# Average Out Scores In A List Based On When The Score Was Given

Feb 24, 2010I'm trying to average out scores in a list based on when the score was given. For example:

Average (of three numbers below)

2/26/2010 99%

I'm trying to average out scores in a list based on when the score was given. For example:

Average (of three numbers below)

2/26/2010 99%

ADVERTISEMENT

I want to see if i can make a formula that works out how a player got a score based on a scoring system. See the attached file for more details. I want this to show that the player scored or didn't score, played a full match or was a substitute, was booked or wasn't booked and was sent off or wasn't sent off.

View 5 Replies View RelatedNeeded for a golf league where the average of the best three of five games is needed - so, low score is better but score must be greater than zero. Each row is a player, column A is the players name, B-F 5 different games and the average will be in column G. I tried this formula but if someone didn't play at least 3 games SMALL returns the #NUM! error value. If I enter 0 for games not played then SMALL picks up the 0 as the lowest score. =(SMALL(B3:F3,1)+SMALL(B3:F3,2)+SMALL(B3:F3,3))/3. How to nest the different functions (if>0, small, and avg would be good too)

View 2 Replies View RelatedI would like to set up a Excel spreadsheet for golf handicaps where it will use the 4 lowest scores of the last 5 entries. It must be able to work even if there are missed entries (someone didn't show up/blanks ignored). I would like it to work if there are only three scores used at the beginning of the season, but when there are 5 or more scores, use only the 4 lowest scores out of the last 5. I want it to average these scores. The scores would start in column d. The following is an example of scores with an underscore being a blank:

Golfer 1 45,50,42,43,46,37,45,45,46,44

Golfer 2 41,43,42,_,41,_,_,47,42,39

Golfer 3 44,43,45,54,_,45,43,40,42,_

I'm doing a course at the mo and get graded monthly. I have a spreadsheet with my grades on 'assignment1, grade A, assignment2, grade B and so on.

What i want to do is have a cell that has the aveage of all grades. So if i had...

Grade A

Grade B

Grade C

the average is B.

I have 6 different sections of questions, each section having a final average score between 1 and 5.

I would like to somehow create a percentage weighting on each of these sections and then have a final score accross all section, taking into account this weighting?

Im creating a spreadsheet at work, which has a drop down box with the options of open and closed in it.

I also have a column for length of time of the claim, what i need to do, is now find a way of getting a average length of a claim, but only to see the closed option from the drop down box.

for example,

row 1

open date - 02/06, closed date - 01/07, dropdown box - closed, life - 29

row 2

open date - 10/06, closed date - n/a, dropdown box - open, life - -39400

as you can see from the example above, i cant simply do a average of the whole column, as would read the open ones as well. so is there a way of doing the formula, but telling it to only see the open, or closed ones?

Here is my formula that does not return accurate results:

=IFERROR(SUM(SUMIFS(Tenure!$H:$H,Tenure!$E:$E,{"=1100","=1090"},Tenure!$C:$C,{"=12","=14","=13"},Tenure!$G:$G,"=1/1/2013",""})/SUM(COUNTIFS(Tenure!$E:$E,{"=1100","=1090"},Tenure!$C:$C,{"=12","=14","=13"},Tenure!$G:$G,"=1/1/2013",""}))),0)

I need to average column H from the sheet Tenure IF column E is 1100 or 1090 (formatted as text) and IF column C is equal to 12, 13, or 14 and IF column G is less than or equal to a date and column I if greater than or equal to a date OR if this column is blank.

I tried AVERAGEIFS, the above route and many others. For whatever reason, I have been unsuccessful, but close many times.

My attached files contains stock returns for companies. Each sheet contains the returns over a 5 year period for a certain stock, with the ticker symbol of the stock used as the sheet name. I want to write a sub that presents the user with a user form. This user form should have an OK and Cancel buttons, and it should have a list box with a list of all stocks. The user should be allowed to choose only one stock in the list. The sub should then display a message box that reports the average monthly return for the selected stock.

View 4 Replies View RelatedHere is the data i'm working with.

