Vlookup Possibly Changed - Calculating The Change In The P&L Values
Oct 2, 2007
Currently I am using a vlookup for 19,000 columns or so. Basically what I am doing is calculating the change in the P&L values from when I ran the file currently to when I ran it previously. I have a macro that pastes the old data to sheet "PL Changes" and then the new data on "PL Detail" All the Vlookup is doing is taking 2 criteria(from A and E and comparing them to a concatenated formula in column A on "PL Changes" then returning the old value in column 5. Is Vlookup the most efficient or is Match() any quicker. Right now it takes almost a minute for it to calculate cells and I was hoping to reduce that time as this data may get longer: ...
View 9 Replies
ADVERTISEMENT
Jun 9, 2009
I’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
View 14 Replies
View Related
Jul 27, 2007
I am trying to do a vlookup where the values in the Table_Array have a string appended to them. For example:
I want to look up the string "Example1" and the lookup range is
Example1 - monthly
Example2 - weekly
Example3 - weekly
Example4 - monthly
So essentially I want vlookup to only look at the string before the hyphen. My initial thought was to do something like this: vlookup("Example1", left(A:A, 8), 1, FALSE)
View 6 Replies
View Related
Jul 2, 2009
I have a worksheet containing a cell (say A1) that has a validated list of times (data/validation/list) where the cells in the list contain times in 8 minute increments. The user can select cell A1 and manually select any of the validated times from the list. A vlookup formula on this worksheet uses the content of cell A1 to look for this time in another section of the worksheet. When the time is selected manually, the vlookup formula works properly.
As part of a macro, the macro will change the time in cell A1. I do this in the macro by selecting and copying the desired time from the validation list and pasting it into A1. Cell A1 does change to the new value, however the vlookup formula that uses A1 shows a result of #N/A. If I manually change the time, it again works. I am looking for a way to have the macro change this cell to another time and for the vlookup formula to work as it should.
View 2 Replies
View Related
Dec 6, 2013
Colouring calendar entries based on a date match... VBA to colour a cell on each line based on date match
The code works fine if you change the date in the cell and press enter however my date changes are triggered via a Vlookup which the code doesn't recognise has changed so doesn't trigger the macro.
Is there any way to amend the VBA code shown below so that it triggers the macro when dates are changed in column I via Vlookup?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("I:I")) Is Nothing Then Exit Sub
Application.ScreenUpdating = False
Target.EntireRow.Interior.ColorIndex = xlNone
[Code] ......
View 3 Replies
View Related
Nov 26, 2013
Am currently working on an excel sheet that has values in multiple columns and rows. Simple example would be like
Assume two columns , with column One having a dropdown list to select the value ,
Pencil 2
Paper 3
Pencil 3
Eraser 3
Pencil 3
I want the data to be created in another sheet as
Pencil - 8
Paper - 3
Eraser - 3
I understand that this can be done through pivot table but the issue is when I change the quantity of the item in the source , say reduce pencil by 1 , the same should be reflected in the summation sheet as well automatically .
View 5 Replies
View Related
Mar 11, 2014
I have a cell that has a validation list. When i select a value from the list, i want the value of another cell to change automatically but it isnt working. The list source is pointing to another sheet:
=INDIRECT("DB_DAT!$J$268:$J$275")
I get an error when it tries to change the cell value. Its error no. 1004.
View 3 Replies
View Related
Jun 21, 2012
I would like to create a macro that will automatically change the name of the sheet any time a value is entered into cell a1. For example, in cell A1 of sheet1 I would input "Hello", and then the tab for sheet1 would be automatically renamed to "Hello".
Here's the twist - the workbook will have multiple sheets, and I want all tabs to reflect the value of a specific cell (a1) in each sheet.
For example:
value in sheet1, cell a1 = "Yes" - corresponding tab name would change to "Yes"
value in sheet2, cell a1 = "No" - corresponding tab name would change to "No"
value in sheet3, cell a1 = "Maybe" - corresponding tab name would change to "Maybe"
etc...
The "tab change" cell would always be cell a1 in each sheet.
