apply a count to a sheet which adjusts when filtered. I have attached a sheet, but as you can see the filter is returning the incorrect count as it is including the rows which are not displyed
View 2 RepliesThe following code filters my sheet to show only values less than 0 in column T, (column 20).
View 5 Replies View RelatedI have a vertical list of data which is sorted in to "Regions" 1 to 7 there could be up to 25 instances of each Region, but I have no way of knowing.
I want to be able to select each Region and place it in it's own column.
I'm Working on the next part of my long term project.
I need to count the number of Cells Selected in MacroTest2.xls column BG.
( Selection.count) ?
I need to Open Workbook MacroTest3.csv. It has a Header and only Row 2 filled with data.
(Windows("MacroTest3.csv").Activate)
I need to Pulldown/Copy row 2 a number of times so that the Number of Duplicate Rows Created is Equal to the number of Selected Cells in the Count in MacroTest2.xls.
I have been able to do it based on a Static Number of Selected Cells (3) ( the existing Row + 2 ) by recording the manual event with this code.
Rows("2:2").Select
Selection.AutoFill Destination:=Rows("2:4"), Type:=xlFillCopy
Rows("2:4").Select
I'm trying to understand how to declare the variable and apply it, so that the Number of Rows of Template Data in MacroTest3.csv is Equal to the Number of Selected Cells in MacroTest2.xls column BG.
This is part of a Macro that will then transfer some same selected Range of Cell Data as well. It is Currently working but not with a variable number of selected cells. I can post the whole code if it would help you to see the whole picture.
I count D5:D54 filter data but i want count only when value is greater then 0(zero)
[Code]....
I Mean:
d5 = 0 don't count
d6 = 0 don't count
d7 = 0 don't count
if d5:d54 has value greater then 0 then count...
Countif can be used to count the no. of occurrence of a certain value within a range. However, if the range is being filtered, can the no. of occurrence be counted?
View 3 Replies View RelatedIs there a function to count blanks in a filtered column? That is, if I filter a column to show the rows that are blank, can I use the subtotal function (or some other) to count the number of blanks?
View 14 Replies View RelatedTo count the genuine number of rows in a worksheet, I use...
count = Cells.Find(What:="*", SearchDirection:=xlPrevious,SearchOrder:=xlByRows).Row
When I add an auto-filter, the above still works fine.
When the auto-filter doesn't reduce the no. rows, the above returns a value of 1.
I've tried using...
count = Rows.SpecialCells(xlCellTypeVisible).Count
... with a result of 1 if no rows are filtered
So, what is the best way to count the populated number of rows on a worksheet where there is an auto-filter that may, or may not, reduce the number of rows ?
How do I count values in filtered cells?
After I filter for values in Columns(C), I want to count values in Columns(D). When I filter data, I noticed I can manually select the filtered cell range (i.e. Columns(D)) and at the bottom in the Status Bar it will give the correct count. If I cursor over that status bar count it will display "Number of selected cells that contain data." However, I cannot seem to figure out how to get vba to select just the filtered cells selected in that range and count them only and correctly... it instead counts all the values to the last cell in the filtered range.
For example
1) let's say I have a Range("D1:D120') and there are 20 cells containing data in that range.
2) I filter Columns(C) resulting in 10 rows and the rows are 2, 3, 20, 22, 27, 30, 37, 41, 56, 60. Of those 10 rows, there are only 2 cells containing data (let's say cell D20 and cell D37).
3) Now in reality, cells in Range("D2:D60") actually contain 10 cells with values, but since we filtered on columns(C) values... Columns(D) only shows 2 values.
...... here is my problem:
4) If I manually select the filtered range, the status bar "Count" value will correctly sum as "2." But if I code VBA or even "Record a macro code" (obviously incorreclty on my part), it will return a value of 10 for the range of D2:D60 and not on the visible filtered value which is "2."
In an excel sheet A1 to ...... colum i have some cirteria. If I filter a criteria i should get the count for it. Kinldy let me know with out using VB how is it possible.
How do I know how many rows are selected by rngToFilter? I need to add in a conditional statement if its 0.
