VLOOKUP($L4,'[mail.xls] new'!$A$6:$AB$261,6,FALSE)
Which gives me proper result...but the problem i m facing is i have many columns after L4 like M4, N4, O4 and so on....where i have to get the result.
So for that every time i have to paste the above formula and manually change the col_index_num i.e. 6 then 7,8,9 in every column where i use the above vlookup. So is there anyway that it will append the col_num_index by 1....i.e.
i am looking to create a vlookup but with the ability to easily change the column number index so that i can use different columns.
As an example. In a worksheet i have a table with the names of cars in column A starting row 3. Column B to m Row 1 is headed Jan to dec, row 2 same columns is a country name eg UK. Column N to Y row 1 is Jan to Dec again and row 2 of these columns is a diff country say Germany. This repeats for a few more countries. The data within Row 4 for these columns i.e per car is all prices. The table therefore shows the prices of cars per country per month.
I then have a seperate worksheet for each country where the cars are again listed in column A and Jan to Dec is in column b to M but the data is hard coded being the number of cars. I would like to use column N to link to 1 of these months hard coded counts dependant on what month i decide to forecast on. The easy way being that if i wanted to use Jan count number i would link the count for that car type to =b4 etc. Is there an easy way to allow me to change the link should i decide i want Feb ?
The second question is within each countries worksheet i want to bring into column p the countries related car price for a month i select. It may be that the count number differs from the price i select.
I'm trying to set a variable to a column index with:
Set .timecol = (Asc(Column.Value))
"but I get an object reuired error"
I'm trying to perform an index / match lookup that can have a dynamic indexed column.
Sheet1 has the master table and sheet2 is where I'm putting the formula. The table on sheet1 has a RecordID field that uniquely identifies each record and that must be typed into Sheet2 [RecordID] column and then matched to sheet one to identify the record
Code:
MATCH([RecordID],Table1[RecordID],0)
The column headers on Sheet1 are used as data validation for the column [Field] on sheet2. The value of the Field column on sheet two should determine the the column on sheet1 to index.
This is what I have so far:
Code:
=INDEX(MATCH([Field],Sheet1!A:AQ),MATCH([RecordID],Table1[RecordID],0))
I would imagine that the title of this thread made little sense, so let me try to explain:
Sheet A has columns A-C populated with data. Column D needs to search Sheet B columns A-C for a match. (ie, see if the data on sheet A is also on sheet B) if this is true, then it needs to return the value of the LAST column of the matched row in Sheet B.
So, if Sheet A R1 A-C is 1,2,3. Sheet A R1 D needs to search Sheet B for 1,2,3. and when it finds it, (for example on row 9) return the value of the last column of Sheet B row 9. The issue is, the last value could be in column R or S or AA, there is just no way of knowing.
If I have a column of data with a bunch of values (which can't be sorted & which is constantly changing so cant be broken into another column and then sorted) what formula do I need to output the second occurrence of a value in that column?
View 3 Replies View RelatedCan Vlookup use multiple column index. How can I solve my problem depicted in attached file? Is there any solution?
View 6 Replies View RelatedIs there a way to automatically change the column index number in the VLOOKUP formula when copying the formula to columns? For example, when I copy a VLOOKUP formula from column A to column B, the cell references will change, but the column index remains the same. I'd like the column index to be increased by 1.
View 2 Replies View RelatedI've 2 worksheets, Summary and Sales. I need to get the total sales figure from the "Sales" worksheet onto the Summary worksheet. Sales data are pasted onto the worksheet monthly. Tried using vlookup but problem is, the column containing the total sales figure may vary and I need to update the vlookup formula. Another problem is that sometimes the Total sales (the lookup value) is not in the first column. Tried using the Index and Match combo but cannot get it to work. I've attached a simple mock up to hopefully illustrate my case better. I believe the experts in this forum should find this rather easy!
