Cell Placement
Sep 27, 2007
I have a worksheet with 13 Tabs: Each Month + a Consolidated tab.
The Consolidated tab has all of the transactions beginning from January 1.
-The Consolidated tab has 1,000's of transactions.
How would I get March's transactions to begin on A5 of my March tab? Right now, with a simple IF function my transactions for March start appearing on Row 400. Anyway to get it on A5 without VBA?
View 11 Replies
ADVERTISEMENT
May 28, 2014
I am looking for a formula or multiple formulas to perform an If/Then statement, adding and dividing. Example listed below.
If O8 = 'Y' then perform XXXX, otherwise, do nothing.
XXXX= in Y8 search for word 'apple' and add tally to AA46, in Y8 search for word 'orange' and add tally to AA47, in Y8 search for word 'banana' and add tally to AA48.
Take AA46/Y46 and put results in AB46.
If this could be put into on cell and perform all the needed actions, otherwise, multiple cell formulas is ok.
View 10 Replies
View Related
Apr 10, 2014
What would have to be done when a macro finishes to have a specific column show on the left side of the screen eg. spreadsheet has columns A:BC and I would like to have column A:K just off the screen with L:BC showing?
View 3 Replies
View Related
May 26, 2009
I have few problems with the below script. First I dont know exactly where I want the button to be placed since the data changes from week to week. Is there a way for me to place the button with in some merged cells? If so How can I merge some cells when I dont know where the data will end. I'm using this to find the last empty cell in Column "B" plus 2 cells down.
View 2 Replies
View Related
Jan 16, 2007
I've got an Excel worksheet that has 3 buttons on it. The worksheet may have some rows removed based on a parameter the user selects from a form. I've got the buttons placed where I would like them on the sheet, but if rows are deleted the buttons will move up depending on the number of rows deleted. I was wondering if there was any way to lock the placement of the button on the worksheet?
View 2 Replies
View Related
Apr 23, 2007
I have a list of People on one sheet and a list of Shifts on another. Some people have Qualifications (CPR, electirician, Non-Violence trained, etc.) and some shifts have Requirements. I would like to provide a (non-required) validation list for these entering these values. If the user enters a new requirement or qualification.
An explicit Validation list is too long. I don't want to use cells to hold a list that Validation can read from. So, my current plan is to a Selection_Change event to create/destroy a form ListBox, which will be populated by my VB code. How to place that is presenting some challanges. How to turn the user's multiply selected input into a comma delimited string is the easier of my two main challanges.
So, my concice question is when the user selects a single cell, how do I create a listbox that is possitioned over that selected cell? My non-concice question is: Is there a better way to go about this?
View 3 Replies
View Related
Feb 17, 2014
Is there any method to change the placement of conditional formatting icons. By default, the icons appear at leftmost part of the cell. Is there any way the icons appear at the centre with percentages (see attachment).
File: Sales Comparison - New Outlets 2012.xlsx
View 3 Replies
View Related
Feb 27, 2014
The following formula is all on one line. I want to do indirect for file name and tab in all instances it shows up. (I want to have the filename in one cell and sheet/tab name in another cell to reference the indirect to.)
How would I use indirect in the formula to reference the cells?
=INDEX('[Feb 2014.xlsm]TRADEDB'!$A$75:$Q$131,
SMALL(IF(('[Feb 2014.xlsm]TRADEDB'!$A$75:$A$131=$H$8)*('[Feb 2014.xlsm]TRADEDB'!$G$75:$G$131=$I$8),
ROW('[Feb 2014.xlsm]TRADEDB'!$A$75:$Q$131)),ROW('[Feb 2014.xlsm]TRADEDB'!2:2))-74,1)
View 5 Replies
View Related
Jun 2, 2009
I'm trying to nest if statements that also include "and" and "isblank" factors. The following formula isn't working, and I'm not sure if it's because of my use of isblank or lack/placement of parentheses.
View 3 Replies
View Related
Feb 8, 2012
I have created validated dropdown, which in turn I have used for conditional formatting to highlight specific consecutive rows based on the dropdown.
Is it possible for the worksheet to be positioned based on the dropdown chosen, so that the highlighted rows are visible without having to manually scroll down, looking for the highlighted rows?
If dropdown chosen highlights rows 50-60, I would like the page to automatically show rows 50-60 (not necessarily hide the others, but at least scroll to rows 50-60).
View 1 Replies
View Related
Jan 26, 2006
I need to match data in cell A to cell B and then if they equal I need to copy the adjacent cell C to cell X . How do I set up a macro to do this automatically? I have over 5000 cells to compare and match up.. I have Office 2003.
View 7 Replies
View Related
Aug 16, 2013
I'm wondering if it is at all possible to have a cell comment automatically update depending on what data is input in the cell (via user input, VLOOKUP, etc.)?
For example, if cell A1 contains the text "CHARLES" with a comment saying "Employee of the Month", and is then subsequently updated with the new text "JOHN" (again, via direct input, a VLOOKUP, data validation, etc.) is there a way to have the comment automatically update to say something else, such as "Team Lead" for example?
I've considered using VBA to accomplish my goal, but am unsure how to compose an effective code to do so. I've also considered perhaps creating a named table filled with all the different comment possibilities I would like to have used in this cell and then inputting a formula in either cell A1, or the comment contained therein, that would then call the corresponding text from that table based on the data in cell A1. Honestly, I'm not sure that what I'm trying to do is even possible;
View 4 Replies
View Related
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Apr 18, 2013
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
View 1 Replies
View Related
May 6, 2013
I would like to add a date to one cell (say A6) and have this do two things:
#1) this would add "Closed" to a given cell such a A5.