View 2 Replies
View Related
Jan 3, 2014
How can I get a cell to change color if a user were to modify or change the value of the cell contents?
View 4 Replies
View Related
Feb 11, 2014
I am trying to have one cell (G5) populate with a timestamp when a change is made to any cells in a range (some are merged). The code below worked for a second, until it didn't.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("F8:G33")) Is Nothing Then Exit Sub
Range("G5").Value = Now()
End Sub
*Getting a yellow arrow by the row starting with Range("G5")
View 6 Replies
View Related
Jul 10, 2012
I have 10 excel sheets that are filled with data some 20,000 each.
Some of the descriptions in that row need to be changed.
I wonder how I can create some kind of macro or formatting that will change the text color or the fill color as I make those changes automatically?
I can sort the list after that easy enough, pulling the color text or the fill color.
View 12 Replies
View Related
Dec 4, 2006
Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................
I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.
View 9 Replies
View Related
Apr 18, 2014
Basically it is another sports modelling experiment that I have had (I get the day off work and come up with things like this ), where I just had a curiosity to play out the last games for the top 3 teams in the English Premier League (just to see if I could get some percentages).
The attached, is just the values from one run of my model (I have taken the workings out to reduce the size and for other reasons).
Basically everything to the left of column K, is the model and I am happy with it (and I know goals have to be integers - this is basic);
This plays the games out, and feeds the data into the table at M36 (highlighted yellow), which feeds the data tables at M42 (highlighted green), which are counted to get percentages in the tables (highlighted yellow at M6).
I have put some example output from runs on the second worksheet (so you can see how it works - I like that it suggests Chelsea can win even though it won't be very likely )
Basically you can probably see the problem in cell O22. The percentage chance of finishing first should equal 100% when totalled (e.g. the sum of Liverpool, Chelsea and Man City finishing first, as it has to be one of them should equal 100%). I tracked this back to the fact that I had no way of splitting teams level on points. As a result I added Goal Difference to the model (crudely - e.g. decimal) and here's the question;
How would I go about using Goal Difference to break tie's effectively?
I am thinking I could do some kind of IF function in Q37 (and then have a tie-breaked rank in column R to feed the data tables), on the basis of if anything in N37 to N39 was equal but I am not sure how I would go about applying this.
Example Values_EPL.xlsx
View 10 Replies
View Related
Jul 16, 2014
I need to use the Worksheet Change event in a particular sheet in a specified column which works fine if the data is already there in the sheet and then changed however,the data is in this sheet is actually a Sub-Set of a Main sheet i.e certain filtered records are being copied from Main Sheet and then copied to this IBSL Sheet.
After the data is copied I have to check each record manually and then categorize each record as Fresh , Rebooked , Cancelled , Tranch or On-Hold.....These 4 criterias are added in the Column 38 and the same thing has to be repeated in the column 40 , so when i change the data in the column 38 the same category has to be updated in the same row in the column 40..
But the problem is that the data is first copied from the Main Data Sheet into the IBSL Sheet using a Macro so then this even t gets fired and goes in the DEBUG MODE...
I need this to happen when i change the category manually..I am adding data validation at the same time while copying the data in to the TEMP sheet.
So what can be done to achieve..
View 7 Replies
View Related
May 13, 2009
I want to show which rows of data have been changed by incrementing a revision attribute. For example, if a user changes the contents of a cell anywhere between rows 2 and 13 and col 1 and 9 then the revision attribute in col 10 would increment from 1 to 2 (for the affected row). If another change affects the same row then the rev attribute would increment to 3, and so forth. I don't care which cell was changed only that something on that row was touched.
I thought the CHANGE event was a dead ringer for triggering some VBA code to control this but, since part of the change event code writes the revision value, this triggers another CHANGE event causing an endless loop until something (??) kicks in and stops it after 220 iterations. Is there a way to inhibit the change event just prior to updating the cell containing the version attribute?
