Average Multiple Indirect From Dynamic List
Dec 18, 2012
I have a list of named cells (i.e. Group1, Group2, Group3, etc)
I have a form control that allows the user to select which of the groups they would like to include.
I need to create a series of formulas that average the price of all the chosen groups. So if they just want to average Group1, Group3, Group5 they could do so by simply selecting the checkboxes associated with those names.
I am struggling to be able to create a formula which will look at the list of chosen values and Average only those names. If all groups were chosen this would be easy as I would simply use the:=Average(indirect(a1),indirect(a2)...and so on. However that assumes that I always know which values are being chosen. I have a fixed list of choices but if they don't choose one of the options then the indirect statement will be referencing a null value which than either returns to me a #REF or will factor in a '0' which then throws off the average.
View 3 Replies
ADVERTISEMENT
Sep 18, 2006
I have a dynamic validation list (see attached) which will not accept the indirect function as a formula in the listbox.
Using the named range on its own works fine, but using the indirect generates an error.
View 3 Replies
View Related
Jan 28, 2012
How do you calculate the average of the last 20 values in a dynamic list? The list is in column A and updates every day by adding a new value in column A.
View 3 Replies
View Related
Aug 18, 2009
I am trying to develop an Indirect Indirect Validation drop down list. Example, Building - Floor - Room, i.e. Select Building from a Validation drop down list. Then based upon the Building selected, select only the Floors applicable to the Building Selected. I am able to achieve this via an Indirect Validation drop down. However, when I attempt to then select the Rooms applicable to the Floor of the Building I selected, I can not produce an Indirect Validation off a previous Indirect Validation.
In the attachment, I have used Plant - Location - Room. I have name ranged the selections, and have used Validations Lists for Plant, and Indirect Validations for Location. The error occurs where I attempt to do an Indirect Validation for Room.
View 3 Replies
View Related
Feb 7, 2014
I have a data validation list where more than one value should show the same list. Instead of make multiple range, I want to make it so if any of the values are in a cell the data validation list will show the list that goes with those values.
View 4 Replies
View Related
Dec 27, 2012
In the example I have attached there are two sheets, Details and DataTables. There are also a number of named ranges, both static and dynamic, that refer to data on the DataTables sheet. Most of the static ranges were added for debugging purposes. The tables have been shortened for this example.
On the Details sheet column A has a drop down that allows you to select the make of a device. Column B builds its drop down list based on what is selected in column A. The data validation in B2 uses a named dynamic range and the drop down does not work. The data validation in C2 used a named static range and the drop down works.
Column C will fill in the RU value based on what is selected in column B. Cell C3 uses named dynamic range and it does not work. Cell C4 uses named static range and it works.
I would like to used named dynamic ranges if possible so when data is added to the tables the named dynamic ranges will self adjust. Can what I want to do be done?
Dynamic Range.xlsx
View 8 Replies
View Related
Feb 3, 2010
I have a dynamic named rage "AREA" which can contains values like "Area1, Area2, Area3, ..."
For each item in list AREA I have another dynamic named range, named exactly as the item, so for example I have a dynamic named range "AREA1" with values "SubArea1.1, SubArea1.2, ..." and also a dynamic named range "AREA2" with values "SubArea2.1, SubArea2.2, ..." and so on, I think it's pretty clear and straight forward (I am modelling the fact to have several areas and each of them has several sub areas).
Now, I have cell A1 being validated against the list AREA, that is, the source for A1 is "=AREA", so that I can choose one of the values in the named range AREA; I also have cell A2 being validated against the list that I choose in cell A1 using the INDIRECT function, that is, the source for A2 is "=INDIRECT(A1)".
I have already realised that this approach for cell A2 does not work, as it seems that INDIRECT does not work for dynamica named cells.
An option would be using the following for the source of A2: ....
View 9 Replies
View Related
Jun 1, 2008
=INDIRECT(CHAR(39)& F2 & CHAR(39) & "!BC7")
I would like to make BC7 dynamic. In other words, the text in this formula, BC7, should come from a cell A4 which today says BC7 but next month the value in A4 will say BD7.
View 9 Replies
View Related
Jun 18, 2014
I am attempting to create a form in excel with dynamic data validation fields. What has me stumped is that I want to create multiple complex dependencies (for instance, if you select something from a drop-down list in the first field, that then gives you a specific range in the second field. Then based on what you placed in the second field it gives you a specific range in the third field.). What I can't seem to work out is the formula for making this work.
Is this impossible? Also sometimes the third field my be blank.
Here is an example of what I am trying to accomplish
Assets 2.PNG
View 1 Replies
View Related
Feb 11, 2014
Here is my formula that does not return accurate results:
=IFERROR(SUM(SUMIFS(Tenure!$H:$H,Tenure!$E:$E,{"=1100","=1090"},Tenure!$C:$C,{"=12","=14","=13"},Tenure!$G:$G,"=1/1/2013",""})/SUM(COUNTIFS(Tenure!$E:$E,{"=1100","=1090"},Tenure!$C:$C,{"=12","=14","=13"},Tenure!$G:$G,"=1/1/2013",""}))),0)
I need to average column H from the sheet Tenure IF column E is 1100 or 1090 (formatted as text) and IF column C is equal to 12, 13, or 14 and IF column G is less than or equal to a date and column I if greater than or equal to a date OR if this column is blank.
