Vlookup- Take Column A From Sheet 1 And Compare To Sheet 2
Feb 15, 2008
I have date on Sheet 1 and Sheet 2
what I want to do is take column A from Sheet 1 and compare to Sheet 2 column A if it's one Sheet 2 then on Sheet 1 column C and D post the results...
ie
Sheet 1
A B C D
ADDYY 64
Sheet 2
ADDYY4644454654
so then Sheet 1 would look like this
A B C D
ADDYY 64 ADDYY4644454654
View 11 Replies
ADVERTISEMENT
Feb 26, 2009
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies
View Related
Oct 7, 2009
I need to fill in the third column on sheet 2 from the 3rd column in sheet 1. do I need an IF statement combined with vlookup??
sheet 1
mark l XYZ l 45
katy l ABC l 3
mark l ABC l 6
katy l XYZ l 45
mark l DEFl 4
sheet 2:
mark l XYZ l
katy l ABC l
mark l ABC l
katy l XYZ l
mark l DEF l
View 4 Replies
View Related
Jul 4, 2014
Basically I am looking for Excel VBA code to compare 4 cell values from 1 sheet to 4 columns on another sheet, but the 4 values on other sheet must be in same rows. I am but a VBA beginner and I have been trying for days with no luck. I want it to go something like this:
IF A5 (on sheet1) = 40 AND B5 < (A value in column M on sheet2) AND C5 < (a value in column E on sheet 2 but in the same row as the previous) AND D5 < (a value in column F on sheet 2, also in same row as previous 2) THEN display model from column C on sheet 2 also from same column into sheet 1 G5
for example (see attachment) on sheet1 if you enter 40 into A5, 3846 into B5, 1492 into C5 and 1999 into D5 Then "MODEL19" (from sheet2) should show up in G5. I had put in a 'button' but it is not needed if there is a better/easier way to do this.
View 6 Replies
View Related
Feb 28, 2009
i need a macro that will compare the p'folios in sheet "Data to Sheet Workings, and then list the p;folios which is in sheet Data but not in workings in Sheet "New", so in the example below this would be ETSTSA ...
View 9 Replies
View Related
May 9, 2009
how to assign values into arrays. I need to compare two sheet (sh1 & sh2), range a2:c20 using array function and get the duplicate values in sheet3.
View 9 Replies
View Related
May 5, 2014
I have 2 excel sheets A and B
Sheet A has full list of (3000) of user names - First Name , Last Name and Email address
Sheet B has few UPDATED users (200) of user names from above list with UPDATED email addresses ( with First name , Last name and email address)
How should I update Sheet A with updates from Sheet B?
View 3 Replies
View Related
May 18, 2014
Macro Button to copy and paste from different sheets, I need to Copy SKU which is in Sheet 1 Column B and Find in Sheet 2 then Copy the UPC on Sheet 2 and Paste to Corresponding SKU in Sheet 1 Under Column C. If an SKU doesnt show on Sheet 2, it should leave Sheet 1 Column C blank and go on with others.
View 3 Replies
View Related
Aug 4, 2014
I need to compare column A of Original.test worksheet to column A of Supplier.test worksheet. If there is a match then copy entire row of the corresponding match from Original.test to Matched worksheet. If no match then copy that row into OnlyInOriginal worksheet.
I have included the workbook and what the output should be. Hope it makes sense. ozgrid.xlsx
View 5 Replies
View Related
Nov 20, 2009
I have designed a spreadsheet and i want a seperate worksheet (sheet3 for arguments sake) to retrieve customer data from worksheet 2 - The data I required is the customer data currently contained on columns A - H and there are around 50 rows. (A2 - I51). I want the seperate sheet to identify entries that have today's date in column I and then list them in Worksheet 3.
Im having difficulties with the syntax for retrieving the data from a seperate worksheet. There may be several entries for the same date and I want to the seperate sheet to report all customer data in worksheet 3? Also, if the date falls on a weekend I would like to retrieve any data for the weekend on the Monday so all cases can be reviewed.
View 4 Replies
View Related
Jun 9, 2007
I want to import data with a web-querie. The data consists of numbers in a column (14 cells).
I want to poll the info in the table in the webquerie every 15 minutes to see if the info in the table is changed. Therefore I refresh the info every 15 minutes, and when the info is changed, than the data must be put in a new sheet in a column and the columntitle must be the date and time that the info is put into the column. Can this be done in vba? I suppose that to compare the info of the new poll with the info of the previous polling the previous info must be put in a "compare" table.
View 4 Replies
View Related
May 14, 2013
I have a sheet1 with following column name Ab,Bb,Cb,Db,Eb,Fb and sheet two contains Ab,Xc,Eb,Sv,Db,Fb,Gm,Cb,Hb these headings are on 7 line of both excel sheet.
Now I want to check each cell under column name Ab in Sheet1 and compare it with all the cells under column name Ab in Sheet2. If both matches then update Cb,Db,Eb,Fb of Sheet1 to the corresponding columns in sheet2 for that column name.