Name of player

Score of round

bag tag the player came in with

bag tag the player is leaving with

Here is what I'm trying to accomplish. I usually just copy and paste (then sort the data) but I want a spreadsheet that I can enter raw data and just look at the results I will already have the players names in my sheet. Before the round I'll get everyone's tags it will not always be in order (EX: 1,3,15,22,34,66...etc) some tags will always be missing. After the round I'll enter the scores. What I can't figure out is how to leave my sheet in alphabetical order and have my spreadsheet populate the "leaving tag" column with the correct tag based on the players score....

name score tagin tagout

bob 22 2 2

carl 44 15 23

ed 33 23 15

Can't tell if that translated, couldn't use a table....

basically I would like to leave column A where it is the whole time add the data to column B and C The use the data from column B to sort the values from column C numerically to column D (basically copy and rank then display the numbers in order). To throw in a twist if the data in column B is the same for two or more people the formula would need to take the lower number from column C to determine who gets the lower tag in column D.

having to create some kind of database in access....

I am trying to analyse a set of scores of different doubles tennis tournaments - new tournaments and new players are continuously being added and so need some dynamic way to analyse. I would like to extract sort of a ranking system based on the scores by each player and one way to do so is to analyse the scores by tournament. Basically the same players play in different tournaments and i want to be able to know who performs better than others i.e. get better total scores during a tournament.

The attached gives an example of the data i have as well as the result i would like to achieve. It does not really matter if a formula system or a pivot solution is provided as long as i achieve the result, and can add to it as new data is populated. I have been trying all sort of solutions using pivots, matches, lookups etc but no luck yet.

I have a workbook with two tabs: Results (containing exam results) and Percentile (containing percentile rankings based on scores). There are different rankings for different exams.

I need the percentile ranking returned (on the Results tab) based on the exam result for each student. e.g. for exam M111 a score of 36 would return a ranking of 95, a score of 18 would return a ranking of 35, etc. I've attached a sample workbook.

I am trying to distribute the total number of sessions (cell H1) across the groups in column A based on the score of each group (column D). The number of sessions a group receives cannot exceed the max (cell H2) or be less than the min (cell h3).

View 7 Replies View RelatedI have a spreadsheet which calculates the score for a particular item.

In cell M5, the answer should be 30 since the rating is 3 and weightage is 10 ( 3 X 10).

How do I automate this task via a formula ?

I have three columns in the spreadsheet.

sheet1

A BC

Santhosh314

Praveen224

Praveen012

Praveen37

Santhosh38

Praveen120

Praveen036

Santhosh19

In another sheet (sheet2) output come like this.

A B

Praveen 3/7

Santhosh 3/8

How to return ranking based on students' score?

STUDENT SCORE Rank MAY 11255 4 JACK 5262 5 TIM 432525 1 STEVEN 352332 2 HUGO 32232 3 FERNANDO 5153 6 SANDY 4556 7 SARAH 2265 8

There are scores in B1:B10 (10 scores). I want to take the top 8 scores. So I used this formula which works just fine.

=SUM(LARGE(B1:B10,1),LARGE(B1:B10,2),LARGE(B1:B10,3),LARGE(B1:B10,4),LARGE(B1:B10,5),LARGE(B1:B10,6) ,LARGE(B1:B10,7),LARGE(B1:B10,8))

But I'm trying to make the formula a bit more dynamic. Is there anyway to have a set of data in B1:B50 (50 scores will probably be the most) and take the top x scores? X will be set in a separate cell (lets just say A1)?

I have a raw score for each case. I need to map those raw scores to scale scores. For example, a raw score of 0 to 0.49 maps to a scale score of 120, a raw score of 0.5 to 0.99 maps to a scaled score of 110, etc. There are a total of 13 possible scaled scores (120, 110, 100, ... 20, 10, 0). Is there a way to do this in Excel2003? (Note, if anyone on the list is 'bilingual' (Excel and SPSS), I'm looking for the Excel equivalent of the SPSS command RECODE raw (lo thur .49=120), (.5 thru .99=110), etc. INTO scale.

View 2 Replies View RelatedHello, I have a column with 100 numbers in it. I want to be able to choose a number N and then calculate the average, minimum and maximum of the first N numbers in the list.

I have played around with countif and sumproduct but can't figure it. I don't know how index works, and wonder if that is the key.