Rather than post the code here I have submitted the workbook that includes the whole setup and code. I should also mention I looked at all the other worksheet events and I do not see any "triggers" that would fire each time a cell content is changed. As a side note, is there a way to step into the code of a change event? F8 does nothing.
View 3 Replies
View Related
Sep 11, 2013
I have researched a problem I am experiencing in Excel 2010 and have had problems in the past with previous versions. It seems that occasionally I run across a link that just refuses to break. During my research I have found some reports that this may be linked to the "Name" function. !!!Bing!!! the light comes on. When I copied my template to my new folder and tried to cut and paste data into it I got a message saying something like "A formula or sheet you want to move or copy contains the name "...", which already exists on the destination worksheet." and I opted to replace the existing name with the new one.
Apparently I created an external link at that point and one that cannot now be broken unless I delete my named range and start over the naming process. I mention this here because I see lots of people having this problem and the stock answer is to goto the Edit Links menu and attempt to break the link. Try as they and I might, this doesn't work. I also saw a post about it being a phantom validation problem and that too panned out although I can see how the validation could be linked externally and create this problem.
Does this accurately describes the issue and is there a remedy besides re-creating the "Names"?
View 1 Replies
View Related
Feb 22, 2012
I have two data tables (12 columns each, 60 rows each) in the same worksheet. Ideally, I'd like to conditionally format the 1st table to show if any values changed from the 2nd table.
I see that I can conditionally format each cell to compare to its respective cell in the 2nd table, but would rather not do this 720 times.
View 2 Replies
View Related
Aug 18, 2009
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
View 3 Replies
View Related
Dec 18, 2008
i have data on excel which has the following fields:
Invoice No,Inv.Date,Month,Customer,Part Number,Description,Qty.I want my final pivot table to have the following results for every part no. and description
Total monthly sales
total year sales
and for each model sale calculated as sale quantity / week
I have tried the following way but it did not work:
just next to the pivot table under the heading"AVG" i used the following formula to get the sale/week on cell o6=grand total sale /(applicable no. of weeks).and when i am copying the formula to the cells lying below the formula is being applied as that of the first cell so getting the same result for all the rows.is there a way to calculate sale/ wk within the same table
View 9 Replies
View Related
Nov 23, 2006
I'm having a problem with calculating my formulas. I have it set to auto. I've always had it there. And it used to work fine. But now when I calculate, anything I do to another cell not associated with the ones I'm calculating it makes it recalculate. How do I keep it on auto without making it recalc everytime I do something? Mainly I have an override command on another sheet that enables you to replace the info in a cell (on a diff sheet) if you dont like the product of the calculation. When I make the override for that one cell it recalcs all the info. I just want it to recieve the override for the one cell with recalcing my others.
View 3 Replies
View Related
Jan 27, 2012
Is it possible to change hyperlink as per the cell reference changed in a cell. for example :- in cell D2 the apply a match formula to find out a cell reference (eg "A"& Match function based on info type on cell A1) Now I want to create hyperlink as per the cell reference mentioned in cell D2. suppose I type Red in A1 and D2 give me the cell reference A51 than automatically Hyperlink create for A51. and it continiously changed whatever i type in A1 and what cell reference is showing in D2.
Sheet1ABCD1Type Abbrivation12Full FormACell AddressA13Is it possible that I click on Cell D2 and it goes to particular cell 45Abbrivation6Short CodeDescription71A82B93C104D115E126F137G148H159I1610J1711K1812L1913M2014N2115O2216P2317QExcel 2007Worksheet FormulasCellFormulaB2=VLOOKUP(B1,A6:$B$1000,2,0)D2="A"&MATCH(B1,$A$7:$A$1000,0)
View 3 Replies
View Related
Jul 2, 2012
I was quite a few problems using worksheetfunction.ln() to calculate % change. I decided to write more basic code to try to accomplish this but I'm getting an overflow error.