View 14 Replies View RelatedHow can I do the following....if for example I have the following vlookup;
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, 3, false
How can I change the column index i.e. the 3, to reference to a cell.
Code:
=vlookup(A12, 'sheet 2 $A$2:$ID50$, H1, false
The above example doesn't work but I'm sure something can be done using TEXT or VALUE
does it not like dates? i have columns of data and i wish to search it for each month and then print a months worth. here is part of the data. maybe vlookup does not like dates? i tried putting an index column on the left, 1,2,3,4... but it still would not pick up "Jun"
View 8 Replies View RelatedIs there a way to reference a cell value instead of using a static value for col_index_num? For example - Instead of telling it to look in the 5th column of Sheet2, I would like it to look in the column were the heading (row 2) in Sheet2 is equal to the value of O2 in Sheet1.
Here's another example -
Normal formula: VLOOKUP(a2,Sheet2,5,FALSE)
What I'd like: VLOOKUP(a2,Sheet2,column where row 2 equals the value in 'Sheet1'!O2, FALSE)
I have two spreadsheets, one with master file with original data and one that needs to pull in the original data. My issue is all the data to match off of is in the same column, and a number of other files link to the master file, plus it is used externally, so I cannot alter it, and I would rather not create a mock/copy file. Is there a formula that can look for 2 different items within the same column? Would prefer not to use VBA, but if that's the only option I'll take it. I am using Excel 2003.
Here is an example of the setup - I would need the formula to reference off the two different items/categories in the column, so lookup off the 'St. Louis' and following that, lookup off the produce items.
I have a huge list of data where in column A there are customers names. Column B i can see products they are renting and column C-Z are uinits that they are renting on a given date. (lets say c is August 1st, D is August 2nd and so on). What I want is that if i a new tab in A1 enter a given date and A2 a given model, I want in A3 a formula which would provide me with Totals of that product on specified date by all customers.
Customer name
Product
Aug 1
Aug 2
Aug 3
A
Ice
2
6
4
[Code] .......
So lets say If I ente August 2 and as product Blow, I would like to know how many products of Blow are rented on that day. In this case 3 .......
Aged Debts & Comments
Comments consists of the following
Customer number, Date, Comment, Date, Comment, Date, Comment, Etc Etc....
Aged Debts is
Customer number, Current Outstanding, 30,60,90,120.. Comments.
I would like to bring back the last comment which would be the furthest right comment in "comments".
Ex. of COMMENTS
A B C D E F G
0001 17/10/08 Called Cust. 20/10/08 Payment Promised
0002 15/10/08 No Answer 17/10/08 No Answer 20/10/08 letter Sent
0005 15/10/08 Payment Promised
Ex of Aged Debt..........
I am pasting vlookup formulas into a spreadsheet using a macro, and want to change the reference column number based on a variable generated within the code eg
= vlookup(RC1,table,i,false) where i is a predetermined variable in the code
for i=23, I need the result to be of the form
=vlookup(a1,table,23,false)
The below piece of code carries out a vlookup on a defined cells value and produces a result in sheet one, however if the column index number in sheet 2 (Database) is empty the result 00/01/1900 is produced.
I'm not sure how to say leave the result blank if the column index number is blank.
Excel 2010
Userform = Tab 1
Database = Tab 2
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
i wrote the following statement that worked:
'Selection.FormulaArray = "=UserDefault!R[-27]C[-1]:R[-23]C[1]" '
but i need to define the index with a variable
'dim franz as integer
franz = 89
Selection.FormulaArray = "=UserDefault!R[franz]C[-1]:R[-23]C[1]" '
this does not work, is there a possibility to do this? the index from where te values should be read is calculated in the macro, so i can not use fixed values.
I created an Index/Match array forumula in the worksheet. It works.
View 2 Replies View RelatedI have tried the Vlookup formula, and also the index/match formules but I can't get my desired outcome. As you can see the setup is fairly simple. For turnover I want to lookup the values based on Period AND profit center This last bit is my problem, how to define a double criterium.