I tried AVERAGEIFS, the above route and many others. For whatever reason, I have been unsuccessful, but close many times.
View 3 Replies
View Related
Oct 11, 2011
I need making a dynamic cell reference in an indirect formula, which looks at a different workbook.
The other workbook is called: ESF.xlsx
The sheet name in the other workbook is defined in Cell B2
The first cell i need to pull across is B115.
In cell B8, This is what i have so far:
=INDIRECT("[ESF.xlsx]"&B2&"!"&"B115")
How do i make it so that i can copy this formula quickly, but so only the row and column reference change?
Like in C8 i would want it to look at cell C115, In C9, id want it to look at C116 etc.
View 2 Replies
View Related
Nov 22, 2006
The following formula produces the desired result:
=COUNTIF(INDIRECT(TEXT(A8,"mmm")&"!B2:Z100"),"SK")
but replacing the range of cells with a dynamic named range returns #REF!:
=COUNTIF(INDIRECT(TEXT(A8,"mmm")&"!Data"),"SK")
where A8 is the date 01/01/07. I'm trying to count items within the range Jan!Data.
I'm not sure if I'm trying to do the impossible, or if I'm missing something.
View 9 Replies
View Related
Feb 11, 2012
The formula is =SUMPRODUCT((Group="A")*(Project_Description="Long Term")*(Profile="B")*(INDIRECT(B9)="x"))
B9 through M9 have header text Jan_2012, Feb_2012...Dec_2012. Basically my aim is to get the above formula working before I drag it across so that the named ranges get picked up automatically from the headers.
Jan_2012 thru Dec_2012 are dynamic named ranges using INDEX (and not OFFSET as someone mentioned OFFSET is a volatile function).
The above SUMPRODUCT formula is giving me a #REF! error for the (INDIRECT(B9)="x") part. I know that because when I replace it with (Jan_2012="x") it works fine.
I realized while writing this that it may be because the named range in Jan_2012 is not the same size as that of other arrays. [but it is the same size - I've re-confirmed just now]
View 5 Replies
View Related
Apr 4, 2009
I have a spreadsheet that has two different data sources (i.e., A and B). The amounts of these data sources (i.e., the number of columns) varies from sheet to sheet. I have to calculate the averages of these data sources independently and together. Because this data is spread across twenty or more spreadsheets, these calculations can be time-consuming. I want to do the following:
1. Locate the last occurrence of the first data source "A" in row and then insert a column after that cell.
2. In that cell, I want to get the average of each data source for each row of data (i.e., there are always 19 rows of data).
I want to do the same two steps for the second data source "B". Then, I want to insert a column after the "B" average and this column will be used to get an average of each row of data from A and B together. Please keep in mind that the number of data sources for A and B varies from sheet to sheet.
So far, I am working on code to try to " find" the text in a range (i.e., find the last instance of "A"), but I cannot figure out how to get it to get it to stop at the last occurrence and then insert a column. I have some ideas about how to calculate the average, but any of yours are much appreciated.
Also, the row with the type of data (i.e., A or B) is named because this function is part of a larger macro. Therefore, it is relatively easy to get to it.
I have attached a version of the file that displays how I want it to look.
The code I have thus far is:
Cells.Find(What:=A, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
View 9 Replies
View Related
Mar 25, 2014
I am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
Dynamic Ranges INDIRECT v2.xlsb
View 3 Replies
View Related
Sep 25, 2009
I can use a dynamic named range and a direct reference to the name and the DV works.
I can use a standard named range (not dynamic) and an INDIRECT() reference to a cell with the name of the range in it and the DV works.
But if I try to use a dynamic named range and an indirect reference to a cell with the name of the range in it, the DV fails.
Any workarounds out there? This project includes a LOT of DV lists, getting them to self-maintain is important if I can do it.
View 12 Replies
View Related
Dec 17, 2012
I am having an issue when I try a chart a named range. The named range "Refers To" is
Code:
=OFFSET($A$1,(MATCH("Kevin",$A:$A,0)-1),,,COUNTA(INDIRECT(ADDRESS((MATCH("Kevin",$A:$A,0)-1),1,1,1)
&":"&ADDRESS((MATCH("Kevin",$A:$A,0)-1),100,1,1))))
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
View 4 Replies
View Related
Jan 6, 2014
I have a complicated situation with Excel since I need a formula that can SUM data from the Pull 1 worksheet into the summary Sheet. I attached my sample for your reference because it is a bit complicated therefore I can not explain. It is better if you look at my Summary Sheet, need formula that can retrieve the same information.
Formula Test.xlsx
View 3 Replies
View Related
Jan 29, 2013
I have 3 related dropdown lists that work perfectly, if you enter data from left to right. But, if you click in the cell containing the second list, which is based on the first list, of which nothing has been selected, you can just type any value in the cell. Is there a way to prevent this, or at least validate that what is entered is a value in the list.
