Automatically Populate The Below Rows With The Synonyms
Oct 15, 2009Can we use the inbuilt thesaurus that MS excel has through macro.
i.e. if I select a word and play the macro, excel will automatically populate the below rows with the synonyms.
ADVERTISEMENT
Enhance Wordlist Through Synonyms In Column.D
Dec 23, 2008I have to enhance the number of words in column A through the synonyms from column D. i have an excel worksheet containing a wordlist:
Column A contains Words(language A)
Column B contains transcription
Column C contains grammatic information of the words
Column D contains Meanings( language B);µ synonyms(of word in Column A also in language A)[seperator between Menaings and Synonyms is ";µ" and seperator between different Meanings and between differen Synonyms is ";"]
For example:
Col.A(Germen words)---------Col.B--------------Col.C---------------------Col.D(English Meanings ;µ German synonyms)
lieben------------------------ lieban --------------- v.-----------------------to love;to affect;µmögen;seks haben;etwas möchten
seks haben----------------------lieban-----------------v.-----------------------to love
Now a macro is needed which reads the synonyms in column D which follow the meanings after ";µ". After reading the synonyms the macro should look if theses words also exist in column A as words or not. If a synonym doesnt exist in Column A then new entries should be made at the end of the wordlist. That sysnonym should be added as new entry to colulmn A. According to our example it should later look like;
After running the macro:
Col.A(Germen words)---------Col.B--------------Col.C---------------------Col.D(English Meanings ;µ German synonyms)...............
Automatically Populate Dates ...
Mar 28, 2009I've asked this similar question on another message board (the Microsoft help community), but failed to follow-up quickly enough for the support I've come here to ask for. My situation involves a spreadsheet that is used to track days worked over the course of a week. I have the days of the week listed in one row (Sun - Sat) and in the row above, a place to put the day (i.e. - 3/28). I asked for help with a macro that would allow the user to place the date into any of the cells above the days of the week, check to ensure that the corresponding day of the week is correct, and if so, populate the other remaining empty dates automatically. Below is the macro that was kindly provided. It works perfectly as long as my data is in the referenced ranges (A1:G1, etc); however, my actual data is in range L6:R6 for the dates and L7:R7 for the day of the week. (example below). I've been able to pick apart the code to understand how to change most of the macro to accept input from the different range; however, I'm unable to comprehend what I'm missing to complete the modification.
View 6 Replies View RelatedCell To Automatically Populate
Mar 26, 2008i am working on a spreadsheet that includes a large amount of statistical numbers / records. one part includes a win / loss column and the very next column i am entering the final score for each game. to max this easier to comprehend, there are only 3 columns. 1st column lists my opponent, the 2nd lists, with just a red L for loss, or a green W for win, and the 3rd column has the final score. (my score is always first, regardless of whether i won or lost the game.)
OPP F SCORE
--------------------------------------------------
John W 23-10
Paul L 17-25
Terri W 10-7
This is what i'm searching for: (and the easiest way possible b/c i'm not familiar with macros / visual basic, etc.) ... Once i enter the score: ##-##, I would like the "F" (final outcome) cell to automatically populate either a bold red L for a loss, or a bold green W for a win. My scores are almost never 3 digits, so they would almost always be ##-##. if u need me to provide more info,
Automatically Populate A Summary Worksheet
Jul 31, 2007Is it possible to automatically populate a summary worksheet, based on matches in other worksheets within the workbook which match a particular date?
I have a workbook with 15 worksheets--each sheet is setup like a database with 4 columns (fields). One column is for the date.
I would like to populate a summary sheet that serves as an executive summary of all "records" which match a particular date.
Automatically Populate Another Cell When One Is Updated?
Apr 27, 2014I have a spreadsheet where vehicle milage is entered at the end of each month. On another sheet I have the vehicle fleet numbers and the the months along the top. What I need to happen is; when the mileage cell is updated I need the cell in the other sheet to be automatically populated, when the mileage is updated the next month I need the next cell(February)to be populated with the new milage and so on. The aim is to calculate monthly milage for each vehicle without having to enter the date at the beginning and end of the month.
Everyone I work with is completely computer illiterate and only knows how to enter the data the same way they always have(just the once at the end of the month) changing it up will only cause issues.
