Create Multiple Charts On Multiple Sheets?
Apr 14, 2014
The macro creates multiple charts from data in one sheet, but now when I'm trying to scale it up to multiple sheets, the previous charts created disappear. E.g Creates 5 charts for sheet 1 (can see them being created, using debugger mode), looping to the next chart and they are created but the first ones has disappeared! What am I doing wrong? I'm creating my chart by the following code:
[Code] .....
The startpoint variable is changed for every new chart within the one sheet and the outputsheet is changed when you change the sheet.
View 4 Replies
ADVERTISEMENT
Aug 18, 2012
I'm trying to create multiple Charts with VBA, each chart on a seperate Sheet. The link below works but i need to change it some and i'm stuck. What i'm trying to do is create a new sheet for each new graph, but I need it to create a graph for the 250 associates in column B then plot 52 weeks of their % from the Row their name shows up in. First name is in (B3), his % data is in range (N3:BO3). I have the weeks numbered out 1-52 in (N2:BO2) and i'd like their name to appear in the Tab and on top of the graph. I applied the VBA code from the link below to my sheet and changed what i knew i needed to change, but it debugs. I use to do each graph manually when i had 25 associates but i would like to use this for the whole building now.
[URL]
View 9 Replies
View Related
Apr 2, 2014
I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.
However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").
[Code] .....
View 1 Replies
View Related
May 9, 2009
I need to create 63 charts from data which I have in two columns. I want to create multiple charts using one macro. For the first chart I want it to use cells K2:K80 as the x values, and M2:M80 as the y values. For the next chart I want it to use cells K81:K159 as the x values and M81:159 as the y values. For the next chart I want it to use cells K160:K238 as the x values and M160:M238 as the y values. I want to continue this, creating a chart for every 78 cells of data, all the way until the 63rd chart which uses K4900:K4978 as the x values and M4900:M4978 as the y values. I have created the following macro by " recording." This macro generates the first chart that I want:
Sub Macro5()
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlXYScatterSmoothNoMarkers
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).XValues = "=Sheet1!$K$2:$K$80"
ActiveChart.SeriesCollection(1).Values = "=Sheet1!$M$2:$M$80"
ActiveChart.ChartType = xlXYScatterSmoothNoMarkers
ActiveWindow.SmallScroll Down:=-3
End Sub
How can I alter this macro to create all 63 charts?. It seems like there is an easy way to do this, but I don't use macros very much (at all).
View 2 Replies
View Related
Jun 26, 2008
I need to make a macro that creates a specified number of graphs depending on the file's number of data sets. I know the number of sets that are in the data, and I know the number of data points that were taken. Here is what I have:
Sub Graphs()
Dim Startpoint As Integer
Dim Endpoint As Integer
Dim count As Integer
Dim xStart As String
Dim xEnd As String
Dim NumberSets As Integer
Dim yStart As String
Dim yEnd As String
Dim DataSet As Integer
Dim Data
Startpoint = 11 'The first set always starts in row 11
Endpoint = Range("L4").Value + 10 'Thefirst set always ends after the value of L4+10
NumberSets = Range("L7").Value 'number of times I need the loop to work
count = 1..........................
View 2 Replies
View Related
Aug 28, 2013
I have about 9 different sheets, but they all will have 4 types of graphs (totals, comparison, bydate, trend). I am writing vba to conditionally show one type of graph on every sheet. For example, if I want to show the totals graphs, I want all of my sheets in the workbook to update. I can already make the graphs go invisible and visible on one sheet, but I would like to do so on all sheets. Here's my code now:
Code:
Sub UpdateGraph()
Sheets(".graphManager").ChartObjects("Totals").Visible = False
End Sub
[Code]....
But no luck. I do not want to manually type all the sheet names into an array because I may add more sheets in the future and don't want to keep changing the code. How can I loop through all sheets and set a graph named "Totals" to invisible? Or can I just set all graphs in the workbook named "Totals" to invisible without looping through the sheets?
View 3 Replies
View Related
Jul 16, 2009
i have a master Sheet which have 15000 Entries (A:A15000) many are Duplicate, Unique is 63 . Now i want to make the 63 Sheets in a Same Workbook as per these Entries.
I record the Macro for the first 7 Sheets. Now how can I Modifiy this Macro to 63, Instead of record again for another Entries.
Actually, I have recevied a File some time it has 15000 Company Names sometime 20000 and sometimes 2000, Now i want to Make the Sheets according to Company Name Wise.
Now , i know how to record the Macro, but i want to know how to Modifiy the Macro.
" How to Learn and Modifiy the Macros"
My code
Sub CreateSheets()
'
' Macro1 Macro
' Macro recorded 7/16/2009 by AAditya
'
' Keyboard Shortcut: Ctrl+w
'
View 9 Replies
View Related
Apr 5, 2013
how to create multiple sheets ? in a workbook if i want to create multiple copies of the same sheet, what is the shortcut method to do that?
View 5 Replies
View Related
Mar 5, 2014
I got an employee list from couple of Site in different sheets it contains Employee name & Department but not a continued list, i.e.
on the attached file, i am looking to populate Summary Sheet, no of Sites, deparments & agents varies.
I want the Site, Department & Agent Name to Populate into one continues list without empty cells .
View 4 Replies
View Related
Mar 13, 2014
I have CASHBOOK Worksheet and I want to create a LEDGER Account in Multiple sheet
View 2 Replies
View Related
Mar 4, 2014
My boss requires me to prepare forms for vouchers that we release to our suppliers.