For Each rngCell In rngUnique
sheetName = rngCell.Value
ThisWorkbook.Worksheets(sheetName).Delete
rngToFilter. AutoFilter Field:=4, Criteria1:=rngCell.Value
rngToFilter.AutoFilter Field:=28, Criteria1:="="
Set rngFiltered = rngToFilter.SpecialCells(xlCellTypeVisible)
Worksheets.Add
rngFiltered.Copy ActiveSheet. Range("A1")
I am using Excel to tabulate votes for a contest. Judges have given a number to each entry, and but certain judges' opinions need to count twice as much as other judges' opinions based on their qualifications.
I've attached the file to help illustrate what I'm trying to do. Morris's votes need to count twice for all Photography or Web Design entries, and Clark's votes need to count twice for all Graphic Design or Web Design entries.
I know I can do this manually by simply copying the number into a blank cell in another column (like the blank column between Morris and Clark's names), but is there any way to make Excel do this for me?
Working on a simple worksheet_change issue for someone, the thought came, "after this code runs" it would be good if the TargetRange changed to no longer include the rows it had run on already. This way, if you later accidentally deleted/edited a cell that already had data, it wouldn't cause the macro to run again and do the paste job again?
Anyway, here is the code original
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies View RelatedIs it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
[Code]...
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory???
ERROR#9 OUT:
right I have 5 columns
A
employee id
B
Date exposure
C
Total Exposure
D
First Name
E
Last Name
I want to be able to filter by employee id I'm using this formula below
=SUMPRODUCT(('Excel Exposure Grapth'!B$2:B$4000<>"")*(MONTH('Excel Exposure Grapth'!B$2:B$4000)=1)*('Excel Exposure Grapth'!C$2:C$4000))
but problem I'm getting it count all dates even after the data is filtered
For Example
if I had 2 employee's
EmployeeID 1 had 6 dates in January
EmployeeID 2 had 10 dates in January
if I was to filter to only show EmployeeId 1 it will only show 6 dates but the formula above counts everything even if filter applied
From a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?
Is it possible to count the unique entries in a range based on the results of a filter that has been applied? I basically have a column with 2000+ cells that contain some matching values and I only want to count the unique entries. This will need to be a dynamic count as well as the filter criteria can and will change all the time.
View 14 Replies View RelatedAs the subjects states I need to count the unique entries in a filtered range.
View 7 Replies View RelatedI need to count the number of unique names from a column of filtered text. On the attached example D5 is where I need the value, the current array I have does not work when the filter is applied by changing the product in drop box. I need to have a count of the unique account names from column A.
View 3 Replies View RelatedIs it possible that, once filtered, you can count the amount a filled in cells in a column range...BUT! These cells are ID numbers for stocks, so CAN contain duplicates which represent accounts, Therefore, any duplicate will be counted as 1...
eg
12345325
12345325
435ghfdhy
5464OKff
SEDDONF4
4455ONHIG
4455ONHIG
4455ONHIG
4455ONHIG
4455ONHIG
234234
66555556
66555556
66555556
As we can see here there are 14 lines of data but only 7 make up the dataset
so if X was the variable assigned to this it would = 7
Is this possible, in a loop or some sort, Would VBA hold all the Instances in its memory?
I have some checkboxes that filter rows and a text box that should display the number of filtered rows:
If checkbox1 Then
Range("F2").AutoFilter Field:=6, Criteria:="<>0", Operator:=And
TextBox1.Text = "No of Records: " & Selection.SpecialCells(xlCellTypeVisible).Count
The text box is showing 1669380 record when there is only about 250.
The table on Sheet 1 is being used a record system for history of each lifting equipment we mobilized to our client for rental. The Door No. (Column A) is a name for each equipment. The Date Mobilized is the date when equipment left our premises and started working on site and Date Demobilized is the date when equipment went back to our yard.
To explain my requirement, refer to the first 7 rows indicates that the Door No. ATC0005. It was mobilized 7 times but demobilized 6 times. Meaning that the equipment is currently deployed because the last mobilization dated 01-Jul-13 doesnt have an corresponding data of Demobilization. My first requirement is to have a filter where in it will show the list of currently mobilized equipment. In that case I just go to Date Demobilized and filter it by only showing the blanks.
