I used The code below to Filter
ActiveSheet.Range("$A:$N").AutoFilter Field:=10, Criteria1:="0.00"
it work good but I am trying to change the criterial vlue to be TextBox1 value I try Criteria1:= UserForm1.TextBox1.Value and Criterial:= " & TextBox1.Value & " But It didn't work
the macro should begin by loading a form with a textbox.
load UserForm1 'i suppose
then instead
range("b1").value = 60
set 60 (or a value that i like) in the TextBox1 then start the countdown in TextBox1 instead in cell B1
I was windering how I'd set whatever I type in to textbox1 it would copy this to textbox2 on my userform?
I have a simple program with 3 textbuttons. It takes the value from text box1 and text box 2, and it should add the 2 numbers and display it in textb ox3. How can I add the value from text box1 and text box2 and display it in text box3 ?
VB:
Private Sub TextBox3_Change()
TextBox3.Value = CInt(TextBox1.Value) + CInt(TextBox2.Value)
[Code]....
When you include code in a message, use code tags. These format and colourise the code and are required regardless how long, or short, the code snippet. Tags are added simply by highlighting the code and clicking the '#' button on the toolbar
I need to allow only in textbox1 Numbers & decimal Point.
View 4 Replies View RelatedIn Userform
I M Using 5 Textbox
In Textbox1 If I Type Value = 5
Then
All other textboxes auto filed by the value of Textbox1
Result Should be
textbox2 = 5
textbox3 = 5
textbox4 = 5
textbox5 = 5
I'm creating a few textboxes in runtime. How would I get these textboxes created to hide? I've been trying
View 14 Replies View RelatedI have a userform with 10 textboxes which will all contain a time in HH:MM format. Could I have the userform to fill the textboxes with a default value once a time has been entered into textbox1. I would like the default value to be the time from the previous textbox plus 30 mins.
eg. So if I enter 14:00 into textbox1 I would like textbox2 to display 14:30, textbox3 to display 15:00.
If this is possible, could I add a Listbox with the options 1 to 10. Then would I be able to only uses the textboxes based on the number selected in the listbox. So if I selected 2 then just Textbox1 and Textbox2 would have values in them. For 8 being selected then Textboxes 1 through to 8 would be filled.
Sheet1 has following two columns
----A----------B
01-07-2007---10
01-07-2007---20
02-07-2007---30
02-07-2007---40
02-07-2007---40
03-07-2007---60
03-07-2007---70
03-07-2007---70
03-07-2007---90
04-07-2007---100
04-07-2007---110
Sheet2 has following three cotrols
Textbox1=02-07-2007
Textbox2=03-07-2007
combobox=?
I want to Extract Unique values from column B between date range textbox1 and textbox2 and finally how to add these unique records in combox1
I've searched the boards & haven't found anything as uncomplicated as what I'm looking for. I know I could use Sumproduct, but for something this simple is there anything I can do with Sumif? This in effect is my worksheet.
AB
1AD200=SUMIF('Sheet2’!B:B, A1, 'Sheet2’!C:C)
All I want to do is change the criteria to be the equivalent of A1 OR B2 (ie checking the range for either match. No way to do that in a sumif? I'm looking for the least complicated, easiest to adjust/edit formula possible.
I have a series of data that I am trying to process based on various criteria and though this site I have solved most of the (simple) problems I had. I have one last problem to solve.
I need to add the previous cell to the next one based on a cell value in a different column.
Example: I want to add F2 to F3 if H3=3 but I need it to work so that if H4=3 it will add F3 to F4 and F3 now equal the new value i.e. (F2+F3). If H5 doesn't = 3 then F5=F5. I need the output to be a value not just an equation as I plan on going back and deleting all rows with H=3 in them.
P.S. I don't mind if the output of the calculation of the F column is to a new column or overwrites F. Overwriting would be easier for when I go back through and delete rows based on H=3.
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
Is it possible to have a macro to do these tasks?
I would like to change the ranking between two rows based on some criteria with macro.
View 6 Replies View RelatedI have gotten good modifying existing ones to fit my purpose but still have a lot to learn about creating them. I would like help in creating a macro that would search out several sheets (JanD.....DecD) and search for names in column K and a location name in column L. If the contents of the cells do not meet the criteria of name and location then I want the name to be changed to "OTHER".
View 9 Replies View RelatedI looking for a solution to change a Access Query Criteria using a VB code in Excel, without opening the Access DB and changing the criteria manualy?
My normal Job is it:
1) I Work all the time in Excel
2) At the end of the work in Excel, I need to open Access
3) Open a query (Called "MyQuery")
4) Change one parameter the Date: Between 01/10/2008 and 30/10/2008 (This for each month)
5) Run the query
I looking to get rid of points 2) to 5) by replacing with a Command button on an Excel sheet
Sub Change_Criteria_And_Run_Query()
Dim mydbase As Object
Set mydbase = CreateObject("Access.Application")
mydbase.OpenCurrentDatabase ("C:My doucmentsDB1.mdb")
mybase."MyQuery"."Date Criteria" = Between (Worksheet("Sheet1").Range("A1").value) and (Worksheet("Sheet1").Range("A2").value)
>>>>>The above line of code I have problems to get right!
mydbase.DoCmd.RunMacro "MyQuery"
End Sub
I am trying to achieve the following and am not certain how to achieve this in Excel 2003.
1. make the Criteria Range Dynamic in Advance Excel, so that the Filter automatically updates on every Criteria change.
2. Raw Data range is kept in Closed workbook
3. Filtered Result displayed in another Workbook.
I have a worksheet that when a row changes based on the value of column B, I want to remove all of the formulas found in the row but keep the existing values, and then change the color of the row.
In the sample file attached, when the value is "Closed", that row will keep the existing values and then it gets grayed out. Rows that are still marked "Open" need to retain the formulas in case other information changes.
I have tried copy/paste special using autofiltering but that doesn't work because of the hidden lines. This file changes on a daily basis and I need a quick way to update the file.
SampleFile.xlsx
I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedI have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
Is there a way to provide filter with a list of criteria but when it doesnt match all of the criteria it still uses the filter on the criteria that it does match?
E.g i have this code
ActiveSheet.Range("$A$7:$N$31997").AutoFilter Field:=1, Criteria1:=Array( _
"A", "B", "D", "E", "H", "I", "R"), Operator:=xlFilterValues
However sometimes for example B will be missing, or H or B H I will be missing etc... is there a way to provide all of the criteria and it will not error if the criteria is not all there?
I want to change value if i change products from drop down list.....
For more information please find attached file: Book.xlsx‎
I want to drag a formula however i want one of the values of the formula to change and the other not to change. for example:
c1=a1+b1
c2=a1+b2
c3= a1+b3
: : :
how can i make it do this when i drag? a1 is not just a constant and it depends on other parameters.
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
I'm coding a userform where there are some comboxes which are popolated by values coming from Sheet2. Up to now I work it out (maybe its not elegant but it works).
Now I would like that when the user selects one combobox the values of the other comboboxes are set accordingly to the grid in Sheet2.
Please download the XLS file at: [URL]....
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before:
Column A Column B
one test
one test
two test
two test
three test
three test
After:
Column A Column B
one test
one test
Coz two............................
