i want to create dynamic Excel Charts in one sheet ,The sheeet contain dynamic columns and rows and i want to create for each 4 columns a chart in a new sheet ,i started to try it in VBA and didnt founs the way to select 4 columns as a range, i succeseed to do it with msgboox that the user enter the range but i want to do it in a loop
View 9 RepliesI need a macro to create the following worksheets and charts from an Excel data set:
Three (3) worksheets (already created manually in attached Excel file):
1. Chart Data.
(a) Column A in Chart Data is always numbered 1 - 600 (50 years x 12 mos/yr).
(b) Column I and column Y data sets (from Prod_Month) created in Chart Data. Each data set can be identified and collated with column F in Prod_Month (API) which is unique for each dataset.
2. Rate vs. Month - plot of Daily Gas (col. Y in Prod_Month) vs. Months (col. A in Chart Data).
3. Rate vs. Time - plot of Daily Gas (col. Y in Prod_Month) vs. Calender Time (col. B et. al. in Chart Data)
At a minimum, could someone help me create the Chart Data worksheet from the data in PROD_MONTH? Charting all the columns takes time from Chart Data but any data manipulation macro(s) help.
My DB is in table format . I use this table as source data for 2 barcharts and 1 pie chart.Following are my table headers
Costs|exp heads|Month1|Month2|...|Month n|Spark lines|Average
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
I need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
I need to create 63 charts from data which I have in two columns. I want to create multiple charts using one macro. For the first chart I want it to use cells K2:K80 as the x values, and M2:M80 as the y values. For the next chart I want it to use cells K81:K159 as the x values and M81:159 as the y values. For the next chart I want it to use cells K160:K238 as the x values and M160:M238 as the y values. I want to continue this, creating a chart for every 78 cells of data, all the way until the 63rd chart which uses K4900:K4978 as the x values and M4900:M4978 as the y values. I have created the following macro by " recording." This macro generates the first chart that I want:
Sub Macro5()
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlXYScatterSmoothNoMarkers
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).XValues = "=Sheet1!$K$2:$K$80"
ActiveChart.SeriesCollection(1).Values = "=Sheet1!$M$2:$M$80"
ActiveChart.ChartType = xlXYScatterSmoothNoMarkers
ActiveWindow.SmallScroll Down:=-3
End Sub
How can I alter this macro to create all 63 charts?. It seems like there is an easy way to do this, but I don't use macros very much (at all).
I am trying to create a Macro to pull from a list and then update the charts and print. I have a list that has over 100 clients. I believe I need to loop but I am not familiar with VBAs at all. Below is what I am trying to accomplish.
Sub Update()
'
' Update Macro
'
'
Selection.Copy
ActiveSheet.Next.Select
Range("B2").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Calculate
[Code] ......
I am looking for a macro that will allow me to create a dynamic range based on the settings I give it. I would like the dynamic range to be called tracking_number and it to have a reference to =Offset(MainReport!$A$2,0,0,COUNTA(MainReport!$A:$A),1)
If this is possible I would really appreciate it. The reason I need this is because I have 2 workbooks. They are the one with the MainReport in it and then the Master workbook. Every day the workbook containing the MainReport is overwritten with more data, so I can not store a dynamic range and reference it each day.
I am have average excel knowledge with formulas and I am relatively new to the creation of Macros. I was told by my boss that he wants me to create a Macro that will palce a time stamp in the bottom left corner of the page (via the footer) that updates automatically every time a sheet is worked on. Please provide any help or assistance that can get me through this task.
View 11 Replies View RelatedI have a spreadsheet that calculates a value for each age up to 65 on a separate row. I have parameterized the spreadsheet so that depending on the age entered by the user, any row below the age 65 calculation row is blanked out (set to "") with an if statement.
After a new age is entered I would like a line graph to compare the values. My problem is that if I select all of the possible data values (I assume none are less than 20, therefore there are 45 rows of formulas) any rows that have blank values show up in the chart. My data starts in cell A1.
I would like to come up with a macro that accomplishes the following . . .
- determines the number of the lowest row that has a number value in it (since there are formulas below this, Ctrl down does not do this correctly)
- set a named range starting from cell A1 based on x rows (calculated in the prior step) and y rows (constant)
The "Sum" sheet can change its number of rows. The pivot table is based on it. I'm having trouble with the SourceData portion of the code in my macro ....
