I have a 12 month budget spreedsheet. Some expenses' are fixed every month. I would like those cells to be automatically filled with that fixed amount. Say on the 5th of every month a particular cell would have $50 automatically entered so i don't have to do it manually.
View 2 RepliesI have a workseeht that consist of 13 tabs. This is what i am trying to do:
Each tab is for a month in 2007. The main tab is formated to show a recap of each month. So when the Janruary tab has been completed the main recap page should pull data from its tab. Then once the february tab has been completed the main recap tab should now show the data from this tab, and so on and so on.
I am currently updating the data manually by refrencing the new tab in the main tab formulas. I hope there is an easier way for me to get this data without manually inputing formulas every month.
I have a daily nutrition log that is made up of monthly sheets. New entries are placed below the last entry, into the proper sheet by date, automatically.
The problem I am having is to find a way to put my formulas and formats into row 1 of each new monthly sheet so that when the entry is for the next month, it will add the new entry into row 2 of the new month, seemlessly, without manual intervention.
The formula I am using works from row 2 and down. It doesn't work on row 1.
Here is one of formula's that works on row 2:
=If(Or($A2=$A1,$A2=""),"", SUMIF($A:$A,$A2,H:H))
When I copy/paste it into row1 (to get the starting reference row), I get this:
=If(Or($A1=#REF!,$A1=""),"",SUMIF($A:$A,$A1,H:H))
The code copies the last row (in the case of a new sheet that would be row 1) and pastes' it into the next row down and then overwrites the first five cells. The problem formulas are NOT in the first five cells.
I tried to using $A65536, but it also #REF! error's out.
In the attached file I'd like to have a formula on cell B3 that would pick the number from the latest entry on "Actual" columns (column K, column M....). This should update the cell each month data is entered in respective month column.
View 4 Replies View RelatedI have a workbook with several sheets, each of which represents a client. At the bottom of this sheet, I have a call log to record the times that we attempted communication, left a message, etc. Since it's tedious enough as it is, I'd like to save my team 2 seconds and a slight bit of that tedium by having the date an attempt was made automatically recorded in the row where the attempt is entered.
Let's say this all takes place in A47:D47. For example, if I called the client on 7/15/08 and left a message, I would record who was called in B47, the name of the caller (me) in C47, and the result in D47. If possible, I would like to have the date of the attempt (today's date on the given day) entered in A47 upon the entry of information in B47:D47.
I am attempting to create a formula which will detect of a cell is empty, and if it is empty enter the date by using TODAY(). I also dont want this date to change when opened after it has been entered. This is what I have been working with so far.
Code:
=IF(A1="",TODAY(),"")
Code:
=IF(G9>=TODAY(),A1=1,"")
I am trying to use the second formula to change the value in the cell "A1", but instead it just returns a true/false statement in the cell with this formula.
How can I get an automatic time & date entry into cell B1 based on a alphanumeric entry in cell A1. The time and date must not re-calculate every time the workbook is opened.
View 4 Replies View Relatedknow if there is any way of getting a cell produce an X (for example) when it is selected and blank when selected again? Basically a tick the bok response. I know i could use a drop down list but i was hoping for a quicker method as a lot of ticks accross a lot of cells are required.
James
So the title isn't really totally descriptive but it was all I could come up with. I have a work book that has 30 identical sets of 5 cells for users to enter in information. Some of my users will not need all 30 sets. I'm wondering if there is a way for the user to enter the number of cells they need and have excel then format so they have the desired number, instead of 30. Then have excel change all the instances of this number in formulas so that it matches the new number of cells. I hope I explained this well enough for someone to help.
View 9 Replies View RelatedI've been updating all the charts manually each time I update the entries in the worksheet which charts are created from in the same workbook. Is there any way (eg. by use of macros or VBA) that I can have all the charts updated automatically when data ranges are updated each time?
View 2 Replies View RelatedI have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
[CODE]Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = TextBox1.Text
Cells(eRow, 2) = TextBox2.Text
Cells(eRow, 3) = TextBox6.Text
End Sub[CODE]
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
Would 'Training.xls' need to be open?
I want to create a monthly timesheet which contains 9 columns for
(Date, Day, Project no., Activity, Time In, Time Out, Total Hours, OT Hours, Remarks)
I have used IF Function to calculate Total Hours & OT hours automatically. Time IN & Time OUT, Project No., will be entered manually on daily basis.
Weekday function is used in the Day column to return the corresponding day of the date in the Date column.
Name of the Month and Year will be manually entered in the designated cells I3 and I4 respectively.
Now the solution I am looking for is, the dates should be automatically entered in the Date column (in cells A8 to A38) based on the Month & Year entered in cells I3 & I4. Dates of the corresponding month of the year should only be filled in. (If a month is not having 29, 30 or 31st day, the corresponding cells should be left blank. i.e. nothing should be displayed in the corresponding cells). I am looking for some sort of formula to enter in the cells of Date column (A8 to A38) achieve this. I have searched the forum and could not find anything which could at least give me an idea about the kind of function or formula to be used.