Automatically Populate TextBox In UserForm
Jun 28, 2007I have a userform that pops up upon opening a file. The user form has
5 text boxes names Zero, Two, Four, Seven and Nine. I would like each of these text boxes to automatically populate with the values last used. The values last used are stored in Worksheet "Index Settings" in Cells "C3:C7".
Automatically Populate Cells If Value Exists Within Range
Mar 22, 2013I need to summarize some information from a different worksheet. Worksheet A(WS-A) is the summary and worksheet B (WS-B) is the source of information. On WS-B I have a range of values under the title "Materials" which I use to put together an estimate. This range has about 25 rows and not all of them are populated depending on the needs of the particular job.
If it matters, the Materials cells are populated by a drop down "list" from yet another worksheet. On the summary (WS-A) I want to show only the cells from WS-B that have a value in them so that if, within the Materials worksheet, there are only 6 rows that have data in them...only those 6 rows are shown on the summary worksheet.
Automatically Populate 9 Box Grid Using Excel Data
Jul 1, 2014I'd like to automatically populate a 9 box grid using data from Excel. The number of names for each rating can be anything from 1 to 100 so the size of the grid would need to be adjustable. I would like one table for each function and grade. Attached is what I'm trying to do. In the 'example tables' sheet, I've shown how I'd like the tables to look, but with my live data the tables would be bigger so I'd like to do one table per worksheet (or possibly one function per worksheet - so 3 tables).
View 3 Replies View RelatedAutomatically Populate Column With The Most Current Date
Oct 11, 2009I want to automatically populate C2 with the most current date from B9:B14.
I can't seem to figure out the formula.
Automatically Populate Data To Multiple Sheets?
Dec 31, 2012I have a spreadsheet that contains many lines of information that will constantly be added to and updated. One of the columns contains a drop down with 4 possible options. I am trying to get the data to copy to a sheet based on 1 of the 4 options selected. So for example, if Education is selected, then that row of data should also appear in the Education sheet. Same goes if one of the other options is selected.
I have seen several examples on this forum, but they are mostly macros (or formulas that don't quite apply). I am trying to use formulas so that the information is updated live so macros don't really seem to be a viable option.
I am including a sample of the spreadsheet with data on the main sheet and how I want it to look when it is transferred over to the other sheets. I had to substitute a lot of the information (with numbers or filler words) due to it being confidential.
Automatically Populate Combobox With The Data In A Certain Range
Mar 12, 2009I would like to know how to automatically populate a combobox with the data in a certain range. Attached is a simple workbook with the example. I know how to do this with the additem. But I dont know how to create the array or userform initialize to populate the combobox with the range.
View 3 Replies View RelatedAutomatically Populate Cell Based On Worksheet Name
Mar 18, 2009I have a macro that copies data from 6 different worksheets into one summary worksheet - based on certain criteria - I need a way to note on each row of the summary sheet which worksheet it was copied from. Each worksheet is specific to a salesperson, so ideally I would like that salespersons last name to populate in column on the summary page for each line of theirs that is copied over....here is my current macro I use to copy the data: (this scrpit is repeated for each sales persons sheet - "Blankenship", "Dew", etc...)
View 5 Replies View RelatedPopulate Automatically With Predefined Value If Cell Is Of Certain Colour
Feb 8, 2012I'm looking for a cell formula. here is an example:
In cell A2, I want it to populate automatically with a predefined value if cell A1 is a certain colour, as below.
A1 A2
559.00
I have conditional formatting in cell A1.
IF / VLOOKUP (cell Automatically Populate Commision Earned)
Mar 2, 2010I am trying to get a cell to automatically populate commision earned.
Commision is worked out as a percentage to gross profit and works as follows:
£0-4000 = 0%
£4001-8000 = 1%
£8001-12000 = 2%
£12001-16000 = 3%
£16001+ = 5%
I have my spreadsheet that details their sales and profit. the profit is calculated in cell M45.
I have tried for ages to get an equation to work, and have ad no joy. It is actually driving me mad now. I need a better man/woman than me.
Match Cells In Another Column And Populate Data Automatically
Oct 11, 2006I have a worksheet where I need to match the work items from Region A to Region B. If the work items match , then I need the formula to automatically populate the corresponding data in the next 3 columns as similar to Region A. I have tried searching the forum and but I could not work out the formula. I am not sure if the formula is Vlookup or INDEX/Match which both I am not well verse. I have attached a sample sheet.
