Made a macro to Copy a value and paste is as "Special" for Value only.
The problem is it won't function correctly Unless I force a switch to the sheet where the calculations are. (Which I want to avoid)
The current code is:
I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.
Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub
Even assigning value to variable does not work:
Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub
how to restrict the macro to change the value of current/active cell only without effecting other cell values?
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
View 2 Replies View RelatedI was looking for some code that I could change the data in cell E5 to "Bom RevD" on all sheets in my workbook.
View 2 Replies View RelatedI have a code that clears the content of a cell if the value of that cell exceeds two.
Code:
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
If Cells(1, 1).Value > 2 Then Cells(1, 1).ClearContents
End Sub
My problem is the value of this cell comes from a function and changes every second automatically (linked to a data feed). So I'm not changing it manually, therefore my code is not working unless I touch it. I just wanted to ask if I can add a code onto this which checks the values and runs the ClearContents macro if there is any change.. I've got a few sheets like this so I need this to run in the background..
Moving between different sheets changes the procedure window, which is a good thing, but can also can be error prone and annoying to search through several windows searching for the procedure or module currently working on. Is there a setting somewhere to prevent VBE from changing the current procedure window?
View 4 Replies View RelatedI have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I currently maintain a program that creates an Excel report. The report is full of formulas (mostly vlookups).
After the report is built, I'd like to get rid of the formulas. The only way I know to do this is to copy the report and do a paste special values.
I want a functionality in a sheet wherein if i select a value from a drop down, i will get specific fields to be entered in the sheet below and when i select a different value from the drop down the fields to be entered should change.
View 3 Replies View RelatedBased on the attached (much simplified) spreadsheet, I want the values in the green cells on the "Month" page (B6:B10) to vary depending on the value in the yellow cell (B4), and for these cells to to look up the relevant column in the "Full Year" page - i.e. if B4 (on "Month") = Jan, look up C6:C10 in "Full Year"; if B4 = Feb, look up D6:D10, and so on. I know I can nest IF functions in order to achieve this, but could be a bit messy. I'm sure there must be a simpler formula within Excel ... just don't know what it's called!
View 3 Replies View RelatedI am trying to do is to write a code that will change the values of cells B17:B25 to "false" when the user selects "true" from the drop-down box in cell B16.
Here 's my
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "B16" Then
If Target.Value = "TRUE" Then
Range("B17:B25").FormulaR1C1 = "FALSE"
End If
End If
End Sub
This is not working! Nothing happens when I select "TRUE" in cell B16!
How to copy and paste conditional formatting with our changing the cell values. My first row of data starts in row 4 and here is what I have in D4
If D4 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D4
Now I want to copy that format and paste it for all rows in column D. The problem I'm having though is when I paste the formula it doesn't change to match the row I'm on. For example, when I paste it in D5 this is what I get
If D5 is less than or equal to AA4, AW4, BS4, CO4 then it will highlight D5
How do I paste it so that it will update to show AA5, AW5, BS5, and CO5. I want to be able to do this for 500 rows.
I have multiple sheets and a summary sheet in the beginning. and i need to populate the min value / max value and the avg value for every sheet into the summary sheet.
Example i have a column of numbers in column G and i need the min , max and round(avg) for all sheets in the first summary sheet.
how I can change the color of an autoshape based on a value in a cell?
View 4 Replies View RelatedI did a search on this site and found some code I was looking for (see link:
http://www.excelforum.com/excel-prog...e-in-cell.html - Leith Ross's response code).
The code works perfectly, however, if I save the workbook with a different spreadsheet on top than the spreadsheet referred to in this code, I get an error message: Method 'Range' of object '_Worksheet' failed.
I should state that I did change "Private Sub Workbook_Open()" to "Private Sub Auto_Open()".
I assume I need to modify the code but am unsure as to how.
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies View RelatedIs there a way to change the value of cell A1, for example, from one value to another, hit the enter key, and activate a macro this way.
A couple of qualifications:
- the value in cell A1 will never be the same (that is it could be -23.43 or .12)
- I can not simply tie the macro to the "enter" key as there will be numerous cells (A1, B3, C90 and so on) in the same sheet that I will need to do this with, each tied to a different macro.
I would like to write a macro that performs the following function:
I have a value in cell A1
In cell A2, I have the formula "=A1"
I want to make it so that cell A2 can never be directly changed; the only way to change the value in A2 is by changing A1. A2 should always equal A1.
I want a message box to pop up and alert the user whenever they attempt to modify A2, instructing them that if they wish to change A2, they have to change A1.
