Why Won't This Selected Range Copy To Another Sheet?
I have a button on the Players worksheet that has this
Why would it not work?
Range("NewData").Range("B5:B" & Cells(Rows.Count, "B").End(xlUp).Row).Copy
Sheets("Players").Range("A3").PasteSpecial Paste:=xlValues
I am trying to copy Column B starting at B5 down to the last used cell in column B. into the players sheet starting at cell a3.
I try it and it highlights 4 cells and that is it???
Michael
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Range Copy: Differ Depending On The Active Cell That's Selected
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this. The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got 'FindRemove = lstRemove.Value 'If FindRemove = "" Then End ' Goes to the start of the Data column 'Sheets("Staff").Select 'Range("B4").Select ' Tests current cell against FindRemove 'Do 'If ActiveCell.Value = FindRemove Then 'Call CopyPerson 'Exit Sub 'Else: ActiveCell.Offset(1, 0).Select 'End If 'Loop Until ActiveCell.Value = "" 'End Sub
View Replies!
View Related
Userform Won't Load Info From Database Sheet To Invoice Sheet
I have a list box that I'm using to pull customer information from my "Customer" sheet to my "Invoice" sheet. I can actually open, select, and close the userform. However, I can't get the macro to put the information into the specified location on my "Invoice" sheet. Here's my code so far: Private Sub Cancel_Click() Application.ScreenUpdating = False Unload Me End Sub Private Sub customer_Change() End Sub Here is the "Customer" sheet I'm pulling the info from: And here is the location on the "Invoice" sheet that I'm trying to direct the userform to: And here's my userform just for reference: The userform works perfectly until I press the OK button. That's when I get the error.
View Replies!
View Related
Sheet Won't Recalculate
My sheet has a very simple formula in a lot of the cells that simply say this cell in sheet A should equal a cell on sheet B in the same workbook. I deleted the contents of the cells in sheet B, however the cells in sheet A did not update. It still shows the contents of sheet B that were there before I deleted them. The sheet is set to calculate automatically and I even commanded it to force calculation. Any clues as to why my sheet will not update? If I cut a formula from a cell in Sheet A and paste right back, it updates correctly to reflect the cell that was deleted in Sheet B.
View Replies!
View Related
Copy Rows To New Sheet Based On Date Range Selected On A Form
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet: With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too. Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well. I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
View Replies!
View Related
Defined Names Referring To Nonexistent Range Won't Pick Up Once Existing
I have created 500+ defined names that refer to worksheets that do not exist (yet). When I add the previously nonexistent worksheets, the defined names that refer to them are not "live" and do not work in functions where that name is used. If you go into the defined names and click on the ones that refer to the now existent worksheet, they start to work, but I was hoping there was a way around this step (e.g. a simple macro that says "update all defined names"). I created all the names so that the person who will eventually be using this will only have to add an appropriately named worksheet and put the data in...then everything will automatically work. I do not think adding names is difficult, but the person who will be using this does, so I want to avoid that person mucking around in my names.
View Replies!
View Related
Copy & Paste Macro Won't Paste
I want this macro to find in this case "406" in column A which is at the very end of the last block of 160 rows of information. I then want it to move up 159 rows and copy 160 rows of information underneath the last block of information. i.e.go to A5280 , then go to a5121, copy rows 5121:5280 to 5281. It falls over on the very last line of code I can see A5281 selected but it won't paste....
View Replies!
View Related
Copy Rows From Selected Sheet To New Sheet Based On Cell Value
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View Replies!
View Related
Code 'To Invoice' Copy The Filtered List, And Paste On Sheet
I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16. The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel. The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....
View Replies!
View Related
How To Copy Selected Data From One Sheet To Another
Hi excel masters, I have questions on how to built a macro to copy selected the data from one sheet (contains data) to a summary sheet, I used excel 2007. The macro I want to run to achive those result: The data on the data sheet listed similar like below: in first column (contains name) as below, xx xx xx xx yy yy zz zz in the summary sheet, I want to copy one particular name from datasheet to cell A17 and below, based on the the selection criteria I enter in cell B1. For example, if I want to show xx in summary sheet, I input xx in cell B1, and run macro to list xx one by one from A17, A18, A19.... I need to macro to run to search entire list to include the value I selected.
View Replies!
