I'm trying to create multiple Charts with VBA, each chart on a seperate Sheet. The link below works but i need to change it some and i'm stuck. What i'm trying to do is create a new sheet for each new graph, but I need it to create a graph for the 250 associates in column B then plot 52 weeks of their % from the Row their name shows up in. First name is in (B3), his % data is in range (N3:BO3). I have the weeks numbered out 1-52 in (N2:BO2) and i'd like their name to appear in the Tab and on top of the graph. I applied the VBA code from the link below to my sheet and changed what i knew i needed to change, but it debugs. I use to do each graph manually when i had 25 associates but i would like to use this for the whole building now.
I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.
However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").
I need to create 63 charts from data which I have in two columns. I want to create multiple charts using one macro. For the first chart I want it to use cells K2:K80 as the x values, and M2:M80 as the y values. For the next chart I want it to use cells K81:K159 as the x values and M81:159 as the y values. For the next chart I want it to use cells K160:K238 as the x values and M160:M238 as the y values. I want to continue this, creating a chart for every 78 cells of data, all the way until the 63rd chart which uses K4900:K4978 as the x values and M4900:M4978 as the y values. I have created the following macro by " recording." This macro generates the first chart that I want:
Sub Macro5() ActiveSheet.Shapes.AddChart.Select ActiveChart.ChartType = xlXYScatterSmoothNoMarkers ActiveChart.SeriesCollection.NewSeries ActiveChart.SeriesCollection(1).XValues = "=Sheet1!$K$2:$K$80" ActiveChart.SeriesCollection(1).Values = "=Sheet1!$M$2:$M$80" ActiveChart.ChartType = xlXYScatterSmoothNoMarkers ActiveWindow.SmallScroll Down:=-3 End Sub
How can I alter this macro to create all 63 charts?. It seems like there is an easy way to do this, but I don't use macros very much (at all).
The macro creates multiple charts from data in one sheet, but now when I'm trying to scale it up to multiple sheets, the previous charts created disappear. E.g Creates 5 charts for sheet 1 (can see them being created, using debugger mode), looping to the next chart and they are created but the first ones has disappeared! What am I doing wrong? I'm creating my chart by the following code:
[Code] .....
The startpoint variable is changed for every new chart within the one sheet and the outputsheet is changed when you change the sheet.
I need to make a macro that creates a specified number of graphs depending on the file's number of data sets. I know the number of sets that are in the data, and I know the number of data points that were taken. Here is what I have:
Sub Graphs() Dim Startpoint As Integer Dim Endpoint As Integer Dim count As Integer Dim xStart As String Dim xEnd As String Dim NumberSets As Integer Dim yStart As String Dim yEnd As String Dim DataSet As Integer Dim Data Startpoint = 11 'The first set always starts in row 11 Endpoint = Range("L4").Value + 10 'Thefirst set always ends after the value of L4+10 NumberSets = Range("L7").Value 'number of times I need the loop to work count = 1..........................
how to create dashboards or charts. I am looking for similar website like http://www.datapigtechnologies.com/. this is very good website for those of you who need to do some fancy staff with excel.
I need a macro to create the following worksheets and charts from an Excel data set:
Three (3) worksheets (already created manually in attached Excel file):
1. Chart Data. (a) Column A in Chart Data is always numbered 1 - 600 (50 years x 12 mos/yr). (b) Column I and column Y data sets (from Prod_Month) created in Chart Data. Each data set can be identified and collated with column F in Prod_Month (API) which is unique for each dataset.
2. Rate vs. Month - plot of Daily Gas (col. Y in Prod_Month) vs. Months (col. A in Chart Data).
3. Rate vs. Time - plot of Daily Gas (col. Y in Prod_Month) vs. Calender Time (col. B et. al. in Chart Data)
At a minimum, could someone help me create the Chart Data worksheet from the data in PROD_MONTH? Charting all the columns takes time from Chart Data but any data manipulation macro(s) help.
Create an individual pie chart for each row of data (roughly 2000 rows in master list). Data to be charted contains 2 cells (Benefit and Salary). Once the chart is created I need to save the chart as an image (assuming it will need to go into Paint or another program?) Once the images are created and saved to a folder I can add the image link (file location) to a merge document data source. This way I will be able pull in the pie chart (now a picture) with a merge field during a mail merge.
I normally create charts and use the same formatting for my colours i.e. Gradient fill with Shadow etc...