Attached here is the time sheet I am trying to create.
I have a table of yearly totals for the amount spent by x. I also have a growth rate for each month so for example in 2001 in jan the growth rate might have been 0.3% and feb 0.5% What I want to do is for each month based on the growth rate and the total produce a value for each month which sum to the total amount. It's also important to note that it restarts each year.
Link for excel file is here: [URL] ...........
I’m currently pulling data into two columns labeled “Monthly” & “Non-Monthly” respectively. They indicate work orders with a frequency of “Monthly” or “Non-Monthly”
The Monthly data is obtained using the following formula:....
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedI used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies View RelatedI am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
i have an address that is all in one cell displayed like
101 hampton Court, Hampton heath, Hampton Town, Hamptonshire, HA01 1AS
but i need to have it split in to individual cells so
Cell A1 would be 101 hampton court
B2 Hampton Heath
C2 Hampton Town
D3 Hamptonshire
E5 HA01 1AS
each part of the address is split by a comma, so i have tried to use that as a identifier as to where that part of the address is, but failed on that, i can separate out the first part and the post code with a find and replace but not the middle.
also i need it to work backwards ie
it finds the post code first,
then the county
then the town
as those 3 are always the last 3 parts, but the address could only have 1 line of addres beofre the town or 3, and it would get messed up as all the post codes, county ans town needs to be in their respective columns
I have a two column A and B at Sheet1. Col A is a Date wise column and Col B is of the Values. I need formula for getting sum monthwise in sheet2. i.e the sum of jan, feb, mar etc
View 9 Replies View RelatedI have the following situation. I work off-site most of the time in another office. I would like to have a macro on my main office PC to run on a monthly basis at a set time.
For instance on the 15th of every month at 9:00 am the macro would go into a shared drive and pull an updated copy of a report, redo the report and send it out to various offices. I have VB code that performs all the tasks except for setting a timer to tell it too run on the 15th of every month at 9:00 am.
I wish to create a Vlookup & summing qty by month.
In sheet1 is date
Column A = Date
Column B = Code
Column C = Qty
In Sheet2 I wish to create Vlookup.
I have the code in Column A4 going down AND wish to create Vlookup in column C4 for month Apr-09(c3) display total qty.
In sort look up code - for the month and sum qty .
code Apr-09 May-09 Jun-09 etc
SW L 60 15 55
SW M 10 35 45
DD L 30 30 25.
I am trying to convert quarterly data to monthly
The quarterly data columns go: Mar-14, Jun-14 etc
The monthly data columns goes Jan-14, Feb-14 etc
I am trying to use a vlookup and match formula but as you will see in the attached file it is only working for those months that are labelled in both data e.g. March 14, June 14
Is there a formula that will pick up for example that January and February numbers should be drawn from the March 14 quarter, April and May from June quarter etc?
I have a table which has the following columns:
Date - Data1 - Data2 - OtherData1 - OtherData2
I came up with some formulas to count my data monthly. I have 12 tables with this kind of formula in it:
[Code] ....
Where B12 is the year and A213 is my month number. My first try on the "date filter" looked like that:
[Code] .........
And it wasn't working so I thought it was because the 31 wasn't a good idea for non-31-days-months but none of the formulas above are working.
(BTW, IDK why it's not working but I have data in my table for months 10, 11 and 12 and the only calculation tables that are calculating data are the ones for months 9 and 10. The results are the same in these two tables and are counting all my Table1[Data1] and [Data2] (the count is not monthly))
Find the attached excel sheet.
I have, every month data like for one Year, every day in a month we will update the sales information in to excel sheets like jan, feb, march, ...December
In the Main sheet i want total, i have bunch of data and wide range of items, how to get monthly consumption into main sheet.
excel.xls.xlsx‎
I have a list of dates with respective balances. I am wondering how to get Excel to determine if the end of the month has passed after a certain date and then calculate the return for that month. What is the most efficient way in your opinion?
Here is a small data sample:
27/12/2005 06:23 0.3%
27/12/2005 05:47 -0.6%
29/12/2005 06:53 1.3%
04/01/2006 17:55 -0.1%
09/01/2006 15:35 3.99%
09/01/2006 15:46 2.54%
09/01/2006 17:07 1.8%
12/01/2006 07:12 -2%
12/01/2006 13:37 1.5%
12/01/2006 13:39 0.8%
12/01/2006 13:58 0.01%
I need to create a running monthly total formula for a worksheet. This is something i need in the data, so i can manipulate it without using a pivot table.
I think I would use the SUM, MONTH, and IF formulas, and maybe EOMONTH.
I guess where I'm stuck is figuring out how to make conditions for my SUM formula. So as the dates go down the page, I would like a running total in a column to the right, that will also restart with every new month.
Attached is my example.
How to translate dates which i already have in the US format, to the UK format.
i.e. mm/dd/yy becomes dd/mm/yy