View Related
Copy Selected Records From One Sheet To Another
I have a sheet with the pricelist and a sheet with the actual price offer. I would like to copy selected Items from the price list to the price offer. I dont want to do that by copy and paste method. I would like to create check boxes, so that I can check / uncheck each Item I want to be copied and then press the button copy to the price offer ... how can I do that. I asssume I would need a macro for that. The columns in the pricelist and the price offer sheet will be identical of course.
View Replies!
View Related
Copy Selected Data Onto New Sheet...
I have a button the brings a dialog box with a list box. on selecting a figure in the listbox and clicking 'OK' the figure is transferred to a cell in a worksheet. The column under this cell has a formula with the result True/False. The autofilter then selects only 'True', and then should copy the active range to a new sheet, preferably named according to the value first selected. It must be possible for the user to have several of these ranges copied to different sheets for printing purposes, which is not a problem as this already works with the code.
View Replies!
View Related
Copy Cells In Selected Row To New Sheet
I would like some code to allow the user to select any row in Sheet1 and then the populated cells (10 in every case) in that row will copy across to various locations in Sheet2. eg, The user selects Row header for Row 12 which has 10 cells ( A12 to J12) populated. A12 will go to C3 on Sheet 2, B12 to D5, C12 to D9, etc, etc.
View Replies!
View Related
VBA- Can't Paste Into A Newly Selected 'activecell'
I am new to VBA and was just wondering if there is logic behind this or am I doing something wrong.... ie, 1 Cells(1,1).Select 2 Activecell.Copy 3 Cells(2,1).Select 4 Activecell.Paste The above doesn't work but if I use the same above 3 lines with 4 Activesheet.Paste it does work What is logic here as to why it can't paste into a newly selected 'activecell'?
View Replies!
View Related
Run-time Error '1004' :: Method 'Range' Of Object'_Global' Failed
I am trying to create a macro in my personal macro book such that whenever any workbook is opened the calculation settings (tools, options, calculation tab) are set to semiautomatic and do not calculate before save. The macro works when I am opening Excel itself (Book1) but when I open an already saved file it gives me Run-time error '1004' Method 'Range' of object'_Global' failed From there I choose Debug, the VBE window comes up, and I hit F5 to continue the code without doing any actual debugging. Here is the code that I am using. This is in the Personal Macro book on the "This Workbook" section....
View Replies!
View Related
Run-time Error '1004' Method 'Range' Of Object '_Worksheet' Failed
I have an interesting error that only happens when there is one row of data in the worksheet (sheet2 or "Half Payout"). Rows 1 & 2 are headers, row 3 is when the data starts - if any. With either no rows of data or more than one the coding works just fine. Here is the exact error message I'm getting: Run-time error '1004': Method 'Range' of object '_Worksheet' failed. The following code is supposed to sort the rows of data when opened and then activate the first open cell below B2.
View Replies!
View Related
Run-time Error '1004': Methd 'Range' Of Object '_Global' Failed
I have constructed the following code to set the print area of worksheets that have been selected to print to the range referenced in a worksheet level named range "xPrintArea". This named range is set using the OFFSET function. The procedure also sets the left footer to be a copyright notice that is also contained in a cell referenced by a named range. Set oPrintArea = Range(sPrintAreaName) is generating the error "Methd 'Range' of object '_Global' failed". Note that the line Set oCopyrightNotice = Range("CopyrightNotice") does not generate this error. From what I've been able to determine from other research on this forum and others, I believe the problem is that I need to more fully qualify the object which Range(sPrintAreaName) is referencing. I've already tried to use Set oPrintArea = wkSht.Range(sPrintAreaName).................
View Replies!
View Related
Copy Selected Range To A New Workbook
I have a code that will allow me to copy three worksheets from an open workbook to a new workbook. That works great, but I only need only a selected range from each of these worksheets to be copied (Range A1:AV60). Here is the code I use to select and copy the worksheets, how do I add a range within this code for each worksheet. Sheets(Array("Req Page 1", "Req Ext 1", "Req Ext 2")).Copy
View Replies!