I had written this macro, and it kinda does the trick:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("a2") Range("a1") Then
MsgBox "text goes here"
Range("a2").Value = Range("a1")
End If
End Sub
When I attempt to change cell A2, I get the MsgBox popup and it works how I want it to. However, when I alter cell A1, I get the same popup before cell A2 updates (to be precise, the popup occurs after I click another cell). I would like this to be immediate and without a MsgBox.
I am writing/creating macros and I want to create one that will automatically run when a cell value is changed to a certain entry.
View 2 Replies View RelatedI am currently working for data validation team. I have to validate tons of data every week so it would be great if i could remove dupicates.
I want to compare two worsheets, sheet 1 has the order number with description (which i have to find) for the current month and sheet two has got standard report from the past week giving all the order numbers with no description. I need a VBA based macro to find all matching order numbers which are in sheet 1 column A, in sheet2 column A and return the corresponding value in column B in sheet 2 and also return the description in Column C.
I have an excel workbook with 60 sheets (each contain data in the same categories and in the same column locations, just different information on each sheet). What would the VBA code look like if I wanted to manually enter the find and replace values and perform the function (find and replace) across multiple sheets in the workbook?
View 5 Replies View RelatedI have an excel sheet which is protected (mainly so that the users will not change any formulas) the excel sheet is basically a list
Just to put you in the picture
Column B Is PO Number
Column C Is Remarks
Column D Date
Column E Description
Column F Supplier
Column G Amount
I would like that when Column C changes to "OK Checked" column B C D E F G are protected and locked. But obviously for that particular row.
For example the input of Cell C15 changes to "OK Checked" then B15, C15,E15,F15,G15.
the macro must NOT be fixed to a particular row (in this case 15)
When a change is made in cell L11, cell N11 should be locked automatically for typing. This is true for the cells between L11:L25, and cells N11:N25.
I have been trying to come up with a code that will:
1 - start my macro when f.ex. L11 is > 0
2 - lock N11 when L11 is filled out
3 - unlock N11 when the input in L11 is deleted
This is my attempt so far to put together a code:
[Code] .....
I'm using Excel 2010.
I've got a workbook with about 1,000 worksheets in it and I need to add up the values across the sheets from the same cell reference. I can get this bit to work with this formula:
=SUM('1:2241'!BJ3)
So this adds up the contents of cell BJ3 across all worksheets located between 1 and 2241. However I also need to count the number of times a zero appears (zeros only not blanks) so I thought this might work:
=COUNTIF('1:2241'!BJ3, "=0")
However it just returns the #VALUE error.
I have Information found on Sheet 1. I need the program to take the value found in Column B and try to find matches found on Sheet 2 in Column B. Here's the thing it is only going to take the first 3 characters found in the Cell on Sheet 1. But in sheet 2 it will need to pull all information that matches those 3 characters. I included a sheet on what the finished product should look like for two of the sheets. If the program finds a match it will transfer the original and the copied match to a sheet Named "Name". The correct format can be found on "Finished Sheet Name". If no matches are found it will place the original information from Sheet 1 onto a sheet called "New".
Test2.xlsm
I am trying to make a button that will re-initialize the workbook: clear (delete) all unlocked cell's values. I have the following
View 5 Replies View RelatedI'm looking to perform a Find and Replace over all text boxes on all sheets.
I found this vba over at excel ribbon.tips which does the trick, but only works on the active sheet... I'm looking for it to work over all sheets. I'd also like it to look for 2 different instances.. For example, Find A replace B, and Find C replace with D.
[Code] ....
I have bunch of sheets lets call them
Germany, France, Belgium, Poland, Russia, Data
In the data sheet I have in F1 "Germany", F2 "France", H1 "Belgium", H2 "Poland", H3 "Russia"
In each of the sheets (appart from data) I have a validation list in cell D6 listing the data sheet values F1,F2,H1,H2,H3.
Now basicaly what I need is when I select Germany from the list it would take me to Germany sheet, when I select Belgium from the list it would take me to Belgium sheet etc.
Basically the sheets have always same name as the name in the list. I know i can write the code in individually but because I have a lot of these I was hoping there might be an easier way?
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain()
Application.ScreenUpdating = False
Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range
findThis = "1"
[Code]....
I have a long list of tabs listing "projects" which have changing names - on the first sheet, I want to have the table of contents automatically update and link to each tab - I want the user to only have to change the tab name to have the table of contents and link update -
View 5 Replies View Related