My second requirement is to know how to filter to only show the available equipment. I was able to analyze it this way: For example we take a look at the history of FLD0001, it has 5 Mobilization Date and 5 Demobilization Date. So i need to know a function to filter a Door No. that has the same number of Mobilization Date and Demobilization Date. My first solution is to just filter the Date Demobilized to not show blanks hence it will show all equipment that has the same number of Date Mob. and Date Demob. But my exact requirement is to have a real time report on a separate sheet (refer to Sheet 2).
Sheet 2 is report for equipment status. Under Equipment (Column A) are the list of equipment. Using the data available on Sheet 1, the cells under Client (Column B) should be filled up either "Available" or "Deployed".
Lastly, for all Deployed equipment only the Client Name should also be retrieved on the report on Sheet 2.
filter values.xlsx
On sheet 1, I have dates in column A, then numbers under LabA through C. On sheet 2, I would like the contents of columns B, C, D to autofill when entered. However, I would like to display only the last entry. For example, Lab A (column B) is currently showing "7" in cell B6, if I enter a number in B7, I would like for sheet 2 to autoupdate cell B3 and display that new entry instead of the "7".
View 1 Replies View RelatedThis used to (and on some machines still does) work very well, but all of the sudden on my work machine, it is incredably SLOW!! The whole program takes a list of tasks and dates, and creates a wall calendar from them. Then (the offending part, below in code) looks at each cell on the wall calendar and formats it by sizing the height of a merged cell so that the entire task is displayed, then goes on to put a square around it (works fine).
The formating of the cell height/width can take up to 11 SECONDS each cell. What is happening to do this? Again, it USED to, and on some machines still does, FLY through this process. But now it just crawls. Code below, with the 3 offending lines identified.
Private Sub Fit_Height(ByVal Target As Range)
Dim NewRwHt As Single
Dim cWdth As Single, MrgeWdth As Single
Dim c As Range, cc As Range
Dim ma As Range
Application. ScreenUpdating = False
With Target
If .MergeCells And .WrapText Then
Set c = Target.Cells(1, 1)
cWdth = c.ColumnWidth
Set ma = c.MergeArea
For Each cc In ma.Cells
MrgeWdth = MrgeWdth + cc.ColumnWidth
Next
An additional item (clue?) is that, after the macro is done running, it is still unbearably slow to do anything on-screen. Grabbing the column header and changing the column width takes 5 seconds or so before it snaps to the desired width and displays correctly. Closing Excel and reopening it takes care of that problem.
More advancement (as I wait). It seems to be the Application.PageSetup that kills it. As soon as I hit the first Application.PageSetup line, the app grinds to a halt, and almost every line after that that manipulates the screen format or the page format takes 5 or so seconds EACH to process. I put them all at the end, but that really doesn't solve the problem, nor explain it, nor give me a true solution.
=SUBTOTAL(2,A2:A100) can be used in combination with any other formula so that when the data is filtered using autofilter it will only count values greater than zero.
I have attached a worksheet with the example.
In the attached workbook subtotal formulas are used in Row1 for sum and row 2 for count.
When the data is filtered using code "DUP" in column D, the subtotal in cell C2 is "4", whereas in the specified range there is a positive value in only 1 cell that is $1050 in cell C99.
Is there some combination that can be used with SUBTOTAL formula so that it will only count values greater than zero when data is filtered.
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
I have a filtered list and want to count the number of times each value appears in the filtered list. I also have other hidden rows that I do not want to include in the count and the filtered rows should not be included in the count either. I have tried countif, pivot tables and subtotal .
View 9 Replies View RelatedI'm trying to come up with a histogram chart that adjusts Bin Size based on user input. I've come up with the formulas for Bins and Frequency, but am struggling when it comes to charting the data to dynamically update when the user changes Bin Size. How to make the x-axis dynamically adjust with the number of Bins.
View 5 Replies View Relatedi want to apply a macro for all sheets that start with "MCC ENTRY" and "MCC EXIT"
i.e. MCC ENTRY 1, MCC ENTRY 2, MCC ENTRY 3, etc. & MCC EXIT 1, MCC EXIT 2, MCC EXIT 3, ETC.