View Related
Copy Selected Range To New Workbook
I am trying to create a method to select the values of contiguous range selections on excel worksheets. Users will be making new worksheets in new workbooks out of the data from the old sheets. Currently users make a selection is and copy it to a new worksheet. Is it possible to retrieve from the 'clipboard', the values from the associated cells? And then to parse them into columns in a new worksheet? Earlier I tried this bit of ( it didnt work ) Sub AddNew() ' for passing highlighted text into the form so that I can pass it 'to a new workbook. Dim PassData1 As String Selection.Value = PassData1 Set NewBook = Workbooks.Add With NewBook .Title = "xxx" . SaveAs Filename:="xxx.xls" End With Range("A1").Value = PassData1 End Sub
View Replies!
View Related
Command Button: Copy Row Selected On Sheet2 Into Cells On Sheet 1
figuring out a code for a command button. I have 2 sheets open with the following set up: Sheet1 A2 = Name (chosen off sheet2) A3 = Job Title (chosen off sheet2) A4 = Department (chosen off sheet2) Sheet2 Column A = List of names Column B = Corresponding Job Title Column C = Corresponding Department I need to be able to choose a name off sheet2, click the command button and it send selected name, job title, and department to sheet1 to the respective cells.
View Replies!
View Related
For/Next Loop Won't Start
I'm sure I just need a change in the line of code in red, but can anyone see why when the code reaches the For/Next loop in red it just jumps over it and goes to the End With line? FYI - The code is supposed to check (select) the boxes in ListBox1 if any item in the list it's creating matches the value found in Sheets("Zone Associations").Cells(Rng, sZone)
View Replies!
View Related
Excel Won't Quit
I'm having a bit of a issue at getting Excel to fully shut down. it is still running in the Task Manager. There is a bit of infomation on the net about but i can;t seem to make it go away. I'm using Excel 2007 and running VBA code out of MSaccess 2007 Heres my code.
View Replies!
View Related
Won't Let Me Save My File ...
Excel won't let me save my file! When i try to save it it says "Your changes could not be saved to "*.xls", but were saved to a temporary document named "F65aa000". Close the existing document, then open the temporary document and save it under a new name". Every time I try to save it under an existing file name, it won't do it and the existing file is then renames to some alphanumeric file and the same message appears. This file contains macros that took a long time to do!
View Replies!
View Related
Function Won't Return Value
I'm trying to get a "simple" function to return a number and not the #NAME?error! I'm writing the following vba code. It's located in the sheet1 vba code area. On the spreadsheet itself, on sheet1, column C, there is data from row 1 down to row 55. I have tried formatting the Column as General, text,etc. Function Asset() As String Asset = Range("C1").End(xlDown).Row End Function When I type into the spreadsheet =Asset() , I get the #NAME? instead of the number 55. When I step through in debug mode, Asset shows Asset="55" , but my function doesn't return it!
View Replies!
View Related
Picture Won't Delete
I am working with a spreadsheet created by a predecessor and there is a picture at the top of one of the worksheets. When I select the picture and hit Delete, it seems to work, but the picture is still there. When I move it around the worksheet and resize it, a copy with the same name ("Picture 47") remains in the spot I moved it from. When I delete the resized/moved picture, it deletes, but the picture still remains in the original spot. When I record a macro and select the picture and hit delete - or even when I move the picture and resize it - the recorded macro is blank. All of the pictures seem to be named "Picture 47"
View Replies!
View Related
Formulas Won't Refresh
The below is my problem. I have a excel wokbook that contains 2 reports from an outside source and on top of the reports i have some excel calculations.One of report has drill down capability. Everytime i open my excel workbook and refresh it the excel forumals also get refreshed along with my 2 reports and i get my results. But when ever i drill down something on the report the excel formulas are not getting refreshed automatically. I end up refreshing the whole workbook to get the correct results which is a very time consuming process considering the amount of data i am trying to pull. And drilldown is something the users do very often and they don't like refreshing the whole workbook. Is there any way to update the excel functions automatically whenever i drilldown?
View Replies!
View Related
A UDF That Won't Update By Itself..