#2) and this would add a color to a group of cells like A1 through A8.
View 4 Replies
View Related
Sep 24, 2013
I have one column that contains a monetary amount (column AQ) , and another that contains text reading either "inflows" or "outflows" (column AC)
When AC says "inflows", AQ should be positive, and when AC says "Outflows", AQ should be negative.
I need the text in column AQ (the monetary amount) to become red when the the opposite is true.
i.e. When AQ is negative and AC says "Inflows", AQ should become red. And when AQ is positive and AC says "Outflows", AQ should become red.
View 2 Replies
View Related
Jun 19, 2008
I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.
Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:
Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3
Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob
So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.
Problem 2
Weekly league rank table that shows position movements week by week
Example.
Week1
1Jon
2Bob
3Fred
Week2
1FredUp 2
2BobNot Moved
3JonDown 2
Can Excel calculate/show the actual movements of league positions?
View 9 Replies
View Related
Sep 8, 2006
I have three cells in A2:C2 which require user to input some data.
What I want to achieve is to combine the data from A2:C2 in D2.
C2 is a field which user will input the date. He might key in 21/08/06 or
21/08/06, 30/08/06
I have tried using below formulas in D2 but without success.
=A2&" " &B2&" "&(C2)
=A3&" " &B3&" "&DAY(C3)&"/"&MONTH(C3)&"/"&YEAR(C3) (doesn't work if there are 2 dates.
I have attached a file which shows 3 scenarios if user input 1 date and 2 dates.
View 7 Replies
View Related
Apr 26, 2008
I have the following range of cells B2:Y3700. I want that when a value from 1 to 9999 is inserted in one cell of the above mentioned range, to copy the row number of that cell in the cell that is located in column Z and row is the number inserted in that cell. For example, if the number "1234" is inserted in one cell from range B2:Y3700, to enter in cell Z1234 the number of the row where is located the respective cell. At same the time is very important to me to not permit to insert the same number in B2:Y3700, so i believe that is need a macro code to check the cell from column z to see if value already exist .
View 5 Replies
View Related
Mar 25, 2013
formula to copy a cell to a new cell if the previous cell meets the condition.
i have attached an example work book.
so what im looking for is on sheet 1 there is a table and cell G9 shows Apples. on Sheet 2 is a second table where the information is in slightly different rows.
I want to be able to [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column D into Sheet 1 Column H (next to Apples)]
Then i would like in Cell J9 to look something like [When Sheet 2 Column C = Sheet 1 Column G Then Paste Sheet 2 Column F into Sheet 1 Column J]
and i would like Cell I9 to look something like [When Sheet1 Column J = Sheet 1 Column L Then Paste Sheet 1 Column M into Sheet 1 Column I]
G9 H9 I9 J9 L M <-- hidden C D E F
Sheet 1 |Apples| 20 | Hot |Average | Hot | Average Sheet 2 |Apples| 20 | AP | Average
View 1 Replies
View Related
Feb 12, 2014
I need to assign the ID value to the cell in the source column when it matches the cell value in the email column.
i.e from the email column the first cell value is bobjohnson@email.com his ID value is 0 I need to find all the cells with bobjohnson@email.com in the Source column and assign them 0.
[Code] ......
View 2 Replies
View Related
May 8, 2009
I have a spreadsheet with details of letters that should be responded to within 20 days, and i want to have a cell showing the amount that that need a response within 10 - 5 days. Basically I want to have a value of one returned to a cell in a row if one cell in that row contains a value between 10 and 5 (less than 11, more than 4) and another cell is blank. For example, AD27 contains 6, k27 is blank. I want AE27 to show 1. I also need the same if the value is less than 5, but i'm sure i could figure out how to alter it.
View 2 Replies
View Related
Aug 1, 2007
i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
View 3 Replies
View Related
Feb 26, 2009
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
View 2 Replies
View Related
Feb 3, 2009
I'm trying to create a supply order form. Is it possible to enter a product name in one cell and have the price for that product automatically appear in another cell? Is there a formula that I can use to make this happen?
View 2 Replies
View Related
Aug 13, 2013
SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
View 9 Replies
View Related
May 9, 2012
I have the following columns that return cover period dates.
Start of Cover PeriodEnd of Cover Period01-Nov-0631-Jan-0701-Jul-0831-May-0901-Dec-0930-Jun-1001-Jan-1131-Dec-10
I however need a macro that will delete the cell contents if the "Start of Cover Period" (column AK) date is > than the "End of cover period" (column AL) date.
Thus it must compare ak2 with al2 and if ak2>al2 then clear both cells. if AK2
View 2 Replies
View Related
Jan 3, 2014
I want to populate cell with a value(from another cell) as per count in another cell.
Say ex.
1. CELL A1 having Value 1000.
2. CELL B1 having Value 10.
3. Column C, should be updated with value of A1 cell as B1 cell times. How to do that.
View 1 Replies
View Related
May 27, 2014
Attached is a sample of what I am working with.
For some reason when pulling this report into excel, the description is under the part number and the ordering information is on the line with the part number. What I am trying to do is have the description move up one row and over one column if the value in C is blank on the same row. All of the information should be on one line. This report can have hundreds of records so I need some kind of looping code to get the end product where I need it.
example1.xlsm‎
View 2 Replies
View Related
Dec 10, 2012
whenever the active cell is within a given range, highlight the cell on the same row in column S (by changing its interior colour). This should occur each time the active cell is changed, whether by cursor keys or mouse. The effect would be similar to the row and column highlights at left and top of the worksheet.
This action should be restricted to one sheet in the workbook.
It's for Excel 2003.
View 3 Replies
View Related