View 4 Replies View RelatedExcel File To Automatically Read Date & Pre-populate From 1st Field
Aug 13, 2014i have a file that needs to have daily postings to it, I would like for it to automatically generate today's date and then if you change figure 1, it carries over to figure 2.
View 3 Replies View RelatedSort Table Of Data By Status And Automatically Populate Another Sheet
May 2, 2012I am trying to sort a table of data by "Status" and automatically populate another Sheet. In Sheet 1, I have data as follows:
Issue Status Issue - 1 Open Issue - 2 Closed Issue - 3 Closed Issue - 4 Open Issue - 5 Closed Issue - 6 Open
I want Sheet 2 to automatically sort this information by Status = "Open".
Issue Status Issue - 1 Open Issue - 4 Open Issue - 6 Open
How I can accomplish this by Excel functions (I do not want to use Pivot table)?
Automatically Populate 12 Month Calendar With Result Depending On Start And Finish Dates
Mar 26, 2014I've just started working on an FTE calculator and wish to populate a 12 month calendar with FTE depending on the start and finshed dates.
FTE Calculator non nursing.xlsx
I've attached the file. In Column D the user would select the month the staff start and in the Column E the month the staff will finish. I would like the fte that is calculated in Column Z then to populate in the 12 columns AB:AM (Jul to Jun) with corresponding month start and finish.
Paste Rows Without Overwriting Other Rows (automatically Shift Other Rows Down)
Jan 3, 2010The number of rows you are pasting and then you can select that same number of existing rows and use "insert". This is what I'm trying to achieve:
(before paste)
A
B
C
(after pasting unknown number of rows)
1
2
...
n
A
B
C
Is there really no built-in way to do this?
Configuring Dates: Enter A Date In One Column, Another Column Will Automatically Populate With The 1st Of The Next Month
May 8, 2009how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
Matching Pairs - Column To Automatically Populate With Any Of 3 Digit Numbers That Share Two Numbers
Mar 12, 2013This is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
VBA Code To Populate A Cell Automatically Whenever Another Cell Is Filled In Manually?
Mar 29, 2014I have a spreadsheet with 6 hidden columns (B to G). Rows 1 to 14 are frozen and have data that comes from another work book and these rows will be protected. The user will enter data from H14 to U14 and then H15 to U15 for the next row and so on down the sheet. The number of rows of data over a week is variable, a minimum of 21 rows (3 per day) but no maximum.
When the user starts entering new data in the column range H to U I would like to automatically populate the 6 hidden cells on that row with information from particular cells in protected rows 1 to 14. For example B14 would populate with the value from I4, C14 would populate with the value from I5, D14 from I6, E14 from I7 and so on whenever someone enters a value anywhere from H14 through to U14.
I can understand that a worksheet change event would be useful to do this but I guess then it wouldn't want to run every time each cell is populated so I think if it had to activate on a single cell change then the cell in column L would be best. Also, as I understand it, there can be only one block of code per sheet that operates on a worksheet change event, have I got that right? If that is the case then I assume all the code to populate the hidden cells on each row will need to be in this block of code.
How To Populate Rows With Text And Date
May 15, 2014just want to input a simple series.. in a column and populate all rows..
A1
ROW 1 DATE: 15/05/2014
ROW 2 DATE: 16/05/2014
ROW 3 DATE: 17/05/2014
ETC. i can make the date go in series all the way down.. soon as i add date: in front of the date in same cell it messes up the series. need the "DATE:" in back and "15/05/2014" in color not black
whenever i attempt any formula i found on web it is all black.. and just the 2014 value changes..
Alphanumeric Counter (automatically Populate A Column With An Alphanumeric)
Jun 23, 2009I need to automatically populate a column with an alphanumeric MFR0001 to MFR9999 and am currently using the formula below to add 1 to the start point (A1)...
A1=MFR0001
Formula in A2 =LEFT(C1,3)&(RIGHT(C1,4)+1)
This works perfectly if I start at MFR1000, but breaks and drops the 000 if I use it on the number I need to start with (MFR0001).