Now each time i create my charts i am having to keep do the formatting again and again and if i create a new spreadsheet with charts i have to do it all over again
Is there any way i can save this formatting colour so i can quickly apply to my chart series etc?
I'd like to put a spinner button on a chart that will change the x-axis date range. The data is in day/month/year format, but ideally I'd like to have the spinner button move in 1 year increments. The most recent date should always be present and changes should just impact how far back in history to go. I have basically no experience with vba coding, so please be as thorough and simple with your responses/solutions.
i want to create dynamic Excel Charts in one sheet ,The sheeet contain dynamic columns and rows and i want to create for each 4 columns a chart in a new sheet ,i started to try it in VBA and didnt founs the way to select 4 columns as a range, i succeseed to do it with msgboox that the user enter the range but i want to do it in a loop
i am having a problem of updating my graphs in the application i devloped, my application is like this, go to sheet 1 click showuserform button and suer form contains combo and list box select the sheetname in the combo and select two values in the list and click plot.it plots the graphs acording to the selected values but my problem is it makes a newchart every time when we select a new week range it is getting stacked...it is not getting updated with the most recently plotted graph ??? i am facing this problem when i am opening my application in other computer...u can see my problem when u open my application. i am attaching my workbook and this is the code i used for making the chart
Sub MakeChart() Dim rng1 As Range, rng2 As Range Dim gs As String gs = ComboBox1.Value Application. ScreenUpdating = True 'First selected For i = 0 To ListBox1.ListCount - 1 If ListBox1.Selected(i) Then Set rng1 = Columns(1). Find(ListBox1.List(i)) Exit For End If Next 'Last selected For i = ListBox1.ListCount - 1 To 1 Step -1..............................
I have a quite big database as a result of a study in Excel 2010. There is a special block of data for every participant in the study, including 16 data series in 16 lines. I have to make a unique chart for every line.
One block is bulid up in a way, that every row is the input for a chart, with the exception of one "spacer" row, which is empty.
Name 1 2 3 4 ... A B C
D E F
For example in the sample above, there should be 6 line-charts (A, B, C, D, E, F) next to the block.
Can a macro be written, so I can automatically create the chart-set by selecting the block's upper left cell and running the macro? Or is there any easier method?
I am trying to write a macro that goes in an excel file that creates a powerpoint presentation, and puts four (4) charts in each slide.. I currently have a code that is pasting all of the charts in the same slide and I can't figure out why it isn't working (side note: I haven't attempted to resize or relocate the pictures on the powerpoint slides yet)..
Code:
'Add a reference to the Microsoft PowerPoint Library by: '1. Go to Tools in the VBA menu '2. Click on Reference '3. Scroll down to Microsoft PowerPoint X.0 Object Library, check the box, and press Okay
'keep button in same location Set btn = ActiveSheet.Shapes("CommandButton17") With btn btLeft = .Left btTop = .Top End With
I have an excel sheet populated with loads of values. There is a space between each set of data. I need to draw a graph for each section and i cant work out how to do it. I have attached the sheet in question. The gap between each column has "space" written on row, which is needed to prevent it being deleted. The drawing of the graphs needs to be automated as there is going to be 100's of sheets containg lots of data. The column size of each section can change so it needs to be dynamic. I have attached an example sheet
I am trying to create a Macro to pull from a list and then update the charts and print. I have a list that has over 100 clients. I believe I need to loop but I am not familiar with VBAs at all. Below is what I am trying to accomplish.
I created a pivot chart and am utulising the report filter. Is there a way to display multiple charts on the same worksheet (or even another worksheet) for the purpose of comparison?
am trying to create multiple pie charts now but I'm having problems my errors are highlighted in red. What I'm trying to achieve is to create a pie chart for the first table then another for the next table and so on but its not working out.
I have 23 Charts on a sheet which I place into a MS Word Doc. ATM all charts have borders, which is what one of my Managers like, however another Manger likes these charts without borders. I tried to record a macro so I could have this done by VBA (excel 2007) but it did not record the formatting. write a code to remove a border and and then add a border back in specifying colour, border styles (width etc). Say just for Chart 38, I can the just repeat this. But here are all the chart numbers in case you need them: 38,20,27,5,11,21,13,6,9,19,10,7,28,29,30,31,32,12,33,34,37,35 & 36.