The idea is to choose the wanted latest estimate (cell B1) and that for turnover, discount etc the values are based on 2 criteria (periode and profit center)
I have also added the desired outcome to clarify my question.
I have a worksheet that has numerical data in A1:A22. In E1:E61 I have set values in numerical order and in F1:F61 I have a letter or letters that correspond to E1:61.
I am trying to write a formula in B1 that will look at the value in A1 and then match it up in E1:E61 and then return the corresponding letter in F1:F61.
e.g: in A1 i have an INDEX and MATCH formula
I tried with the VLookup, and HLookup and neither one worked for me. I have a reference table with all the data, and then input sheet where I want to bring this data by using one of the excel function. ie. When I enter office name on the top of the input page, I would like the Tax ID # in cell C3 to fill in using the excel function from the data on the reference tab. Same with cell C14 & C15. see attached for an example.
View 5 Replies View RelatedI think I need to combine functions to allow me to automate data entry from a table from another worksheet. If the Name entered in column A on Exp Breakdown matches a name in column A of Salary Breakdown I cannot seem to write a function to scan the table in Salary breakdown and lookup the percentage that person is paid from a specific program number. I have attached a sample worksheet to hopefully make it easier to understand.
View 3 Replies View RelatedI have data on two separate tabs. Data in columns A of both tabs potentially match. I am trying to identify and pull the value in column C of the second tab where the values in columns A match and the first instance where the value in column B on the second tab is less than the value in column B of the first tab. The values in both columns B are dates.
column A first tab = column A second tab
column B first tab < column B second tab (first instance of less than)
pull value from column C on second tab to appropriate row of column C on first tab.
I have two worksheets that I am hoping to use to generate one report in excel. Sheet1 contains the following information for my entire work center:
Benefitor Account Dollar Value Document #
Sheet2 contains a list of Benefitors that are relevant to only me.
I want to pull the information from Sheet1 where the benefitors on Sheet1 match the benefitors listed on Sheet2 into Sheet3.
I have a tab that has Employee Name in one column and the benefit they chose in another column. The employee name is repeated a number of times since they have chosen more than one benefit.
I am trying to create a new tab where the employee name in is the first column (only once) and each benefit is listed in separate columns along the top. I want to put an "x" in the column for the benefit the employee has chosen.
Is there a way to say "look for this employee, see if this benefit is what they chose, and if it is, put an "x", if not, leave blank"?
I am trying to get the info shown on table 1 into table 2. I suspect index and match is the answer, but I am not sure.
Table 1 Employee # Deduction Amount 101 AD&D 7.00 101 LIFE 4.00 101 LTD 12.00 101 STD 6.00 101 HEALTH 300.00 101 DENTAL 25.00 105 AD&D 8.00 105 LIFE 6.00 105 LTD 6.00 105 STD 300.00 105 HEALTH 25.00 105 DENTAL 8.00 112 AD&D 7.00 112 LIFE 5.00 112 LTD 13.00 112 STD 5.00 112 HEALTH 450.00 112 DENTAL 37.00 Table 2 AD&D LIFE LTD STD HEALTH DENTAL 101 105 112
I would like to create a spreadsheet with 3 columns: employee ID, last name, first name. Then on the 4th column I would like to enter the employee ID and have the last name and first name auto populate into the 5th and 6th columns. How do I do this?
View 14 Replies View RelatedAttached example file has data with which I need to do the following;
On the tab "part list" I put in the part number in column F. Column C should then be populated automatically by looking up column F in the tab "Lookup" and showing the value found in column B of that tab.
The difficulty with this is, is that when the part number in column F starts with "DN", the lookup value should end with "FD/A" and when the part number in column F starts with "Z", the lookup value should end with "TY/A".
This last part I can't get it to work. I've tried vlookup with a index/match function inside, but it won't work somehow...