View 5 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Oct 31, 2013
I have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
View 1 Replies
View Related
Aug 18, 2009
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
View 3 Replies
View Related
Dec 18, 2013
I can't work out why my indirect drop down list isn't working. I have named ranges and it works for the first couple but not for the rest.
Tab called 'Work record' is where the drop down lists are. 'Work Type' drop down works fine. Description only works when I select 'Doors' under 'Work type'.
View 3 Replies
View Related
Jun 20, 2014
I need to create a data validation drop-down that is dependant on what has been selected in another drop-down. However, all the solutions I've come across online so far suggest using the INDIRECT function, which is not appropriate in my case. This is because the data upon which the two drop-downs are based on is itself dynamic. My specific situation is this:
In one sheet, I have a list of university names in one column, and in the next column a list of faculties. The same university can appear multiple times in the sheet (once for each different faculty at the university). This information will be added to regularly, with new universities and new faculties added often.
In another sheet, I want a drop-down in one column that takes its validation from the list of universities. I then want a second drop-down that is only populated with a list of faculties at that university. The INDIRECT solution seems to only work if I can define a static range of cells from which to draw this data. How do I do it in my situation above?
View 3 Replies
View Related
Mar 28, 2014
I am using a data-validation-list with =INDIRECT(B7) as the source. It works as expected except for after the file has been closed and reopened. When it is reopened, the source is changed to =INDIRECT(#REF!).
I have tried =INDIRECT('Worksheetname'!B7) but same result.
View 9 Replies
View Related
May 6, 2014
I have a worksheet that is computing the average price for an apartment rental, and I want the average to change when I de-select or select different qualities from my drop down list. For example, I want to look at buildings that allow pets and Utilities included in rent, which hides all but 4 buildings, yet the average remains the same that was calculated with the whole data table.
I know it's relatively easy to just then average that out, but I would really like to have it be dynamic for future additions and comparing many variances quickly compared to other data sheets of buildings in other areas.
View 4 Replies
View Related
Jun 11, 2008
I am familiar with the use of the INDIRECT function to retrieve data from different sheets in a workbook. However, is there a simple way of obtaining a list of all sheet names in a workbook (I have about 50) rather than typing them into the sheet individually?
I can see them in the workbook properties but can't copy and paste them.
View 9 Replies
View Related
Dec 31, 2008
troubleshooting dependent validation list formula. I found the Ozgrid instructions for the Dependent Validation Lists to be verfy informative and I downloaded the "MatchingLists.xls" to use as a starting point.
My challenge is this: The MatchingLists.xls example does not take into account that there may be MULTIPLE dependent lists that have spaces, numbers and other unique characters in the list's source celles. Therefore, I have decided to reference a NameLookup (named range) that has an abbrevieated name for each each item (without numbers & spaces) I am nesting VLOOKUP within the INDIRECT formula to achieve the results I need - but for some reason it fails occasionally and I do not know how to troubleshoot!
Data Validation Source =INDIRECT(VLOOKUP(SUBSTITUTE(E5," ","_"),NameLookup,2,0))
Excel's Data Validation simply returns the message "The source currently evaluates to an error". This is frustrating becuase it is not consistent. It works with some lists and not with others. How do I troubleshoot???
My worksheet is attached for your reference. The source data for the dependent lists is on the Lists sheet. The dependent drop-downs are in columns E-H on the drop-down sheet. The formula that I am having trouble with is in "Subcategory" (column F). For some reason, I cannot choose category "26_Heat_Exchangers" to populate the subcategories. There are a few other categories that this formula breaks on and I don't know why. Please tell me this is not some crazy limitation with Named Ranges.
View 3 Replies
View Related
May 12, 2007
I would like to create a shortcut to averaging ranges. The ranges vary in size so I want to be able to click on a cell. Press Ctrl + W and automatically average the cells above it. I know how to get the short cuts, I just can't figure out the proper code to be able to average based on different sizes. Let me know if you need a better explanation./
View 3 Replies
View Related
Feb 26, 2008
I use a SQL query to export a subset of data from our server. After manipulating the received data I need to Average one column that has been sorted into a number of blocks consisting of variable numbers of rows and post the result to the ajacent cell. I have tried the Countif worksheet function but am unable to resove the syntax problem.
Sub SumBlock()
Dim First_Row As Long
Dim Last_Row As Long
Dim iTotalRows As Long
Dim iCount As Long
iTotalRows = Range("A65536").End(xlUp).Row
First_Row = 2
Do While Last_Row < iTotalRows - 1
Last_Row = ActiveSheet.Range("j" & First_Row).End(xlDown).Row
iCount = Application.WorksheetFunction.CountIf(Range("J" & First_Row), ("J " & Last_Row), ">0")
ActiveSheet.Range("K" & Last_Row + 1).Formula = "=Sum(J" & First_Row & ":J" & Last_Row & ")/iCount"
First_Row = Last_Row + 2
Loop
End Sub
View 5 Replies
View Related