I have a UDF that looks up data in another worksheet (called "Capital Costs") to create data for the worksheet in which I enter it. This is the first UDF I have ever written, so I must be doing something wrong. It works just fine--once. But if I go into the "Capital Costs" worksheet and change the data there, it does not automatically update the cell in the other worksheet with my UDF. I have to erase my UDF and reenter it for it to grab the new data in "Capital Costs". (I have tried hitting F9, and that doesn't update the UDF.) My UDF is "=Capex(year)". So let's say my year 1 Capex was $50,000. The UDF calculates that and populates the cell correctly. But if I go into the "Capital Costs" worksheet and change the year 1 Capex to $60,000, the UDF (which is on a different worksheet) doesn't automatically update. I would like it to automatically update, just the same way it would if it were a built-in function like AVERAGE or SUMPRODUCT or STDEV.
View Replies!
View Related
Why Won't Files Close
I am using Excel 2003 in a Windows XP environment. No other workbooks are open. I have a macro that runs in Workbook(1). It will determine a list of Excel files that exist in a specified directory. For each file found it will; 1. Open the file ( Workbook(2) ) 2. Perform a bunch of stuff 3. Saves the file under a new directory/name. 4. Closes the file opened in step 1. 5. Deletes the file referenced in step 1. Steps 1 through 3 are working fine. What I am seeing is the files opened in the various step 1’s are not closing and eventually Excel runs out of resources. When I look under the Window menu, I see them all active in the list. I think when I saved the files in step 3, it created a new Workbook in the collection and the indexing at step 4 is hosed, but do not know for sure. I should be using for effective actions on steps 4 and 5? Sub RHXLProcess(vRHXLFileName) On Error GoTo lblRHXLProblem 'Open the file without updating Workbooks.Open Filename:=vRHXLFileName, UpdateLinks:=0 'Determine the file based information
View Replies!
View Related
Text Won't Wrap
I have a worksheet where i need three columns at fixed widths and in one of these columns i need the text to wrap. I have a macro and have included a wrap text function in it but it doesn't seem to wrap text!! No cells are merged and the row height has not been altered from the default height. I would very much appreciate if one of you could look at the macro(pasted below) and tell me why the text won't wrap. I have looked through forums and found answers to this question, but none of the solutions I have come across seem to work
View Replies!
View Related
Copy Selected Range & Save To Text File
I also use VBA in a terminal emulation program that I use the following command to 'screen scrape' the current display memory and quickly Save it to a .txt file: .SaveDisplayMemory "C:File1.txt", rcOverwrite What I want to do in Excel is, Copy the current selected Range() and Save it to a .txt file. I know how Save the current Sheet to a .txt file, but can't figure out how to Save just a Range() of cells.
View Replies!
View Related
Run Time Error 1004 - Method 'Range' Of 'Object'_Global' Failed
I am trying to build a macro which will format the columns of a spreadsheet - basically it inserts some columns, writes formulas and highlights them. Here is a code I have got so far... When I try to run this I get a run time error 1004 - Method 'Range' of 'Object'_Global' failed. The part of the code Range("N2:N").FormulaR1C1 = "=(RC[-7]/RC[-2])" is highlighted in the debugger. Can anyone tell me why this is happening, also it would be great if you could suggest better ways of writing this code - as I am new to vba programming and most of my macros are built using the recorder and then 'working' on them.
View Replies!
View Related
Macros Won't Work With Decimals
I've been trying to create an excel macro to calculate shortest route path using floyd algorithm.. Problem is, i can't figure out why this macro won't work with decimal numbers.. I'm pretty sure there's a VERY simple explanation for this.. Probably has something to do with excel's formating See the attachment and press Run button, it won't produce the correct result, but if if you multiply all the numbers in "input" sheet by 100.
View Replies!
View Related
Cell Formatting Won't Update
My problem is the data and getting the formula's to read it. I copied and pasted the data from a pivot table and the columns are set to accounting two digits. But thats not what shows in the cell. Each cell shows many digits. The formulas are working now if I put the curser in the cell and select return. The values then update to the accounting format it is supposed to be already and everything works fine.
View Replies!
View Related
Three Little Words Won't Change To All CAPS
I was handed an Excel Spreadsheet containing a list of names. Within the sheet there are three names (Elizabeth, Amy, and Daniel) that contain upper and lower case letters. The desire is that all names are in CAPS. However, these three names refuse to remain as CAPS when overwritten in the cell. As a note, other names can be typed in those cells and will successfully remain as typed, either U/L case or all CAPS. Another note, if the Replace feature is used, the names remain as Replaced.
View Replies!