View 9 Replies View RelatedI've just read up on interactive charts and have got that sorted for my worksheet. But I have a slightly more complicated issue now...
The worksheet Logistics has results for 76 different tests and these tests have been taken multiple times. Hence, I can logically have a trendline of results for every test i.e. Test 1: 1/1, 2/2,3/3 etc...
I'll go nuts creating 76 charts...and it's a terrible messy way of getting the user to see how he's fared over the number of times he's taken a particular test.
What I'm looking for is a way for the user so indicate which test he wants to see the results for and the relevant results to come up. In other words, on choosing the trendline of results for a particular test. Possible?I saw something similar on a website but am not sure if it was relevant...
I am trying to learn how to use offsets for dynamic charts and having trouble getting the formula to pick up the correct values.
View 3 Replies View RelatedI am creating dynamic charts with a data sheet that is horitzonal. My x-axis : =OFFSET('chart data'$B$1,0,1,1,COUNT('chart data'$2:$2)-1), y-axis: =OFFSET('chart data'!$A$1,0,1,1,COUNTA('chart data'!$1:$1)-1). My formulas are giving me #VALUE. Not sure why.
(formatted general not as dates)
1980
1981
1982
1983
1984
1985
1986
1987
1988
CONSUMPTION
70
61
67
83
89
75
67
71
71
I'm running a chiropractic office. In order to see where I've been and where I'm going I keep track of things like new patient visits, patient report visits, cash in, insurance in, etc. I keep track of this on a daily basis on one worksheet. The weekly totals are paste-linked into another sheet. It is this sheet that I would like to use to create a dynamic chart however, in using the OFFSET function to create the chart, the formula counts the 'blank' cells b/c of the paste-link from the previous worksheet.
View 1 Replies View RelatedI have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
Sheet1
*EFGH5*Week 1Week 2Week 36Product 11,234,123 1,258,805 1,283,982 7Product 21,234,223 1,258,907 1,284,086 8Product 33,423,321 3,491,787 3,561,623 9Product 4342,121 348,963 355,943 10Product 52,343,424 2,390,292 2,438,098
Excel tables to the web >> Excel Jeanie HTML 4
I have created a dynamic chart, courtesy of the Jon Peltier website. I have 2 problems. No problem with getting the chart to work, the problem comes when I delete the data. I get an error message telling me that 'A formula in the worksheet contains one or more invalid references.' The other problem is that I cannot copy the worksheet to another worksheet in the same workbook. Well that is not strictly true, I can copy it but it wont updat. Any ideas as to how I can overcome this? Any suggestions welcome, apart from 'Don't delete the data then'
View 9 Replies View RelatedI have a Defined Dynamic Name which is used to select my data. How do I call that when I create a chart in excel within the data source, so that the data source always refers to this dynamic range.
I have data A B C D E
1 2 3 4 5
9 4 5 6 7
this is so the series names will be the row and for each series the rows represent the data within each of the columns. I have a dynamic range that always selects the whole range called chartdata. How do I put that in the data source when it asks me in Excel 2007 as there is no wizard for seprate x and y ranges in this version.
building dynamic charts and filters, so What I'm hoping to accomplish to build a bar chart that looks like the following:
________________________________________________
Filter: State | Filter: Region | Filter: Segment |
Revenues |||||||||||||||| + (% of Total Rev)
COGS ||||||||||| + (% of Total COGS)
Margin |||| + (% of Total Margin)
-------------------------------------------------------
My data is built in the following format on a different tab than the proposed chart:
State: | Region: | Segment: | Account: | Amount: |
MN | Midwest | Major | Revenues | $$$
MN | Midwest | Major | COGS | $$$
MN | Midwest | Major | Margin | $$$
MN | Midwest | Major | % of Total Revenues | %%%
MN | Midwest | Major | % of Total COGS | %%%
MN | Midwest | Major | % of Total Margin | %%%
[Code] ........
It seems like it'll be easy to use a pivotchart, but at the same time, there's a lot of formatting to do, which makes it tricky, especially if I have many states to deal with and the multiple combinations.
There is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
I am using defined names to build a chart. This is working fine, but I also would like to use a defined name to control the +/- fields for the error bars. The defined names I have set up are correct, and I am able to enter them into the sorce data form but Excel does not display them.