View 1 Replies
View Related
Mar 25, 2014
I have a worksheet, "District", that has names of team members from A2:A (The number of team members will vary, so I would need the macro to stop when the list ends). I need these to be distributed to column A on another sheet, "Input", from A11 down until it hits a row that has a blank cell in column F. I've tried a couple of things, but just can't seem to get it to work.
View 14 Replies
View Related
May 29, 2009
I'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
View 7 Replies
View Related
May 14, 2014
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
View 2 Replies
View Related
Aug 28, 2013
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
View 1 Replies
View Related
Jul 23, 2012
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
View 5 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Mar 14, 2013
i'm having in excel- I'm looking to populate rows in 2nd tab based on the data entered in the 1st tab. The rows to be populated in the 2nd tab resides in the 3rd tab. So a match has to be made on the data entered in the 1st tab. When a match is found on the 3rd tab then the corresponding rows from the 3rd tab should be listed on the 2nd tab.
I have an example.xls attached for clarity.
example.xls
View 4 Replies
View Related
Dec 19, 2008
I want to end up with is when I type text in any row of the Master sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (as per column O). For example row 5's contents from the Master sheet would duplicate into the sheet named Accommodation. In addition, should the details ever change in the Master, this would need to be reflected in the individual sheets also. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie row 5's contents to be placed into row 2 of the Accommodation sheet seeing as it's the first occurrence, and row 6's would go into row 3 etc.
View 2 Replies
View Related
Apr 2, 2008
I am trying to create a macro so that when i save an entry the form sheet looks in the tavela master sheet to see if there is a match on the record number (in the A column) and saves there as an update if it matches and then if there is no match, saves it in the last empty row. this is a column to row copy so it has to be paste special to transpose. also i have a password on the sheet which i use to unprotect then reprotect. i have successfully done these two things separately but cannot combine them! i know not very much about visual basic code just what i have read here and so i am trying to make this code work.
Code:....
View 9 Replies
View Related
Dec 19, 2008
I want to end up with is when I type text in any row of the 'Master' sheet, I would like the entire contents of each row to automatically be repeated on the worksheet of the same name (referred to by text entered in column O). For example row 5's contents from the Master sheet would duplicate into the sheet named 'Accommodation' as O5 contains the word Accommodation.
In addition, should the details ever change in the Master, this would also need to be reflected in the individual sheets. My only concern is that I'd like the individual sheets to fill from the top rather than match the exact row number position from the Master, ie if row 5 had the first occurrence of the word Accommodation in column O, the contents of that row would be placed into the next available first blank row of the Accommodation sheet, which in this case would be row 2 as the headings are on row 1.
View 9 Replies
View Related
Jan 14, 2013
I've got 3 problems I've been trying to solve for the last 7 hours, I think they are all relatively simple to those who know what they are doing but I've exhausted my excel for dummies and every formula I have taken from this siteand tried to adapt. Obviously I'll post each problem on a different post, so here's problem one. The sample is attached. It will consist of about 35 sheets, each documenting the hire of a Motability scooter or wheelchair.
On each sheet column P will identify any review dates. What I would like is: On the Master page in Column C next to the relevant sheet name is for it to display any 'Review' that is flagged up, so that the user can have an overview. There will only ever be one 'Review' per sheet, I can only get the master page to show it by referencing it to one cell, I can't work out how to search the whole column.
View 4 Replies
View Related
Feb 26, 2014
I need to copy columns b,g & h from workbook1 to workbook 2 c ,e, f
workbook1 is the path mentioned in cell A1
Workbook2 is the path mentioned in cell A2
View 1 Replies
View Related
Apr 8, 2008
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
View 10 Replies
View Related
Jan 1, 2014
I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
=IF(ROWS($1:1)>MAX(C:C),"",INDEX(A:A,MATCH(ROWS($1:1),C:C,0)))
I can't get it to work correctly across two sheets.
I've attached Sample of spreadsheet for review : HDForm_Test01.xlsx
View 6 Replies
View Related
Jul 4, 2014
i want to Sort by column E Type,which i can do manually easily.but then i want to run a macro that will copy all the rows with values,ie.Express Checkout Payment Received etc to another worksheet and name that worksheet with Express Checkout Payment Received.
View 1 Replies
View Related
Dec 12, 2008
Can someone help me with this script? What I want to do is paste the next sheets data into the next empty space in (A) of the last sheet. The script works for the first paste but after that it just over pastes the next sheets data on top of what was already pasted.
View 8 Replies
View Related
Feb 13, 2012
I have a requirement to copy a few column(like a,d,e,f) from sheet1 and paste it to sheet2 column.
where column a of sheet1 will be copy to column d of sheet2.if anything data is already there then overwrite that column.
View 2 Replies
View Related
Jan 9, 2009
[data] ...
I have three sheet. named Sheet1, Sheet2 and Sheet3.
Sheet1 being the master sheet. What I want to achieve is:
I want to search for Name in sheet1 with the list of names in Sheet2,
If the name is found, then compare the Age in Sheet1 and Sheet2. If the age matches make an entry in Sheet3 "matched" else "didnt match".
If the name itself is not found on sheet2 , make an entry saying not found.
I am not sure what would be the best approach to solve the problem(formula/VB)...
View 9 Replies
View Related