View Related
Macro Won't Update Pivots
I have a macro that is supposed to update 3 pivot tables with the change to just the first one but it doesn't work. Can anyone help? Here is my code but nothing happens when I change the first pt (C & S). It doesn't update the other 3 tables. Private Sub Worksheet_Calculate() Dim PF1 As PivotField Dim PF2 As PivotField Dim PF3 As PivotField Dim PF4 As PivotField Dim x As String Application.EnableEvents = False Application.ScreenUpdating = False Set PF1 = ActiveSheet.PivotTables("PivotTable4").PageFields("State") Set PF2 = ActiveSheet.PivotTables("PivotTable3").PageFields("State") Set PF3 = ActiveSheet.PivotTables("PivotTable2").PageFields("State") Set PF4 = ActiveSheet.PivotTables("PivotTable1").PageFields("State") x = PF1.CurrentPage PF2.CurrentPage = x PF3.CurrentPage = x PF4.CurrentPage = x Application.ScreenUpdating = True Application.EnableEvents = True End Sub Pivot Table 4 = C & S this is one I want to make the change to Pivot Table 3 = Sales Pivot Pivot Table 2 = 2005 Pivot Pivot Table 1 = SMG Pivot
View Replies!
View Related
Transpose Won't Work, Perhaps A Macro Will
I am sent an email that contains multiple blocks of information. They're broken down like this: Title Link ID Department Date Status Value News There are about 100 of these blocks of text in the email, and some of them are duplicates. What I'd like to do is copy them into Excel, and run a macro which separates them into the appropriate column and removes the duplicates. The problem that I'm running into is some of the blocks have a value (highlighted in red above) and others don't have anything at all. I'm looking for a solution that will be able to evaluate the text and if the cell after Status isn't value, I'd like it to insert a blank cell, a cell that says ignore, or something that will keep the format correct.
View Replies!
View Related
Number Field Won't Accept Zero
I have a cell tha't set up as a number format with the validation only accepting 3 whole number characters, however if the number is 098 then it converts it to 98. I need for that cell to be a number type format and to accept 0 as the first character. I thought I tried everything but I'm sure I'm missing something.
View Replies!
View Related
My Macro Won't Run For Other People
It runs fine for me, but when others (who are using Excel 2003) try to run it, it won't fire. The second macro entitled "Delete Foothill" runs fine though. "Run Foothill won't fire. Sub Run_Foothill() Sheets("Foothill Plaza (Weekly Call)").Unprotect Password:="Foothill" ' ' Run_Foothill Macro ' ' Sheets("OC").Select Range("B37:C44").Select Selection.Copy Sheets("Foothill Plaza (Weekly Call)").Select Range("B4").Select ActiveSheet.Paste Range("A12").Select Application.CutCopyMode = False Selection.Borders(xlDiagonalDown).LineStyle = xlNone Selection.Borders(xlDiagonalUp).LineStyle = xlNone Selection.Borders(xlEdgeLeft).LineStyle = xlNone With Selection.Borders(xlEdgeTop) .LineStyle = xlContinuous .ColorIndex = 0 .TintAndShade = 0 .Weight = xlMedium End With
View Replies!
View Related
Looking Up Data That A Lookup Function Won't!
I have store numbers and store volume groups (one letter indicating their sales volume). This is sorted in somewhat of a table - the volume groups are in row 4 going horizontal, the store numbers are under their respective volume groups going vertical. I have all store numbers listed vertically on another sheet, starting in A2. I want to search for the store number in A2 within the volume group data and return the appropriate group header when it's found.
View Replies!
View Related
Why Won't This Write My Text File
I have verified that there is data in the worksheet...but while the text file is created and properly closed, nothing is written to it. Sub ScoresToDeko() 'writes a text file Dim Scores As String Dim CRLF As String Dim count As Integer Scores = "" CRLF = Chr$(13) & Chr$(10)
View Replies!
View Related
Columns Won't Stay Formatted
I have Excel 2008 for Mac (vers 12.0). On a basic spreadsheet, the first column is for date which I have formatted so I can type in 15/8/9 and it appears as 15-Aug-09. However, each time I open Excel after having Quit it, I have to reformat the cells in this column again as they revert to converting my date input with something like 39,123. My other columns are formatted to currency and are always okay.
View Replies!
View Related
|
TRACKER
