them, rather than below, even though they are blank cells. However,if I sort on a different column which contains time values or numerical values, the sort function works just fine. I have tested the VBA code that produces the erroneous sorting and confirmed that it happens only when sorting on columns that contain text values. I would like to sort text values in ascending order with blank cells BELOW the sorted cells.
I would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code: Sub ModifyNewData() Dim r As Range, rAll As Range Dim WS As Worksheet Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB: Public Sub DelRows2() Dim Cel As Range, searchStr, FirstCell As String Dim searchRange As Range, DeleteRange As Range
I have the following code (just pasting the relevant section) which crashes when it reaches the highlighted line of code. and a dialog box pops up with the text: "Object variable or With block variable not set"
Sub test() Dim StartRng As Range Dim Buffer As Range
On the attached Excel file, I have code that will insert a variable number of rows and copy and paste from and to variable positions. That all works fine when run from a command button, but when I try to run it from the Worksheet_Calculate by entering 1 in J1 or K1 (inrange cell is J1+K1 for testing purposes) the CommandButton1_Click sub runs continously until an error occurs.
I'm fairly new to macro's and VBA, by searching on the internet i've copied and pasted some code together into a macro. But it ends in a Run-time error 91...
The macro opens a target .xls file in a selected folder, performs copy - paste actions from masterfile to targetfile. Than it filters data in the targetfile sheet1 and copy's the results to the various other sheets; saves and closes the targetfile. The next target file in the folder is opened and the actions are repeated in this second target file. For the first target file this works smoothly; but for the second one (of a total of around 100) it does not copy the filter results to the other sheets in this workbook. The error message i get is: "Run-time error 91:Object variable or with block variable not set." When i hit debug it highlights the line "ActiveSheet.Next.Select" which, at least in the first file, seems ok.
I need a macro that will create a sheet at the end of the workbook.
Sum data from a variable amount of sheets and display that data on the created sheet.
Here is a step by step:
Starting on sheet 5.
Column D has a variable amount of part numbers in it. These part numbers would be different between the ascending sheets.
Column T, U, V has an inputed number in it that would need added up across all duplicate part numbers in all the sheets.
(Note: The data would also need started on row 4. Everything above row 4 is headers)
Here is a small example:
D E T U V 13019090W Part A1 68705500 Part B1 64202900 Part C-11 59634600 Part D1 26005300W Part E1
I need the macro to start with sheet #5(starting on row 4). Check to see if there is data in column T, U or V. If there is, to create a new sheet at the end. And copy the entire line into that sheet (starting on row 4).
After that, to check every sheet after (excluding the newly created one, starting on row 4) for data in Column T, U and V. And then check for duplicates in Column D on the newly created sheet. If there is a duplicate to add/subtract that number in Column T, U and V to the SUM in column T, U and V in the newly created sheet. If there is no duplicate, to copy the entire line to the new sheet.
So that when finished. On the new sheet, you have the SUM of T, U and V for everything that has data in T, U or V for all of the previous sheets, plus the entire line of the first instance (excluding the first 4 sheets).
I am trying to develope a "goto" page macro where the page value maybe 1,34,7A, 256C etc. I am not clear on how an inputbox value can be compared to a string variable or a numeric variable at the same time. This is what I have done, but when the texboxvalue is "7A" it doesn't work.
I Wrote a code which as intended to open each excel file in a folder and copy the data containing in it into a new sheet.
But While running the code the first excel file gets open, and an error message "Run Time Error 91-Object Variable Or With block Variable not set Error"
How to set the file which got opened from the folder to wbk variable.
Code: Sub dataintoonesheet()
Dim i As Integer Dim jk As Integer Dim j As Integer
When i try to run the code below i get the error message - object variable or with block variable not set-
Sub REFRESHXX()
'LIST Cells(Sheets("POINTS").Range("DD801").Value, Sheets("POINTS").Range("DD800").Value).Select Selection.AutoFilter Field:=1, Criteria1:="1" 'SET RANGE Dim sFormula1 As String Dim sFormula2 As String Dim sCell1 As String Dim sCell2 As String Dim sSheet1 As String Dim sSheet2 As String Dim r As Range Dim MyRange As Range 'for testing
With Sheets("Points") sFormula1 = .Range("CY1").Formula sFormula2 = .Range("CY2").Formula End With
'FORMULA IN R1C1 STYLE strFormula = "=IF(ISNA(VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE)),0,VLOOKUP(RC[-1],MASTER!R4C3:R17908C7,3,FALSE))" 'ENTER FORMULA IN ALL CELL RANGES r.FormulaR1C1 = strFormula 'REDUCE TO VALUES Dim ar As Range 'an area is a range For Each ar In r.Areas 'areas are discrete, contiguous ranges of cells ar.Value = ar.Value Next ar
I need my program to: - find the cell containing the string "Datum/Tid" - record the column and the row of the found cell in two variables lCol and lRow
Here is my
Sub test()
Dim rFoundCell As Range Dim lRow As Long Dim lCol As Long
'Find method of VBA Set rFoundCell = Range("A1") Set rFoundCell = Worksheets("Sheet1").Range("A1:Z50").Find(What:="Datum/Tid", After:=rFoundCell, _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False)
'for anyof the two lines down I get the message "object variable OR block variable not set"
I found this nice little bit of code for a date range search in column A but it will not work. Apparently i have not set a variable or something.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim startDate As String Dim stopDate As String Dim startRow As Integer Dim stopRow As Integer startDate = InputBox("Enter the Start Date: (dd/mm/yyyy)") If startDate = "" Then End stopDate = InputBox("Enter the Stop Date: (dd/mm/yyyy)") If stopDate = "" Then End startDate = Format(startDate, "dd/mm/yyyy") stopDate = Format(stopDate, "dd/mm/yyyy") startRow = Worksheets("sheet1").Columns("A").Find(startDate, _ LookIn:=xlValues, lookat:=xlWhole).Row stopRow = Worksheets("sheet1").Columns("A").Find(stopDate, _ LookIn:=xlValues, lookat:=xlWhole).Row Worksheets("Sheet1").Range("A" & startRow & ":A" & stopRow).Select