Code:
DRows = WorksheetFunction.CountA(Sheets("INFO").Range("A:A"))
For r = 1 To (DRows - 1) '***** -1 is bc of ln property
percentchange = 0
newval1 = Worksheets("INFO").Cells(1 + r, 2).Value
old1 = Worksheets("INFO").Cells(1 + r, 2).Value
percentchange = (newval1 - old1) / old1
Worksheets("info").Cells(2 + r, 3).Value = percentchange
Next r
View 6 Replies
View Related
Mar 6, 2009
I have a bunch of start End times in columns calculating total time :-
View 12 Replies
View Related
Jan 9, 2010
I have a large spreadsheet with about 250 worksheets, each of which contains among other things a row of values that require further calculation (the values are being entered manually). The format of these rows is simple:
CodeH343B734G232L383N343M386
Count 1 3 2 4 3 2
Given that these rows are identical in size and they are in exactly the same cell positions in each of the 250 sheets, I need to find a way of getting each of the values entered in each of the 250 sheets automatically copied across to a different sheet and added to an existing total. In my limited understanding of Excel I consider such operation to be similar to a sum function which involves multiple cells in multiple sheets. Despite my best efforts I’ve yet to find a solution to what may be a very simple problem.
View 2 Replies
View Related
Jun 11, 2007
I have a spread sheet which is organised in date order column A and produces three signals Buy, Sell, No trade in column S. If i get a signal to buy or sell the price is taken in column T so i might have Buy - 1.9977. I wish to calculate the diff between the value taken to buy in this eg and deduct this value from the opp signal at some point ie a sell signal. Other buy signals and notrade signals should be ignored. The opposite is true for a sell signal
Eg
A,s,t,u
13/4/07, buy,19955,35
12/4/07,no signal
11/4/07,no signal
10/4/07,no signal
9/4/07, no signal
8/4/07, no signal
7/4/07, sell, 19990,13
6/4/07,no signal
5/4/07,no signal
4/4/07,buy,19977
if a buy signal is generated then in this eg 19990-19977 gives the diff if selling then 19990-19955 gives the diff .
View 14 Replies
View Related
Jul 28, 2006
I created a pivot table in which sales amounts are represented and a derived table in which market share percentages are showed. Now i am looking for a formula that is able to calculate average market share values. Depending on which country i selected in the pivot table and which category, the number of active companies are changed. How can i formulate this formula to calculate average market share percentages in a certain period. check out my attached file to clarify the situation.
View 2 Replies
View Related
Jun 9, 2014
I need to make a table for an injury category per shift per week. (Falls per shift per week)
I have attached an example of the spreadsheet. I have a formula in the table now that was calculating just the injury type per week but just need to add the function to read per shift but can't seem to get it to read correctly.
View 2 Replies
View Related
Jan 23, 2014
I'm trying to calculate total occurrences of a given month. I have included the spreadsheet for reference with totals.
I only want to calculate when the Policy column has a "N". If it has a "Y" I do not need to do anything
If the Policy has a "N" I want the formula to look at the V and P columns and give me a total in the Total Occurrence column. I want it to look at the entire month for a grand total.
If the V or P column has a 4 or less it should equal 0.5, if it has a value is between 4 and 10 it would equal 1. So in the Total Occurrence column should calculate the all of the 0.5 and 1's based on each set of columns and give a total. In the example that I have given in the spreadsheet the total in the Total Occurrence column would be 2 because Jan. 1 has a N and a 8 which equals 1 and Jan. 3 has a N and a 4 which equals 0.5 and Jan. 5 has a N and a 4 which equals 0.5 for a total of 2 occurrences.
View 10 Replies
View Related
Sep 14, 2009
I have a set of values. #N/A413636363632. The #n/a is there on purpose for charting reasons. How do I calculate the stdev of that range? i.e. ignoring the error?
View 2 Replies
View Related
Apr 19, 2006
I have employees that have different number of business days they work. I
need to be able to calculate when the employee has utilized a specific number
of business days specific to the days of the week they work and the number of
days per week work. For example, if I have an employee that works 3 business
days per week (Specifically M, W, and F), and I need to know the date this
employee worked a total of 30 business days, is there a way to calcuate this
date (which should be 6/9/06 if we use a start date of 4/3/06.
View 9 Replies
View Related
