I'm trying to apply a VLOOKUP function to my schedule sheet. Attached to this post is a copy of the sheet.
The shifts that I'm entering in B7:AC7 should be looked up in the table located at K21:Q25. I'd like the looked up value to display in B8:AC8.
I currently use the PROPER function for one column at a time. How can I apply it to a whole worksheet, preferably without creating new columns?
View 9 Replies View RelatedI have a vlookup formula which can refer to any one of several sheets labelled by month.
I need to be able to show in a different cell which sheet (month) the formula refers to.
In other words - displaying part of a formula in a different cell.
I am attempting to create a capital depreciation schedule that gives us our total operating impact for a given calendar year. I can populate my depreciation based on the purchase month, and fill across the schedule the monthly depreciation cost, however, I'm not sure how to stop the depreciation after the item has depreciated fully (say after 36 months).
For example, if someone were to select March 2013 in B5, monthly depreciation should begin in E5 and spread across ONLY 36 months. If they were to select April 2013, the depreciation would begin in F5 and extend ONLY 36 months.
I think it might be possible to do this with an COUNTIF function, but it is not working for me.
Have a look at the attachment : Book1.xlsx
What I want to do is to apply vlookup in cell E2 and whenever we apply vlookup taking lookup value 'A2' the value in the adjacent cells B2, C2 and D2 should show up in the "Ans' column cell "E2".
I would like to copy values corresponding to a unique identifier from one sheet to another, using the vlookup function. The problem is that after a certain cell the values are given as N/A even though they are present in the sheet I want to copy them from.
View 3 Replies View RelatedI need to do is calculate the hours between two clock times minus 30 minutes.
Example:
Cell A1 - 4:00am
Cell B1 - 16:30
I need Cell C1 to say 12 (hours)
Also:
Cell A2 - 17:30
Cell B2 - 02:00am
I need cell c2 to say 8 (hours)
I am currently trying to take a list of people who have log in times at work however if they log out then back in the result is what you see below.
What I am looking to do is match the find the name then find the earliest time (login Column C) and then the last or latest time (log out Column D)
A B C D
John Smith64676076:02 AM6:13 AM
John Smith64676077:25 AM11:27 AM
John Smith64676212:08 PM4:01 PM
John Smith64676076:13 AM7:25 AM
Would like a formula as I have another Tab on the sheet that looks up name and compares against a schedule to see if the person was late or left early.
I have a statement in a cell in which there is a date field.
Is it possible to apply Vlookup on the statement and change the Date value keeping the statement same ???????
I have three columns. the first column is a list of buyers (19), then second column is a list of suppliers (27) and the three column is the time. each supplier has ranked the buyers and the order they want to meet them.
every meeting is for 20 minutes e.g 1st meeting at 8am then next at 820am.
i can do all of it manually but the schedule becomes too long.
is there a way to make the schedule in a way that it is easily readable by anyone and if I need to add anything, it should not be an issue.
How I can apply an IF function for four or more columns. for example: if the value is the same in four or more cells, IF function can type OK, if not something else.
what I am doing is this : =IF(H2=I2=J2=K2=L2,"OK","Not Equal") but I always receive the value"not equal" even when the all cells have the same value. The cells values are found using formula so I did copy and paste value but I received the same result.
Essentially I'm in charge of managing schedule for 5 students, I would like to get them to meet during their free time (free for all 5 of them)
1. Schedule has to run from 8 am to 9 pm.
2. I have all 5 individual schedules.
I want to combine all 5 into one so everyone can see their free/occupied times, it would be extra useful if I can modify individual schedules (One student's work schedule changes bi weekly).
It has to be able to show who is occupied at which time and free time for all of them. (color coding each of them would be amazing also, granted I can show multiple clashes with gradient or something similar)
I understand it involved creating individual spreadsheets and a master sheet but how to go on about it.
I do PPC work and you can export query data from Adwords with Column A being the actual search query. Then column B - E are impressions, clicks, cost & conversions (from each query). In this example, cell A1 might be running shoes, cell A2 might be walking shoes, cell A3 is running pants, and cell A4 is baseball pants. I want to add a new column (F) that does product category groupings based on partial text matches in column A. For example, anything that includes the text string shoe or shoes should be labeled as shoes in column F. Similarly, all queries that contain the characters pant would be listed as product category pants in column F.
Currently I do this manually by conditional formatting on column A for contains text and then color the cells. Then I sort by cell colors. Then I manually type in the product category into F for each color block in A. Needless to say, this is slow and manual.
What I would prefer is to have a master table (like a vlookup) on sheet 2 where column A is the list of partial text matches and column B is the product category to be returned if that the partial text in sheet 2 column A is found in the query list on sheet 1 column A. This way, on sheet 2 I could have cell A1 sneaker, cell A2 shoe, cell B1 shoes, cell B2 shoes, etc to manage the correlation between text strings and product category groupings.
Basically I want a formula to put in the cells on sheet 1 in column F that searches all of column A on sheet 1, looking for partial text matches from column A on sheet 2 and returning corresponding product category in column B on sheet 2.