VBA To Name New TAB And Populate With Specific Wanted Information From Rows
Feb 1, 20081. When text is entered into a specific cell in the Master Sheet a new Tab is created named after this text and a second string of text i.e the date.
2.At the same time as this TAB is created I would like only the rows with checkboxes ticked in the Master Sheet to be copied to the new TAB(Not the Checkboxes themselves) [possibly using TRUE/FALSE in "B" row].
3.I would like the formulas, formats of these checked rows to be copied too.
4. Additionally the first 12 rows(all headers) and the last row(subtotal row)should be copied too.
The idea of the Workbook is to have an overall options sheet that is customised on a per customer basis with a record saved on a new tab in the same workbook.
Populate A Given Number Of Rows Starting At A Specific Location
Jun 2, 2014I have a spreadsheet where I track resources needed on a project. Each resource that is selected in the resource column has a corresponding % avg and an average number of months where the resource is used. % Avg and # of Months are found in a different worksheet.
What I am looking to do is, for example: if resource A will be on the project starting in May 2015 and assigned at 30% for 7 months, I want to populate 30% starting in the colunm labeled May 2015 and copy the 30% so that a total of 7 months are populated. Also, if any of the values change (i.e: the Resource Name or the Start Month) I want to erase all the percentages that were entered in the row. How can I achieve that with a VBA code? I have formulas that retrieve the # of Months and the % Avg already.
These are the columns that I have in my spreadsheet:
Resource NameStart MonthJan-15Feb-15Mar-15Apr-15May-15Jun-15Jul-15Aug-15Sep-15
Auto-Populate Date When Data Entered Into Rows
Aug 10, 2014I am building a budget spreadsheet and would like the date to automatically populate in column H when data is entered into rows J through AN, or alternately update column H when a sum total is populated in column I
I need to repeat this for rows 4 through 63
I was trying to use the following code, but cannot get it tweaked right.
[Code] .....
Find Highest Value And Populate Newly Inserted Rows With Unique ID?
May 8, 2014I want to find the highest value in a column (MaxValue) and populate first blank cell in a column with Maxvalue+1. Basically, I want to provide each new row with a unique project number. First, I'm running a macro to insert rows which copies the formula and format from Row 4, the user enters how many rows he wants and the requested number of new rows are inserted below Row 4 (That bit all works fine) . I now want to find the highest project number that has been used in Column 1, starting at Row 4, increment the highest project number by 1 and populate the newly inserted rows with the new project number.
I have a couple of problems with code I'm trying to use: If the active cell in column 1 is highest value the code ignores the active cell, i.e. this works once, as the cell that I have just populated becomes the active cell and the highest number, i.e. the next time the macro runs I get the same number as the active cell.
Ideally, I'd like use the number of rows that the user requested in the macro to insert new rows to be used in this macro to provide a unique project number for each of the newly inserted rows. (The add new rows macros uses Dim NoToAdd As Integer, as the number of rows that the user wishes to insert). Although, I'm quite happy to run the macro several times to find and populate projects which have not been allocated project numbers.
Here's where I've got to:
[Code] .....
Populate Cell Value And Rows Text In Another Sheet Which Match Column Head?
Apr 5, 2014I have a excel workbook. which have a master data sheet or table as drawn.
[Code] ........
The above sheet is master sheet. I have also worksheets which named are matching with column head from "DARCL", "MMT", SSL"......till "GRT" (No "order" named worksheet is there). So I want to feed data or value as total order in "ORDER" column, (it is not necessary to put the value in each row) and the total value or number is distributed by me in particular column or colums. After data feeding I have required a command button or any button that can copy or show the reference row (customer name) with its cell value in the matched column head worksheet. As example: total order is 200 put in "ORDER" column in row 3, and 200 is distributed as by myself 100 in column "E" (MMT) and 100 in column "H" (RITC) and so on...after this feeding, I click the button and the data will show or copy as table M/S UIW : 100 in "MMT" worksheet and M/S UIW: 100 in "RITC" worksheet.
As example layout of others worksheets.(attach pic)
After click command button on the master sheet the related customer name and the value will be populated in respective matched column head with worksheet. If there is no cell value in master sheet the below mentioned cell are hides.
master sheet.jpg
others worksheets.jpg