I have a workbook with a chart on a worksheet called Area Report
There are 10 areas in total A - J, to view a particular area cell I2 is validated to only accept entries A - J which represent the Areas, selecting a particular area updates the chart for that area
Is it possible to have a macro that will print all 10 Area Reports, I tried to do it using the Record Macro function, the code was as follows .......
I am working on a huge amount of data and want to analyse that data through charts because charts are quick representation of the data and save a lot of time. I got some code from my friend, to read each row in a worksheet and plotted the corresponding chart on the new worksheet each time i.e., each row has one chart which is plotted on new worksheet each time.
But I don't want it to plot the chart on the new worksheet. I want it to plot the chart on the same worksheet. In my case there are always more than 30 rows, so it should draw 30 charts on the same worksheet in which 30 rows are written.
Here is the code which plots charts on the multiple sheets
Code: Sub LineCharts() Dim Ws As Worksheet Dim NewWs As Worksheet Dim cht As Chart Dim LastRow As Long Dim CurrRow As Long
Set Ws = ThisWorkbook.Worksheets("Sheet3") LastRow = Ws.Range("A65536").End(xlUp).Row
I would like to generate a macro which can work on by importing an excel tabulated datas and plot it into several graphs in one click and added with a filter function would be best.
I have two separate data tables (with separate named ranges) and two separate pivot tables (the pivots each refer to the separate tables) all on the same sheet. For each of the pivot tables, I would like to have a separate pivot chart. In the pivot charts, when I click "Select Data", I find that the "Chart Data Range" for the pivot chart is grey (uneditable). Is there some setting that I need to toggle to enable the data source range so that I can change it? Also, when I try adding a new pivot chart to the sheet, this option is also grey/unavailable.
I have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
I'm using Excel 2007 and my objective is to setup a trading log that tracks my performance with charts that dynamically update to applied custom date range filters. The link below shows screenshots of what I'm trying to emulate with Excel 2007.
[url]
I have all my trading data laid out in a tabular format simlar to what is shown in the top screenshot. My tabular layout differs in that it includes 4 additional columns. My chronological data layout I'm using seems to be troublesome for conventional Excel charting methods.
When I apply custom filters for open dates and close dates, my Excel charts do not dynamically react. What I have determined is that I need to bypass the conventional charting methods used in Excel and focus instead on using Charts that rely on a VBA script or a formula. My objective is to have multiple charts (like the ones shown in the screenshots link above) all using the same data nested in my tabular trading log.
Can anyone out there help me out with setting up Charts that are more robust? I would appreciate example VBA scripts and / or links that will show me how to setup charts that dynamically react to custom Excel Filters, and can group together matching data sets in a column and show such data sets as a single slice in a pie chart. Currently, I'm getting multiple pie slices for the same data set. I need a formula or a VBA script that will clump together all of the data that belongs in the same group and show it as a single slice in a pie chart.
I have a chart that I want to be the same across multiple worksheets. The data ranges don't move, but the data may be different. It is cumbersome to go and retype the name of the sheet every time this chart is placed.
I have tried using named ranges. My named range X is !$A$1:$A$30 so that it will refer to the active sheet. If I place this in cells on the spreadsheet, it works. If I place "=X" in the values entry for the source data of the chart, I get a formula error.
I would like to use multiple scatter plots and bar charts in one chart. Problem is that X-Axis goes horribly wrong every time, even if I have same points on both scatter and bar. Here is Data for 2 Scatter Plots
I start with Scatterplot and put those in the graph, then I add other data and change it to Bar Chart, but this is the point where X-Axis gets mixed up and scatter plot X data and Bar chart X data are not matching.
building dynamic charts and filters, so What I'm hoping to accomplish to build a bar chart that looks like the following: ________________________________________________ Filter: State | Filter: Region | Filter: Segment |
Revenues |||||||||||||||| + (% of Total Rev) COGS ||||||||||| + (% of Total COGS) Margin |||| + (% of Total Margin) -------------------------------------------------------
My data is built in the following format on a different tab than the proposed chart:
State: | Region: | Segment: | Account: | Amount: | MN | Midwest | Major | Revenues | $$$ MN | Midwest | Major | COGS | $$$ MN | Midwest | Major | Margin | $$$ MN | Midwest | Major | % of Total Revenues | %%% MN | Midwest | Major | % of Total COGS | %%% MN | Midwest | Major | % of Total Margin | %%%
[Code] ........
It seems like it'll be easy to use a pivotchart, but at the same time, there's a lot of formatting to do, which makes it tricky, especially if I have many states to deal with and the multiple combinations.