View 9 Replies View RelatedI have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
I don't mind paying for the add-on/add-in, I need to have a chart displayed of 100 rows and 1000 cells of data.
View 6 Replies View RelatedI'm trying to dynamically populate ranges to facilitate dynamic charts being generated.
I use excel 2010 at work, and 2011 for mac at home.
Dynamic chart ranges populated from named ranges as selected in nested indirectly sourced validation lists
I want any selection made in a dependent validation list which contains a list of named ranges to trigger a worksheet_change event which copies the range the selection points to and pastes it into a dynamic range in another column, beginning as a specified cell.I've tried using this, put together from some code examples from similar, but different issues.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Me.Range("B2")) Is Nothing Then
Range(Range("B2").Value).Copy
Range("P2").Paste
End If
End Sub
Trouble is, I don't really understand this code. It doesn't appear to do anything when I make a worksheet change in "B2", but I don't know exactly what it is. I suspect that perhaps the fact that "B2" is validated from an indirect source might be difficult?
I'm trying to create multiple Charts with VBA, each chart on a seperate Sheet. The link below works but i need to change it some and i'm stuck. What i'm trying to do is create a new sheet for each new graph, but I need it to create a graph for the 250 associates in column B then plot 52 weeks of their % from the Row their name shows up in. First name is in (B3), his % data is in range (N3:BO3). I have the weeks numbered out 1-52 in (N2:BO2) and i'd like their name to appear in the Tab and on top of the graph. I applied the VBA code from the link below to my sheet and changed what i knew i needed to change, but it debugs. I use to do each graph manually when i had 25 associates but i would like to use this for the whole building now.
[URL]
how to create dashboards or charts. I am looking for similar website like http://www.datapigtechnologies.com/. this is very good website for those of you who need to do some fancy staff with excel.
View 2 Replies View RelatedBasically I want to have a macro to loop through and make all the pie charts for each location but only for the top 10 of each location.
I also want the legend to be more precise for example, for London the first one in the legend should show:
Column C + "-" + Column I + "-" + Column J
Which would be: London - Rol9 -13
Instead of it being: London data rol9 13
Attached is the document in question where I've made the graphs manually : Example_Pies.xlsx
Create an individual pie chart for each row of data (roughly 2000 rows in master list). Data to be charted contains 2 cells (Benefit and Salary). Once the chart is created I need to save the chart as an image (assuming it will need to go into Paint or another program?) Once the images are created and saved to a folder I can add the image link (file location) to a merge document data source. This way I will be able pull in the pie chart (now a picture) with a merge field during a mail merge.
Sample Data
Employee
Benefit
Salary
[Code]....
I normally create charts and use the same formatting for my colours i.e. Gradient fill with Shadow etc...
Now each time i create my charts i am having to keep do the formatting again and again and if i create a new spreadsheet with charts i have to do it all over again
Is there any way i can save this formatting colour so i can quickly apply to my chart series etc?
I'd like to put a spinner button on a chart that will change the x-axis date range. The data is in day/month/year format, but ideally I'd like to have the spinner button move in 1 year increments. The most recent date should always be present and changes should just impact how far back in history to go. I have basically no experience with vba coding, so please be as thorough and simple with your responses/solutions.
View 2 Replies View Relatedi am having a problem of updating my graphs in the application i devloped, my application is like this, go to sheet 1 click showuserform button and suer form contains combo and list box select the sheetname in the combo and select two values in the list and click plot.it plots the graphs acording to the selected values but my problem is it makes a newchart every time when we select a new week range it is getting stacked...it is not getting updated with the most recently plotted graph ??? i am facing this problem when i am opening my application in other computer...u can see my problem when u open my application. i am attaching my workbook and this is the code i used for making the chart
Sub MakeChart()
Dim rng1 As Range, rng2 As Range
Dim gs As String
gs = ComboBox1.Value
Application. ScreenUpdating = True
'First selected
For i = 0 To ListBox1.ListCount - 1
If ListBox1.Selected(i) Then
Set rng1 = Columns(1). Find(ListBox1.List(i))
Exit For
End If
Next
'Last selected
For i = ListBox1.ListCount - 1 To 1 Step -1..............................