I have lists of numbers in a columns and would like to elliminate high outlier values in each column. Each list is different so there's no way to just set a max value and say that any value above it is an outlier. What I'd like to do is to average the top 5 or so max values for example, and then say that any vale above this average is an outlier. So a formula such as =average (max1,max2,max3,max4,max5) would work if it's possible to derive max1, max2 and so on. Or maybe there's a different way of accomplishing this?

View 3 Replies View RelatedHow do you calculate the average of the last 20 values in a dynamic list? The list is in column A and updates every day by adding a new value in column A.

View 3 Replies View RelatedFinding an average age from a list of dates. This is just a small sample:

7/9/2013

7/10/2013

7/10/2013

7/10/2013

7/11/2013

7/11/2013

7/14/2013

7/14/2013

7/19/2013

7/19/2013

I tried using =AVERAGE(DAY(A1:A10)) CTRL + SHIFT + ENTER, but that just doesn't seem correct.

I'm currently stuck with the following problem. I have a fairly large database with 10,000+ companies (in the rows) over 10 years (in the columns). I want to aggregate industry averages of a financial item in so-called SIC codes (there are approx. 1,000 different 4-digit SIC codes).

I've been using the daverage function, which works for one criterium (e.g. SIC = 0100) but not for the entire range of criteria. Does this mean I'll have to manually adjust every daverage function for every single SIC code? Or can this process be automated in some way?

Attached is a simplified version of my database file.

I need to find the average of a list of text cells. My list is in column A, and in column B I've assigned each of the text cells with a numeric value. I'm then doing the average on Column B which will return a numeric value which will represent one of the text values in column A.

My average formula then looks like this:

=VLOOKUP(ROUND(AVERAGE(B2:B48),1),$G$2:$H$25,2,FALSE)

Can do this without using the helper column B and do an average formula using a VLOOKUP?

Data example is displayed below. I need to know how to find the average, not date average, but count. What is the average per day? Example on 2/9/2014 there are 12 entries but on 2/10/2014 there is only 1. Example: For all the lines of data that I have, what is average per day?

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

2/9/2014

[code].....

I would like to calculate the moving average for the first ten rows in a column where each new entry is added to the cell above the last entry.

For example

A5, 2

A6, 3

A7, 4

A8, 5

A9, 6

A10, 7

A11, 8

A12, 9

A13, 10

A14, 11

A15, 12

Therefore in the current list the average is AVERAGE(A5:A14)=6.5.

The next entry added to the list will be in cell A4 making the list look like this

A4, 1

A5, 2

A6, 3

A7, 4

A8, 5

A9, 6

A10, 7

A11, 8

A12, 9

A13, 10

A14, 11

A15, 12

The average of the first 10 cells is now AVERAGE(A4.A13) = 5.5

I would like to enter one formula in say cell A1 that will calculate the moving average in the first ten cells each time a new entry is added. Naturally as needed, new rows are added below cell A1. I hope my problem is clear.

as I have been unable to solve it myself. I have tried using offset but have been unable to resolve the issue.

I have a list of named cells (i.e. Group1, Group2, Group3, etc)

I have a form control that allows the user to select which of the groups they would like to include.

I need to create a series of formulas that average the price of all the chosen groups. So if they just want to average Group1, Group3, Group5 they could do so by simply selecting the checkboxes associated with those names.

I am struggling to be able to create a formula which will look at the list of chosen values and Average only those names. If all groups were chosen this would be easy as I would simply use the:=Average(indirect(a1),indirect(a2)...and so on. However that assumes that I always know which values are being chosen. I have a fixed list of choices but if they don't choose one of the options then the indirect statement will be referencing a null value which than either returns to me a #REF or will factor in a '0' which then throws off the average.

I have a simple one today but on a time crunch so I don't have time to go through the book.

I am trying to hlookup a list of values from a table and average the results. The values are setup horizontally.

I will do my best to explain but just in case I have attached a worksheet to make things easier. I have a list of a few thousand products with data on each product. When I run through a series of cuts, I get a subset list and want to be able to calculated a weighted average by somehow saying to do a weighted average (and/or count, and/or average, etc.) on the characteristics of only the products in the subset.

View 9 Replies View RelatedI want to create a long list of 10,000 random numbers between -100 and +150, but do it so that the average of all the random numbers equals 20.

View 9 Replies View Related
Copyrights 2005-15 www.BigResource.com, All rights reserved