I encode the details manually to excel with his prescribed format. each voucher are encoded on separate sheets on one file.
Now he requires me to prepare a summary for all the voucher forms which is now becoming a pain since i now hold 50+ suppliers. and each day i encode about 120 vouchers.
I found through this forum that there is a way to automate tasks on excel like preparing a summary sheet.
View 3 Replies
View Related
Aug 19, 2009
I have data contained in matching cells from several sheets. I need a worksheet that reflect the summary of the data from the worksheets. No formula is required. I just want my summary worksheet to list the all the data from my other worksheets. I might end up having about a hundred worksheets that I need included in the summary. Attached is a sample. It would be better if the summary automaticaaly updates as new worksheets are added.
View 3 Replies
View Related
Dec 16, 2009
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
View 6 Replies
View Related
Nov 10, 2011
I'm trying to create a workbook with multiple worksheets. My first sheet to be named "Main" and each additional sheet to be named in sequence after the values in the cells between B5:B98 on !Main.
Example:
B5 = "01"
B6 = "01.1"
B7 = "01.2"
B8 = "02"
B9 = "03"
etc...
I'd like to have a macro that would take a worksheet in this workbook named "Template" and make a copy for each cell between B5:B98 and name that new worksheet "c" and then the value in each of those (B5:B98) cells.
Example:
First worksheet named "Main"
Second worksheet named "c01"
Third worksheet named "c01.1"
and so on.....
View 1 Replies
View Related
Oct 1, 2007
I have a worksheet with a list of project managers and a bounc of data on them.
How can i make a new file with sheets for every project manager in the list and copy the data for each one into his own sheet ?
Every project manager has many lines (there are about 200 managers and 30 000 lines and 30 columns )
I have managed to create a sheets for project managers from a list of unique entries but that's all.
View 9 Replies
View Related
Aug 6, 2007
I am trying to use VB to create 50 charts each with 3 lines using data from 3 different excel spreadsheets in the same workbook. I am able to create one chart with 3 lines using data from the three spreadsheets, this is good. However I exprience problems when i try to insert a loop to create 50 charts that correspond the the rows in each spreadsheet. I am new to VB and am very inexperienced with VB. In each worksheet my data is arranged in rows. row 1 of each worksheet has the header information and rows 2 through row 50 have my corresponding data. for example A2 lists the name and F2 through T2 lists the data. I have tried a bunch of different things but nothing seems to alllow me to be able to create multiple charts which correspond to each row of data?
Sub Chart2PPT()
Dim arow As Integer
Dim acol As Integer
Dim StartPoint As Integer
Dim EndPoint As Integer
Dim rStartPoint As String
Dim rEndPoint As String
StartPoint = 2
EndPoint = 4
For arow = 2 To 5
rStartPoint = "f" & StartPoint
rEndPoint = "t" & EndPoint
Charts.Add
ActiveChart.ChartArea.Select
ActiveChart.ChartType = xlLine 'Type of graph........................
View 2 Replies
View Related
May 5, 2014
New to using Excel formula's and am trying to create an IF/LOOKUP formula to look at multiple sheets within a workbook and display the information within the 'compare' sheet.The yellow cells are where data will be entered.
What I am trying to achieve:
Type the store numbers on the compare sheet (B2 and D2). For the sheet attached I have put 190 (in B2) and 2012 (in D2)
B2 store shows the predicted and actual values of 190 in columns B & C
D2 store shows the predicted and actual values of 2012 in columns E & F
(No need to worry about variance and difference columns)
So, if I change the store numbers in B2 and D2 to any of the sheet numbers, I want it to display the correct info for that particular store within the compare sheet.
I have attempted a formula, which you can see... I have basically looked at some previous sheets that had IF and LOOKUP on it and tried to replicate that for my sheet, but with no luck.
View 3 Replies
View Related
Feb 19, 2012
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
View 5 Replies
View Related
Jul 2, 2014
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
View 8 Replies
View Related
Aug 11, 2014
I am trying to create a formula which looks in 1 cell to determine 'IF' it states either "BUTT CUT" or "DIE CUT" and then does a VLOOKUP in a table array for each which ever column relates to asnwer to 'IF statement.
This is as far as I have got but even this won't work:
=IF(I15="BUTT CUT",=VLOOKUP(J15,V13:Z22,2,FALSE))
View 7 Replies
View Related
Jun 22, 2006
Is it possible to make multple worksheets from a selection of multiple cells?
This would mean a selection of 10 cells would generate 10 sheets titled with the cell conent.
View 14 Replies
View Related
May 9, 2008
I have one main Excel file with information (in example file - columns A & B). I want to create 4 other Excel files that will draw from the main one (in example file - columns D, F, H, & J). I want the information in Excel file A, B, C, and D to be continuous information that matches the main file. For example, the letter A matches up with numbers 1,3,4,10,11,13,15,17, and 19 in the main file. When I open Excel file A, I want a continuous list of these numbers. And I want this for all 4 Excel files which draw from the main one.
View 2 Replies
View Related
May 6, 2014
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
View 5 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related
May 28, 2014
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
View 2 Replies
View Related
Jan 20, 2009
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
View 5 Replies
View Related
Oct 8, 2007
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
View 11 Replies
View Related
Apr 21, 2013
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
View 4 Replies
View Related
Jan 5, 2014
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
{=INDEX(Jan!$B:$B,SMALL(IF(Jan!$A:$A=Smith!$A$2,ROW(Jan!$A:$A)),ROW(1:1)))}
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
View 3 Replies
View Related