I have sheet containing a schedule of data. It is a record of changes on a project, each change is sequentially numbered and contains a row of data (date of change, whether approved, cost of change etc). Each change is given a cost centre reference (1 of 10 cost centres are being used) depending on the type of change being made.
I need to keep that record of the overall schedule of changes but I also want to extract each of the cost centre categories into a sub table on the sheet to give a schedule of changes against each category.
I have almost achieved what I want but one method leaves blanks in the sub table which I want to avoid and the other method I used to remove the blank lines but needs the first method sheet calculated before it then goes to work and seems rather cumbersome and I suspect there is a much easier method. (I also want it to be compatible with excel 2003 so it can be used across several platforms.)
i used excel as a calculator but when i needed to make some effort to reach a solution for my problem it let me down, so i will write my problem
i have a record in my data base and i want excel to look if the record is in another range and apply some maths. so i wrote this formula
i want to apply a macro for all sheets that start with "MCC ENTRY" and "MCC EXIT"
i.e. MCC ENTRY 1, MCC ENTRY 2, MCC ENTRY 3, etc. & MCC EXIT 1, MCC EXIT 2, MCC EXIT 3, ETC.
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
I am creating a series of macros for a workbook, and at the beginning of each macro I unprotect all sheets and at the end of each macro I protect the sheets once more. The issue I am having is that even with these macros in place, I continue to receive an Excel alert message saying:
"The cell or chart that you are trying to change is protected and therefore read-only. To modify a protected cell or chart, first remove protection using the Unprotect Sheet command (Review tab, Changes group). You may be prompted for a password."
The macro will then run. Everything works as it should, but I do not want this error message to pop up. I have tried inserting
Application.DisplayAlerts = False
into the code, but it does not stop the message.
apply a count to a sheet which adjusts when filtered. I have attached a sheet, but as you can see the filter is returning the incorrect count as it is including the rows which are not displyed
View 2 Replies View RelatedI'm currently applying these formulae manually, and also instructing other people to do the same, due to my lack of understanding of macros. Hopefully someone can give me some instruction as to how to do this automatically. I'd like people to be able to open sheets sent as normal CSV's and apply a macro to get them into the right format, changing only rows with data in them.
These are the instructions I'm currently sending:
In cell n1 enter:
full phone number
in cell m2 enter:
=RIGHT("00000000" & J2,8)
Drag m2 to last record
In cell n2 enter:
=CONCATENATE(61,I2,M2)
Drag n2 to last record
In cell o1 enter:
Date of call
in cell o2 enter:
=DATE(MID(C2,7,4),LEFT(C2,2),MID(C2,4,2))
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I am trying to use the vlookup function together with an offset function but i am not getting it to work properly.
The situation is as follows:
I have a column E in which i use the vlookup function to find its corresponding value in B which in turn refers to a named range. However, the figure i want the function to return is 2 columns to the right and 2 rows above the value which the vlookup funtion finds in the first column.
I have though of using the offset function, but i cannot figure out how to make this work.
Using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup.
Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03.
I'm using the below code :
[Code] ....
Attached File : VlookMid.xls
using the Mid function in Vlookup. I want to get the mid of the value which i get using vlookup. Example: if my Vlookup gives the value as "GSC 03-Parts & Service Systems-GSMS-Test " i want to use the mid function to get the a new value as 03. I'm using the below
View 3 Replies View Relatedvlookup function. find whats wrong with my code
View 3 Replies View RelatedIF(ISNA(VLOOKUP(E24;Sheet1!$A$6:$N$25000;10;FALSE))=0;"NOT FOUND";"FOUND")
This Formula doesnt seem to work, it shows me either every row with found or not found..
If there is a match to E24 in other sheet and has a value in column 10 it should say found otherwise not found.
How do I use excel to refer one cell as a constant value while the second cell varries as the cell value changes along multiple sheets.
View 7 Replies View RelatedI have 2 excel sheets A and B
Sheet A has full list of (3000) of user names - First Name , Last Name and Email address
Sheet B has few UPDATED users (200) of user names from above list with UPDATED email addresses ( with First name , Last name and email address)
How should I update Sheet A with updates from Sheet B?
I have date on Sheet 1 and Sheet 2
what I want to do is take column A from Sheet 1 and compare to Sheet 2 column A if it's one Sheet 2 then on Sheet 1 column C and D post the results...
ie
Sheet 1
A B C D
ADDYY 64
Sheet 2
ADDYY4644454654
so then Sheet 1 would look like this
A B C D
ADDYY 64 ADDYY4644454654
Macro Button to copy and paste from different sheets, I need to Copy SKU which is in Sheet 1 Column B and Find in Sheet 2 then Copy the UPC on Sheet 2 and Paste to Corresponding SKU in Sheet 1 Under Column C. If an SKU doesnt show on Sheet 2, it should leave Sheet 1 Column C blank and go on with others.
View 3 Replies View Related